Update KB982214 repeatedly fails to install (Windows 7)

Similar Questions

• Vista updates repeatedly fails to install (error 800b0100 code and 80073712)

  original title: Vista updates repeatedly fails to install

  I get 80073712 and 800 b 0100 error codes when you try to update for Windows Vista (KB968389),

  Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 86, and update for Windows Vista (KB975467) ISecurity. I tried the patch but no luck.  How can I download these updates?

  Download and run the system update tool.

  (http://support.microsoft.com/kb/947821/)

  Try to install updates again.

  Note After you run the tool, the Checksur.log file is located in the following location:

  %SystemRoot%\Logs\CBS\

  In a default installation of Windows Vista, this file is located in the following folder:

  C:\Windows\Logs\CBS

  A general solution, *IF* is no malware problem, would be to run the system update tool.

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

  08/15 / 1104:45: 22 am UTC

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• KB951847x86 fails to install Windows Update

  original title: windows update KB951847x86

  I have repeatedly tried to get this update. Whenever he fails. I never see a code error or a reason to explain why it does not. What else can I try?

  bhershey

  Hi bhershey,

  Try the following:

  Step 1: Locate the installation error code.

  To do this, follow these steps:

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number.

  Step 2: Reset the Windows Update components, and then install the update. Visit the following link and click on Fixit.

  How to reset the Windows Update components?

• Update KB2183461 repeatedly fails with error 0x800736b3 on Windows 7 x 64. __

  This update has been now fails on my machine for at least a month:

  Cumulative Security Update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461).

  The error code is 0x800736b3.  Details below...  Does anyone know a solution to this problem?

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 2010-08-23 08:44:46
  Event ID: 20
  Task category: Windows Update Agent
  Level: error
  Key words: Failure, Installation
  User: SYSTEM
  Computer: HKS - PC
  Description:
  Installation failure: Windows failed to install the following update with error 0x800736b3: Cumulative security update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461).
  The event XML:
  
   
     
      20
      0
      2
      1
      13
      0 x 8000000000000028
     
      82924
     
     
      System
      HKS - PC
     
   
   
      0x800736b3
      Cumulative Security Update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461)
      {34BD5FB0-047D-4786-B0F1-C4393CC67875}
      103
   
  

  Thank you!

  HKS

  SOLVED!

  Install this hotfix from Microsoft who fixed the instances on the failure of the automatic Windows Update on updates...

  http://support.Microsoft.com/kb/947821

• A security XP KB970430 update repeatedly fails to install

  Updated security KB970430 downloads to my computer several times, but fails to install. someone has ideas about how to install this update or keep him repeat download

  KB970430 is an option, not the security update. Feel free to hide it.

  UTC/GMT is 16:47 Friday, December 23, 2011

• Vista update repeatedly fails to install

  Problem: I've tried several times to apply the latest Windows updates to my Vista Home Premium (SP2) system. Everytime I try I am informed that the update failed with error code 80070020. (During attempts to update it tells me that the updates may not be configured correctly).

  After checking the error code 80070020 on the Windows site, I tried both a) disable the antivirus software (Avast) b) perform a clean full reboot
  None of these works
  Please notify

  Arthur White

  ****************************

  Additional information updates include - 9 'Important' updates including the various updates of security such as KB2507938 - 8 optional upgrades such as IE9 are my details of software - Vista Home Premium SP2 - Windows product ID 89578-OEM-7318027-96169 hardware is assembled by mesh:-processor Intel Core 6600 2.4 Ghz 2 GB 32-bit , operating system: Windows Vista.

  I have already submitted a request on the site SUpport and Microsoft Help (see link below) and used Diagnostic tool, but they don't have a tell asking me the same question here (not very useful)

  Points:

  (1) I only wanted to read this:

  .... Then, I found that the update had apparently been installed months ago ...

  (a) you can rename the folder C:\Windows\SoftwareDistribution, but much better is used this FixIt:

  http://support.Microsoft.com/kb/971058

  Perhaps this might help and updates would not be on the list of the automatic updates because they are already installed.

  (b)-

  (c)-

  (2) is OK, how I already wrote - "gmreadme.txt" - is only a txt file.

  Try looking in history ofupdatesif updates are already installed.

  LC

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Updates failed to install Windows error 0 x 80240036

  Original title: I can not get updates, it keeps going to the error message

  whenever I go to windows update it begins searching for updates, and then goes to an error [error number: 0 x 80240036 how can I solve this]

  Hi Jerryrollings,

  You receive an error message while checking the updates, download or installation of updates?

  Method 1:

  
  I suggest you run the fixit from the link below and if the problem persists.
  The problem with Microsoft Windows Update is not working
  http://support.microsoft.com/mats/windows_update/.

  Method 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

  Also try to get the update number that was not installed and the details of the error.

  For more information:

  (a) click Start, click all programs, and then click Windows Update or Microsoft Update.
  (b) click view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer
  (c) in the status column, locate the update that do not install and then click on the red X.
  A new window opens that displays the installation error information.

• A security update that kb967321 fails to install

  When you install the update of security for MS Office System KB967321 it will fail to install. I get an error code 646. How to solve this?

  tjpanont,
  You should go to the Microsoft Download Center and search for each failure KB.  Then download the file to your computer and install it manually from here. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• CC 2015 fails to install Windows 10

  I need help!

  I upgraded to Windows 7 Ultimate for Windows 10 Pro. My previous hard disk was damaged, so I bought a new to install Windows 10, which means that I had to download new. Which includes! Creative cloud. I've downloaded the installation program, but when I run it it closes right after like 2 seconds. No error message, no notification of any kind. It just stops. It worked perfectly on Windows 7.

  I tried as an administrator, did not work.

  I tried the Troubleshooting compatibility and he says that it is not compatible, which is ironic due to the fact that the release notes on CC 2015 says that it is now compatible with Windows 10.

  I'm in the middle of the finals at the College and I'm really desperate to find a solution.

  Thank you for your help Jeff A Wright. I do not tried this last suggestion.

  Instead I used the solution 2 of this topic error: "unable to install". Creative Office Cloud. It has helped me!

  After following the instructions of "Solution 2: run the Adobe CC Cleaner tool" I re-installed the creative application of cloud and it now works!

  Thanks anyway!

• Fusion 3.0.1 fails to install Windows 7 x 64

  I paid $39 for the upgrade of Fusion and I can't install Windows 7 Ultimate (x 64) - DVD (English) (en_windows_7_ultimate_x64_dvd_x15 - 65922.iso) downloaded from the MSDN site.  I am running Snow Leopard on a Mac Mini with 4 GB of RAM...

  Here is the message I get.  If someone from VMWare can get on it?

  Thank you

  Dave

  

  RParker wrote:

  The ISO file does not have to be exact, you can rename it.  So I would like to do something a lot more small, like WIN7PRO.iso or something.  It could be that the file name is causing a problem.

  It is not the long file name, the OP has already said that he has downloaded a copy truncated the ISO (800 MB) c. of the real size of ~ 3 GB.

• Update for Windows XP (KB971029) repeatedly fails to install

  Update for Windows XP (KB971029) repeatedly moved and I get the error: 0x80072EFD. Any help?

  Consult the below Microsoft article and try the steps mentioned and check if it works.

  http://support.Microsoft.com/kb/836941/en-us>

• Update KB2446708 has repeatedly failed to install, citing 66A error code.

  Optional updates succeeded where this is important and some recommended to those who do not. Help and troubleshooting suggestions were followed, but in vain. Is there a way to delete all updates failed and regain some lost speed, not to mention allow updates installed?

  Hi Ed,

  First try the solution at this link: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992&displaylang=en&lc=1033.

  If this does not work, remove Microsoft .net Framework 4.0 using the .NET Framework Cleanup tool http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx.  And then reinstall the Microsoft .net Framework 4.0 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0a391abd-25c1-4fc0-919f-b21f31ab88b7&displaylang=en and then install the update, you are having problems with.

  If this does not work, try resetting update (including a fixit) components: http://support.microsoft.com/kb/971058

  If this does not work, try a manual download by putting the KB numbers who fail looking here: http://www.microsoft.com/downloads/en/default.aspx and download them directly and see if it works.

  If this does not work, go to C:\Windows\SoftwareDistribution and remove content (but not the folder itself) and then restart.  See if that helps.

  Remove updates failed won't find you any lost speed - although if it could be done, it might be useful save you some space (assuming that all who uploaded was saved even if it has failed).  It also will not help install new updates.  It's a totally different question that hopefully will solve the above.  If a solution works for some but not for all of them, then try the other options to see if they can help as well in terms of everything attaches.

  If this does not help, please repost in the forum for the correct Windows version from: http://answers.microsoft.com/en-us/windows/forum/windows_update?page=1&tab=all&tm=1300700638376.

  I hope this helps.

  Good luck!