Update messed up my computer, help.

When I came to my computer, Windows Vista home is what has been installed. Last night I updated my computer for the first time, he has completely updated and after the update it was working fine last night and the rest of the day. Today, the update apparently got stuck in the final (3rd) part of the configuration process. He sets up, stops, then immediately on reboot loops right of return to step 3 in the update configuration. It is a loop in the configuration, restart, again and again. I still have to get to the login page for my profile. What should I do?

Hello

See if that helps you.

Do a Safe Mode system restore to before the problem started.

http://bertk.MVPs.org/html/restoresysv.html

How to access Safe Mode

http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

Here is the guide to repair Options using a Vista DVD from Microsoft.

If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

Unfortunately, you have to buy it.

Here is a link to it:

http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Some tips on using Windows Update:

Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

'Remove an update'

http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

"How to hide or show an update of Windows Vista"

http://www.Vistax64.com/tutorials/72491-Windows-Update.html

 

Here's how to chanage update settings, if you think it is necessary to:

"Understanding Windows Update and Extras in Windows Vista and Windows 7.

http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

See you soon.

Tags: Windows

Similar Questions

  • Update Messed Up my computer

    I downloaded the updates yesterday, and when I restarted my computer, today, missing my files on my desk and the computer has been revamped to the day I bought it. Everything I had set up on my computer (email, settings, files) had disappeared. Don't know where to start that everything is back to normal.

    First thing to try is a system restore.

    Disable your anti-virus software before using System Restore.

    Try a system restore to select a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose a different time to before the updates > next > etc.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows is mess up my computer - HELP!

    My computer no longer Broadcom 802.11 network adapter accepts. Replaced by a new adapter Bluetooth of Broadcom Broadcom. The problem is that Windows continues CONSTANTLY reinstall the old adapter - VERY BAD! I had to reinstall EVERYTHING completely 3 times because of this. I crossed gpedit.msc and blocked reinstillation but a day or more later, they bypass it and reinstall it again!  Please, if there is anything else I can do make me know! Thank you!

    Lydia T.

    Hello

    Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

    You only need the latest drivers for them since by the hardware manufacturer real site or if you already have, as normally, does Microsoft or those who have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer of supply, etc., etc..

    But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update'

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or show an update of Windows Vista"

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html

     

    Here's how to chanage update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

    See you soon.

  • Windows Update has messed up my computer...?

    I was going to restart my computer and saw the update windows... so I decided to update my computer so... When windows has finished updating and reloading... He would work for the first minute or so it would freeze... Freeze not literally... but nothing will work and I can still move the mouse but the mouse icon would be stuck in this symbol of loading... (the little blue circle)

    At the beginning I thought I would just let it finish loading all that computers in train load... but 30 minutes later, its still stuck on loading... I did a hard reboot, and the same thing would happen... 30 seconds - 1 minute to load windows it would freeze just about anything under its weight...

    So I thought the windows update screwed up my computer... I loaded in safe mode and tried to do a system restore, only to discover that my computer system restore has been disabled! ??? ... so now I have no idea what to do... someone please help me I have a lot of work to do... Thanks in advance

    on the top of my head, here are my computer specs:

    Windows Vista SP1
    Intel Core i7 940
    12 GB of ram
    NVIDIA FX 1700

    Update on the situation:

    I've posted on several technical forums and 2 of them have been asked to go into SafeMode Add/Remove programs and uninstall then windows updates...

    The problem with that is that my computer does not record the fact that he just installed an update... It is said that the update performed on the computer has been on the 17th of September... the date today here is Sept. 23...

    I uninstalled the 2 updates from 17 without prevail... the problem persists... I load windows in normal mode... and 30 sec-1 min later it freezes just on loading things...

    Should I just keep uninstalling windows updates until the problem is solved?

    No answer to this problem... two days of discussions of the forum tech 6... 1 hour 4 telephone conversation with microsoft support technology... end result? Reinstall Windows... GG

  • Cannot update Vista SP1, the computer restarts and goes into repair mode.

    Im trying to install SP1 on a laptop with Vista installed. Everything is fine and the installation complete the part 2 or 3, then restarts. After that, I'll get the progress bar of vista for a few moments, then the screen goes black for a bit and then the computer restarts. If I restore to before SP1 has been installed on the computer is fine. I've run the preparation tool before installing SP update and that did not help either. Last know well is no help either. Any ideas?

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Important: How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791/
    Support for Windows Vista without service Pack installed will end on April 13, 2010. To continue to receive updates for Windows security, make sure that you are running Windows Vista with Service Pack 2 (SP2). TaurArian [MVP] 2005-2010 - Update Services

  • I uninstalled Office 2010, this has messed up my computer > failed to send the email and my old Office 2002 none no longer works

    I uninstalled Office 2010, this has messed up my computer > cannot send the email and my old Office 2002 none no longer works

    My Office 2010 Professional Plus activation failed because I exceeded the number of facilities on my computer.  The computer on which the activation failed now on has many damaged programs operational.  Outlook Express 6 does not emails, send him previously installed Office 2002 does not work, and the computer is extremely slow opening of web browsers and download content.  System Restore did not restore anything at all.

    After the activation failed I of course used Add/Remove programs to uninstall Office 2010.  This is when all programs no longer works correctly.

    Hi AJ 400,.

    ·         What happens when you try to send mails?

    ·         You get the error message?

    ·         Who are you referring when you say "when all programs stopped working properly?

    Follow these methods.

    Method 1: Follow the steps in the article.

    http://support.Microsoft.com/kb/813514

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

    You can also post your query related to the Microsoft Office products in:

    http://answers.Microsoft.com/en-us/Office

  • Downloaded a program that has messed up my computer

    original title: I downloaded a bad download.  It has really messed with my computer.  Can anyone help?

    I think it's real unlikely that I deleted some of my good files.  What I can do.  I can't defragment defragmentation more.  I reported this bad program download for the FBI, the Federal Trade Commission, the Canadian Division of the fraud and a little more.  I inform the company and demanded that they extract the program.  They wanted me to pay $129.00 to remove FREE download!  I refused, talked with a supervisor told him that I had contacted the FBI, etc. and demanded they remove for free.  I've also removed all downloads, my computer showed for the time, including good I think.  Ads come LOUDLY in the middle of the night, my computer malfunctioned, and I constantly get attacks of sites of Trojan and virus attacks.  To date, AVG has taken all the.  But I'm really scared that I messed up my computer.  What can I do?  I'm handicapped in terms of technology, and I am really stressed.  I have spent so many hours on my computer, I restored until one month before and it does not help.  Can someone help me?  Thanks, Peggy

    Hello

    ·         What happens when you try to do a defragmentation of the disk on the system? You get the error message?

    ·         What program are you referring to and who is the manufacturer of the program?

    ·         What you computer is malfunctioning? Please provide details

    I suggest you follow the steps mentioned below.

    Method 1:

    I suggest you do a SFC (System File Checker) scan on the system. Follow the steps mentioned in the link mentioned below.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Method 2:

    I suggest you perform a disk cleanup on the system to remove unwanted programs from the system. Click on the link below.

    Description of the tool in Windows XP disk cleanup

    http://support.Microsoft.com/kb/310312

    Method 3:

    I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.

    http://OneCare.live.com/site/en-us/default.htm

    Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.

    Microsoft Security Essentials

    http://www.Microsoft.com/security_essentials/

  • Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

    I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

    Log name: Application
    Source: Application error
    Date: 21/07/2012 10:40:20
    Event ID: 1005
    Task category: (100)
    Level: error
    Keywords: Classic
    Description:
    Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.
    Program: For the Windows service host process
    File: C:\Windows\System32\wuaueng.dll
    Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.
     
    SOLVED!

    Hello

    Follow these methods.

    Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

    To save the c:\windows\system32\wuaueng.dll file, follow these steps:

    a. click Start, type run.

    b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

    c. When you receive the following message appears, click OK:

    DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

     

     Method 2: If this does not help, you can reset Windows update components and check.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  • I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

    I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

    original title: error code 80070005

    Help us help you: start by reading this post 'sticky '...

    What information to post in the Windows Update forum
        http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  • If anyone knows my ip address, they can send me viruses or mess up my computer through the internet. If they can, how?

    I want to know if I give my IP address to a person, can they mess up my computer via the internet. What risks I remember myself one they know.
    Thank you

    Hello

    Know your IP address is only 1 step in hacking your computer. They would also be
    need to fill your firewall - would be in your router and the other
    the Windows Firewall. Also on your file sharing and printing OFF unless
    you really need to share. Make sure that your antivirus/antispyware is
    also often run a hack is preceded by a Trojan horse that allows access.

    IP hacking - read some of these
    http://www.Google.com/#sclient=psy&hl=en&q=hacking+IP&AQ=f&AQI=G4G-O1&aql=&OQ=&PBX=1&BAV=on.2, or. & fp = b1e36b249b6c036d

    Practice Safe Hex.
    http://www.Claymania.com/safe-hex.html

    Possible, Yes? With all the protection levels defined, very unlikely.

    I hope this helps.

  • I messed up my computer

    I sometimes ache to see what is on the screen, text and icons.  This is a new computer for me, so I tried to solve this problem.  Now I can't get it back as it was, and the whole is even smaller.  Can you help me?

    Your first post on this topic has received a response.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/i-messed-up-my-computer/e16310ce-f00e-440F-b358-125a348bcf57

    If the suggestion did not work, there simply answer a Word to say so. Please, don't start several threads for the same question.

  • Update KB971033 allows my computer to start normally

    Hi I recently built a computer and used the operating system windows 7 home. However, when I restart my computer after that windows update KB971033 downloads my computer does not start normally. The reason for that it starts is not due the file ' / C:/windows/system32/drivers/iastor.sys' be corrupted. I had to wipe my hard drive and reinstall all drivers and the windows twice now. I looked in the update and know it's for the prevention of piracy but I bought my drive from windows 7 legitimately to a well known store. The update always occurs about a day after I installed windows as well if that helps. Does anyone know why it keeps happening? I know this isn't my computer itself.

    Set up your computer to download updates manually.

    Review of the update, right-click and click Hide.

  • Can I transfer service CC if I update to a new computer? The tutorials have unlimited access?

    Can I transfer service CC if I update to a new computer, somewhere down the line? The tutorials have unlimited access?

    Hi davidm33642164,

    You can certainly use CC on your new computer, because CC allows a maximum of 2 activations http://www.adobe.com/legal/licenses-terms.html

    Below you will find useful information

    https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

    And yes the tutorials have unlimited access.

    Hope that answers your queries

  • After the recent update to iTunes, my computer is not recognized in iTunes game.

    After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

    Hello

    Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

    Jim

  • It is safe to connect to the internet to update XP if the computer has not been used for a good year or so?

    Hi all - I have another laptop which has remained unused for probably over a year or more, and I want to start using it again. It works under XP, and currently has Service Pack 2 installed. My question is: is it safe to connect to the internet now and start downloading all the required Windows updates? My concern is that, as just like the anti-virus, firewall, even Windows itself have not been updated in so long, it would be imprudent to start the internet connection at this point? Is it safe to go forward and to connect and update, or is it better to download updates etc on another computer, put it on a disc/USB and then use it to install updates? Thanks in advance!

    Consider that he is therefore authorized to connect the computer to our broadband services to update the anti-anti-virus/firewall?

    Yes, as long as the firewall is turned on and that's the first thing you do online (i.e., no surfing, no audit e-mail, no chat, no download of anything else).

    The Windows Security Center will let you know if something went wrong.

    You're welcome and thank you very much for your comments!

Maybe you are looking for

  • my magic mouse suddenly stopped scrolling in pages

    While editing a long document into pages my magic mouse suddenly stopped scrolling. I have looked on various online forums and found no solution. I checked my setting and preferences, but found nothing changed. It scrolls up and down allows very well

  • When I restart my PC, why I have to go to before ESC I open a session?

    I have HP Pavilion 2011 x, Windows 7, 64 & 32 bit Desktop.When I restart to close the next day, I get the message to go to the ESC to the starter... Then, I get a lot of options before you can start up in normal mode. My HP isn't a year and it just s

  • Printer Laserjet 2600n color wrong print

    Hi all I have a Laserjet 2600n HP color printer and the problem is that, when printing, the right side of the sheet is rewrinting the upper right part of the paper (sorry if I'm not clear enough, I'm French). I have this picture to help you understan

  • Windows 7 - gel

    Original title: Rory My computer keeps freezing. Also Internet Explorer stops working. If I download Windows 10 which will clear these problems or should I buy a new computer.

  • Simple TextFilter problems.

    Hello, I'm doing a digital text on my RichTextField filter, this is my code: RichTextField = new RichTextField("",RichTextField.EDITABLE); De.setFilter (TextFilter.get (TextFilter.NUMERIC)); But I have 2 errors of the same type that say: cannot find