When I restart my PC, why I have to go to before ESC I open a session?

Similar Questions

• Flash shut when I restart my computer and I have to uninstall and reinstall every time

  Help! I worked on it for 11 hours non-stop!

  I have Windows 7 64 bit. I use the latest Firefox browser. I have install Flash and it seems sort of work. It is in my programs to uninstall from Control Panel with the Flash icon.

  When I restart my computer and go to the Adobe site, it shows that Flash does not work. It's always in Control Panel uninstall programs, BUT there is no icon. So, I have to uninstall and reinstall to use.

  When I go to all the games Zynga.com and right click on the game window the Flash window opens but when I click on settings it freezes and I right click and left click a lot so he could get out. So I can't leave the site to use 100% of Flash to run on the site. From time to time if I wait a few minutes settings will open and I put 100% but when I go back and look at home later he says: I am using 0%.

  I have Norton 360 and switched off and uninstalled and reinstalled several times, only to have the same problem occurs.

  Until I installed Windows 7 and Vista Ultimate it worked better, but still not as good as it should have.

  Also in my plugins Firefox Shockwave is there but no Flash plugin is still there with Flash installed or uninstalled. Flash is and whence came it Shockwave? Firefox?

  Do I need Shockwave for Zynga or Facebook games? Or at all for that matter. I'll install it without valid reason as long as it is not something to screw up.

  After 11 hours of this Adobe HELL I am burned! So ANY help is greatly appreciated!

  Thanks to anyone who can help me. THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  It seems that you are facing a permissions problem.  Please try to run through the steps listed in this FAQ:

  How can I fix Windows with Flash Player permission problems?

• using 30 firefox in windows 7, I get a blank when you restart, if I don't have that one tab open when I close it.

  I have my options set for firefox "open windows and tabs from last time", but whenever I don't have that one tab left open, I get a blank page. If I have several tabs, then it opens with the tab and windows.
  I am running Windows 7 Professional and Firefox 30. Thanks for any help you can offer.

  Quote: it's only when I have no tabs open I get the blank page (instead of the homepage).

  There is always at least one open tab, if it didn't is no extensions installed that hide the bar tab in this case.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My theme is always lost when I restart firefox. Why is this?

  When I put a theme on firefox whole im ok wile navigation, but when I close mozzila it changes back to default!

  OK, I managed to fix something and do not know if this has to do with anything, but I just disabled options in Adblock. is it possible because of this addon that my theme has not saved?

• IMac will stop when I restarted after I try to print a document. Before that it worked fine.

  System you want to reboot after reboot

  Hey Nolaninc,

  If you experience a problem with your iMac does not turn at all - no response when you press the power button - I would suggest that reset you the system management controller. See the steps described in this article - reset controller (SMC) system on your Mac.

  Specifically -.

  On the Mac Pro, iMac, Mac mini, and Xserve

  To reset the SMC on processor Intel Mac Pro, iMac and Mac, as well as Xserve computers mini:

  1. Shut down the computer.
  2. Unplug the power cord.
  3. Wait 15 seconds.
  4. Connect the power supply cable.
  5. Wait a few seconds, then press the power button to turn on the computer.

  If this does not solve your problem, or I did not understand what is happening, please post back with further information so that we can determine the best course of action, including-

  • Full description of symptoms.
  • Which iMac model you have?
  • What version of Mac OS is installed?
  • What is connected to the iMac?
  • Something changed internally with the iMac, like RAM.

  Thank you for using communities of Apple Support.

  Calculation of the happy.

• What should I do when I tried to log in a user's my profile has not cannot open a session. What should I do

  I am the administrator and my husband is too.  We have it so that we can have passwords.  On the computer, I worked last night and today we are unable to connect to its parameters.  "Its States, the user profile failed cannot log" I need to get the job done so I need to go fast.  We have protection on our computer.  Never had this problem.    PLEASE HELP US.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• You have enough credits or incomplete rights to open a session.

  Hello

  I am a participant of VMworld 2013. I've done a few HOL on site. I wanted to see the transcript and do some laboratories in addition to the House.

  I tried to use both my account that I created the site with password of my badge and also followed a registration link.

  Nothing seems to work. I get error "you have enough credits or incomplete rights to log in." when I try to log in.

  Thank you

  Antoni

  Hi Antoni,

  During VMworld, we run Labs in a mode that prevents access without "credits", which are issued in hotspots or in the main room of HOL.

  We intend to release this content on our public portal next month, so stay tuned! In the meantime, you will have to come to one of our sites to access the new content.

  Thank you

  Doug

• Why the data in my database disappears when I restart Tomcat?

  I have a DPL Berkeley DB database that I use for a Web application that is running under Tomcat. I can store data in the database and get it back, but when I restart Tomcat and the data have gone. In my view, that the problem is that the data is in memory, it is never written to disk, so it is not persistent across reboots. I think that this, because when I write the data to the database, the size of the files in the data files does not change.
  
  My database is not transactional, nor in writeback mode.
  
  What else could cause this problem? I'm completely stumped.

  If the environment/store is not transactional (you do not call setTransactional (true)), then the data can be sustainable only equal to 1) you call Environment.sync, 2) a control point is executed by the thread of checkpointer I background or your application, 3) you close the environment itself, that will make a control point.

  I suspect that you do not close the environment when you shut down your server.

  You can take a look at the writing transactional Applications. He described the durability more in detail.

  -mark

• I can adjust the chime that alerts me when I restart my pc.

  I can adjust the sound of the chime that alerts me when I restart my pc. I have a Mac OS X Yosemite 10.10.5 Mini late 2014.

  There is what to cut and change the volume of the ringtone to start. That's all.

  http://computers.tutsplus.com/tutorials/how-to-silence-the-startup-chime-on-a-MA c - cms-21212

  IME.htm http://Macs.about.com/OD/tipstricks/FL/Adjust-the-volume-of-your-Macs-Startup-ch

• Recently, when I restart my laptop (dell), I see this error: __Windows (rundll32) host process has stopped working__I do not have this problem since 2 months ago__

  Recently, when I restart my laptop (dell), I see this error:

  Host process Windows (rundll32) has stopped working

  I don't have this problem since 2 months ago

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, product name, file Version, company name, location
  in the registry or file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

  original title: lost document

  I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

  If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• When I restart my computer stop it crashes and I have to manually turn off

  When I restart my computer, it freezes and won't until you restart.  I have to manually turn the

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I would like to know why I have so few restore points (7) when I got the computer for many months.

  I would like to know why I have so few restore points (7) when I got the computer for many months.  My last restore point was on 07/02/13 and have a total of 3 automatic restore Points.  With my previous version of Windows XP, I used to get a calendar that shows the many restore points for the month, and at least one System Restore Point otherwise every day at all the two days.  I don't know what the problem is or how to fix.  I have 10% of my hard drive allocated to the restoration of the system, and I am running Windows 7 Home Preium Version.

  Original title: System Restore

  You only ever need a good restore point and it's just before all of your troubles start.

  XP is what it was...

  All about Windows 7 restore points...

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• Why the old tabs reappear when I restart Safari?

  How to stop the previously closed tabs reappear when I restart Safari? When I restart Safari I want only my home page to appear, but all the previously closed tabs back into the top of the page.  Please tell me how to prevent the reoccurrence of closed tabs.

  Safari-> Preferences-> general: check the first line 'Safari opens with ".

  Lex