Update of Table to another Table in another DB

Similar Questions

• Update of table column in this table corresponds with another table

  UPDATE of table column where this table corresponds to a column with another table of columns,
  Example:
  
  I need to update column in the table SIEBEL_ASSETS MATACH_FLAG = 'Yes' when less than the conditions of the
  Select a.*, SIEBEL_ASSETS a, gis_cad, c
  where upper (a.Province) = upper (c.province)
  and upper (a.TOWNSHIP_NAME_EXT) = upper (c.suburb)
  and a.Stand_ # = c.ERF_NO

  update siebel_assets a
  set    match_flag = 'yes'
  where  exists (select 1
                 from   gis_cad c
                 where  upper(a.Province) = upper(c.province)
                 and    upper(a.TOWNSHIP_NAME_EXT) = upper(c.suburb)
                 and    a.Stand_# = c.ERF_NO
                )
  ;
  

• How to update a table and insert into another

  I need to update a table and also to insert into another table and want to do it in the same form. I can it will break in 2 different forms, but it is awkward for the user. Is there a way common to this address? As a backdrop, the user is updated the status of a message (IE, changing it from open to closed) and then provide an answer. The response table is separate from the table of messages because its format is doing different.
  
  Thank you and sorry to bombard the forum today.

  .oO (davidbarrackphoto)

  > I need to update a table and also to insert into another table and want to
  > do it in the same form. I can it will break in 2 different forms, but it is
  > awkward for the user. Is there a way common to this address?

  You can do what you want in your form processing script. But for
  much more advanced than you must write your own code.

  > As a backdrop.
  > the user updates the status of a message (IE, changing it from open to closed)
  > and then provide an answer. The response table is separate from the table of messages
  > because its format is doing different.

  Just curious: what is the difference? IMHO, there should be only one table
  for messages. Can you post more details about it?

  Micha

• Update a table with one column of another

  Oracle 11g
  Hello

  i'im trying to update the two columns of table SUPPORT (SUPPORT_X, SUPPORT_Y) with two columns of table POST_HTA_BT (POSTHTABT_GPS_X, POSTHTABT_GPS_Y)

  Understand that the two tables have the colum below:

  SUPPORT (SUPPORT_ID, SUPPORT_PLAQUE, POSTHTABT_ID, SUPPORT_X, SUPPORT_Y,...)

  POST_HTA_BT (POSTHTABT_ID, POSTHTABT_GPS_X, POSTHTABT_GPS_Y,...)

  The SUPPORT_PLAQUE has type varachar. Except the keys, the other columns are varchar type in both tables.

  The point here is to update the support_x, support_y with posthtabt_gps_x and posthtabt_gps_y.But before the update we have Sheik if the fifth number of the support plate is a number of characters from "0" to "9"and the rest of the caracter of the support_plaque is '00000'

  Please note that the support_plaque is stored in the table with the form: "0025800000!"

  So I did the below script, I try to execute in sql develop.

  SET SERVEROUTPUT ON

  DECLARE
  chiffre_liste varchar (200): = '0 ', '1', '2', '3', '4', ' 5 ', ' 6' ', 7', ' 8 ', ' 9';
  CURSOR CUR_GPS_SUPPORT IS
  Select MEDIA. SUPPORT_X, SUPPORT. SUPPORT_Y, POSTE_HTA_BT. POSTHTABT_ID, SUPPORT. EXPL_ID,
  SUPPORTED. SUPPORT_PLAQUE, POSTHTABT_GPS_X, POSTHTABT_GPS_Y
  support,.
  POSTE_HTA_BT
  where
  SUPPORTED. SUPPORT_X IS NULL and
  SUPPORTED. SUPPORT_Y IS NULL and
  SUPPORTED. POSTHTABT_ID = POSTE_HTA_BT. POSTHTABT_ID and
  SUPPORTED. EXPL_ID = POSTE_HTA_BT. EXPL_ID
  Order of SUPPORT. POSTHTABT_ID;

  w_POSTHTABT_ID POSTE_HTA_BT. Type of POSTHTABT_ID %;
  w_SUPPORT_X SUPPORT. TYPE % SUPPORT_X;
  w_SUPPORT_Y SUPPORT. TYPE % SUPPORT_Y;
  w_EXPL_ID SUPPORT. TYPE % EXPL_ID;
  w_SUPPORT_PLAQUE SUPPORT. TYPE % SUPPORT_PLAQUE;
  w_POSTHTABT_GPS_X POSTE_HTA_BT. TYPE % POSTHTABT_GPS_X;
  w_POSTHTABT_GPS_Y POSTE_HTA_BT. TYPE % POSTHTABT_GPS_Y;
  

  BEGIN
  DBMS_OUTPUT. Put_line ('loading the coordoonnees GPS - GPS Coord update takes care of starting ');

  FOR HEART LOOPING CUR_GPS_SUPPORT

  w_POSTHTABT_ID: = cur. POSTHTABT_ID;
  w_SUPPORT_PLAQUE: = cur. SUPPORT_PLAQUE;
  w_SUPPORT_X: = cur. SUPPORT_X;
  w_SUPPORT_Y: = cur. SUPPORT_Y;
  w_POSTHTABT_GPS_X: = cur. POSTHTABT_GPS_X;
  w_POSTHTABT_GPS_Y: = cur. POSTHTABT_GPS_X;
  

  If substr (cur.support_plaque, 5, 1 chiffre_liste) and substr (cur.support_plaque, 6, 5) = '00000'
  w_SUPPORT_X: = CUR. POSTHTABT_GPS_X
  w_SUPPORT_Y: = CUR. POSTHTABT_GPS_Y
  END if;
  EXCEPTION WHEN NO_DATA_FOUND THEN w_SUPPORT_X: = NULL and w_SUPPORT_Y: = NULL;
  END;
  

  -Updated the table of the supports
  Update SUPPORT
  Set SUPPORT_X = w_SUPPORT_X,
  SUPPORT_Y = w_SUPPORT_Y
  where SUPPORT_PLAQUE = w_SUPPORT_PLAQUE;
  -On valid imm? immediately
  commit;
  EXCEPTION when no_data_found then null;
  -No details found
  END;
  
  END;
  /

  and I got the following errors:

  Error report:
  ORA-06550: line 2, colum 34:
  PLS-00103: symbol ',' met instead of one of the following symbols:

  * & = - + ; <>/ is mod remains not rem
  <>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
  like4 likec between | submultiset of type multiset Member
  ORA-06550: line 2, column 52:
  PLS-00103: symbol ';' met instead of one of the following symbols:

  ), * & = - + <>/ is mod remains not rem = >
  <>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
  like4 likec between | Member of multiset must
  ORA-06550: line 38, colum 48:
  PLS-00103: symbol 'CHIFFRE_LISTE' met instead of one of the following symbols:

  (
  Symbol "(" a été substitué à "CHIFFRE_LISTE" verser continuer.) "
  ORA-06550: line 39, 12 colum:
  PLS-00103: symbol 'W_SUPPORT_X' met instead of one of the following symbols:

  ), * & -+ / at rem mod < Hurst (*) > rest and or.
  multiset
  ORA-06550: line 40, 12 colum:
  PLS-00103: symbol 'W_SUPPORT_Y' met instead of one of the following symbols:

  . (), * @ % & = - + <>/ is mod remains not rem
  <>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
  like4 likec between | mult
  ORA-06550: line 41, colum 9:
  PLS-00103: symbol 'END' met instead of one of the following symbols:

  . (), * @ % & = - + <>/ is mod remains not rem
  <>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
  like4 likec between | multiset members
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:

  I checked the line number, but do not see the error in my code.

  Please could you help me?

  peace

  Hello

  glad to know that it worked. In fact, I don't see the reason to make these complicated processes.

  Remember the mantra:

  • If you can do it with SQL then do it with SQL

  Good evening!

  Alberto

• Programatically update af:table when clicking on createInsert af:button

  Hi all

  I use JDeveloper 11.1.2.4.0.

  Requirement:

  I have an af:panelCollection, inside I have a (Add) af:button and an af:table. Af: button creates an empty line in a table as createInsert. Now when I click on the Add button, it creates the empty line in the af: table. But the blank row is not visible immediately. It is visible only when I do another action in this page, as on some other tab and back.

  From my observation, I found that the updating of the table does not occur immediately.

  I want to create a blank line like createInsert done and immediately refresh the table so that the empty line is visible in the table.

  I tried to adjust the partialTrigger of the tab; the reference to the id of the af: button, but still not working.

  I tried to update the table in a pragmatic way during the click on the button, but did not work.

  Can anyone suggest me solution for this.

  Thank you and best regards,

  Susanto

  Try to update af:panelCollection and see.

• Best way to update a table with separate values

  Hi, I would really appreciate some advise:
  
  I need to regularly perform a task where I update 1 table with all the new data that has been entered in another table. I cannot perform a complete insert because this will create data duplicated each time it works, so the only way I can think of is the use of cursors in the script below:
  
  
  CREATE OR REPLACE PROCEDURE update_new_mem IS
  tmpVar NUMBER;
  
  CURSOR c_mem IS
  SELECT nom_membre, member_id
  OF gym.members;
  CREC c_mem % ROWTYPE;
  
  
  BEGIN
  OPEN c_mem.
  LOOP
  SEEK c_mem INTO crec;
  EXIT WHEN c_mem % NOTFOUND;
  BEGIN
  UPDATE gym.lifts
  Name = crec.member_name
  WHERE member_id = crec.member_id;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN NULL;
  END;
  IF SQL % NOTFOUND THEN
  BEGIN
  INSERT INTO gym.lifts
  (name, member_id)
  VALUES (crec.member_name, crec.member_id);
  END;
  END IF;
  END LOOP;
  CLOSE C_mem;
  
  END update_new_mem;
  
  
  
  This method works, but y at - it a (faster) easier way to update another table with new data only?
  
  Thank you very much

  >
  This method works, but y at - it a (faster) easier way to update another table with new data only?
  >
  Almost anything would be better than this treatment of slow-by-slow loop.

  You don't need a procedure, you should just use MERGE for this. See the examples in the section of the MERGER of the doc of the SQL language
  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9016.htm

  MERGE INTO bonuses D
     USING (SELECT employee_id, salary, department_id FROM employees
     WHERE department_id = 80) S
     ON (D.employee_id = S.employee_id)
     WHEN MATCHED THEN UPDATE SET D.bonus = D.bonus + S.salary*.01
       DELETE WHERE (S.salary > 8000)
     WHEN NOT MATCHED THEN INSERT (D.employee_id, D.bonus)
       VALUES (S.employee_id, S.salary*.01)
       WHERE (S.salary <= 8000);
  

• Update of table with 14 million records

  good day, I'm updating a table with 14 million documents column. using the data from another table.
  This takes terrible time just updated to 500,000 over the weekend, which is unacceptable.
  ideas to improve my code and get the fastest update is much appreciated.
  
  DECLARE
  TYPE vc_type is table of index varchar2 (20) by pls_integer;
  type tabtype_rowid is table of pls_integer rowid indexes;
  my_cur sys_refcursor;
  cur_limit integer: = 10000;
  
  tab_rowid tabtype_rowid;
  
  Start
  OPEN FOR My_cur
  SELECT value, rowid
  TABLE 1A
  
  where the value IS NOT NULL
  and id is null;
  
  
  loop
  collect the fetch my_cur in bulk in tab_value, cur_limit limit tab_rowid;
  
  FORALL k IN 1.tab_npi.count
  
  UPDATE table 1A
  A.ID = (select id SET
  in Table 2b
  where value = tab_value (k)
  and rownum = 1
  )
  WHERE a.rowid = tab_rowid (k);
  
  COMMIT;
  
  When the output tab_value.count < cur_limit;.
  end loop;
  
  END;
  
  
  Thank you

  903537 wrote:
  I tried to update basic training, as a first step and it crashed...

  He didn't fail, it failed.

• Update one field with another (which contains a timestamp)

  Hello
  
  I try to do what I thought, it was a simple task to update my db using the content of another, a field
  
  in my tbl_profiles I have:
  
  key | penSignedIn | lastSignedIn
  73. 2006-05-19 21:14:56.0
  
  I'm trying to update my table for the tbl_profiles.penSignedIn field is populated with the contents of tbl_profiles.lastSignedIn
  
  < cfquery datasource = "nya" >
  UPDATE tbl_profiles
  SET PenSignedIn = #rs_user.lastSignedIn #.
  WHERE profileID = 73
  < / cfquery >
  
  I get this error SEE "syntax error (missing operator) in query expression ' 2006-05-19 21:14:56.0'.»»
  
  and says CF "" SQL: UPDATE tbl_profiles SET PenSignedIn = 2006-05-19 21:14:56.0 WHERE profileID = 73 ".
  
  that looks ok to me! I have attached different formats such as
  SET PenSignedIn = {ts ' #MM_rsUser.lastSignedIn # '}
  SET PenSignedIn = #MM_rsUser.lastSignedIn #.
  SET PenSignedIn = ' #MM_rsUser.lastSignedIn # '.
  
  but none seem to not work that leads me into the wall! -can someone please point me in the right direction please
  
  Thank you so much.
  I have CF7 and database access
  
  

  If you try just to update the content of the column penSignedIn with the contents of the lastSignedIn column in the same table, follow these steps:

  
  UPDATE tbl_profiles
  SET PenSignedIn = lastSignedIn
  WHERE profileID = 73
  

  Otherwise, if you try to use the value of a variable, maybe you create a date/time object:

  
  UPDATE tbl_profiles
  SET PenSignedIn = #createodbcdatetime (rs_user.lastSignedIn) #.
  WHERE profileID = 73
  

  Phil

• Is it possible to update a query with another query?

  I'm trying to update a query with another query (see the attachment of the code). Here is my setup: I have a table in an Access database in which I enter a string in a form and an update. This string is a single record in another table in the same data source. The first table has one record to provide the second, which has many and will have more. Basically what I was asking is: is this a valid thing to do in coldfusion? If this isn't the case, please help with a method to alter. I'm still new to coldfusion.
  
  The overall effect, I'm going to do is to display a folder as a profile of truck recommended on the website: www.truckerstoystore.net. Currently, I get an error when I try to view the page with the current configuration of the query.
  
  Check out this page to see the error: www.truckerstoystore.net/currentTOW2.cfm
  
  Assistance in this matter is greatly appreciated.
  ------------------------------------------------------------------------------------------ -----------------------------------------------------------------------

  The owner of the column has a data type of character and thus the value must be in single quotes

  WHERE owner = "#Owner #

  But as your learning, I suggest using cfqueryparam

  WHERE owner =

  Ken

• call sub procedure for updating the table - need help

  Hi all
  
  I have a scneario wherein I get three values 0,2.5 and 57.
  For each value, I'll call another procedure that updates a table "sample_dest".
  The "sample_dest" table has a column "dest_nbr."
  
  Now, for each three values I get,
  I want to update only one record in the table 'sample_dest '.
  
  for example, I want to update the column "dest_nbr" with a value of 59.5 (0 + 2.5 + 57).
  
  I am unable to do this, because every time the procedure is called,
  the previous values are not stored. 57 is the last value I get,
  I am able to store only 57. But I want 59.5 to be updated in the table.
  
  How can I achieve this.
  Help, please.
  
  Concerning
  Rambeau.

  This should be done in a single sql statement, not in a loop of cursor (which is what it looks like you're doing). If sample_desc already contains records for samples, so it should look like:

  UPDATE sample_desc sdesc
  SET desc = (SELECT AVG(code) FROM sample_dest sdest
              WHERE sdesc.sample = sdest.sample)
  WHERE EXISTS (SELECT 1 FROM sample_dest sdest
                WHERE sdesc.sample = sdest.sample)
  

  If sample_desc does not already contain records (unknown from your description), then it would be an insert as:

  INSERT INTO sample_desc
  SELECT sample, AVG(code)
  FROM sample_dest sdest
  GROUP BY sample
  

  John

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• What API can be used to update the table cs_estimate_details (repair)

  I need to update the columns 'pricing_context' and 'pricing_attribute1' in the cs_estimate_details table.

  Which API can be used to update the columns. Where can I update the table directly?

  Try to use this "CS_Charge_Details_PVT" which in turn call "CS_ESTIMATE_DETAILS_PKG".

• How do I update the table in Jdev

  Hello

  I use Jdev 11.1.1.7.1.

  The control of data, I added that ADF only read the table. When I click on the button create and return to the report screen, highlight lines are added.

  Highlighted those who is not inserted into the DB table but he showed in the report. How to remove it. How can I update the table?

  

  Kindly advice me.

  Thank you

  Swathi

  That's what I got:

  -You have a table read-only, and a link to create.

  -When you press the link create a popup will be launched with a new record (may be a form in the same table iterator).

  -When you press save to save the changes validation triggers, stop you to insert the record.

  -After the fire of validation you will close the pop-up window (by pressing icon or by pressing Cancel).

  -After closure of the pop-up window, you will find that reading one table has some blank lines.

  If it is your problem if you have 2 choices:

  1. in the AppModule you can make a new instance on the view object (to which redirect the table) If your view object called 'EmployeesView', so, in AppModule, you should have EmployeeView1 and EmployeeView2 and your table may point to EmployeeView1, and when you create new line create in EmployeeView2 and after completing the creation you can run the query and then refresh the table (as shown in the following code).

  2 - the second option in the popup cancelListener link at the rear bean method then you can update the table by program as:

      DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("TableIteratorName"); // from pageDef.
      iter.getViewObject().executeQuery();
      RequestContext.getCurrentInstance().addPartialTarget(getTableComponent());// from table Binding property bind it to object in back bean
  

• Update the Table of Adf

  Hi all

  I have a page jspx, with a table and a button.

  Create the table data control, and it contains 4 columns

  (Name, card student, asked (Question or answer)).

  I create the code for the button to work

  1. Select a record

  2 send email

  3. when I send the request goes from Q to A

  All work fine. The mail has been sent. The demand for DB password Q has. But in my jspx table refreshes.

  Until I close and open again, it displays all the data.

  How cal I solve it?

  Thanks in advance

  Christos.

  Simply add partialTrigger on table pointing to the button.

  It will update the table when the button is clicked.

• Update a table using the clause

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  
  

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Krishna Devi wrote:

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Thanks for posting creates table and test data.

  The error message would have helped because it's pretty obvious that this is the problem:

  Update table empsalary

  *

  ERROR on line 1:

  ORA-00903: invalid table name

  Just remove the word "table".

• You need to update a Table on a regular basis. Incremental update on only records updated in the Source table

  Dear all,

  I have a requirement to extract the full details of human resources and payroll related applications Oracle HRMS tables.

  You will need to create a table with these values for a specific nationality.

  Post Table design, I have to periodically update this table, in that based on changes made to the Tables of basic Oracle.

  Ex: A Table like Structure:

  PERSON_ID	NUMBER
  EMPLOYEE_TYPE	VARCHAR2(80)
  BUSINESS_GROUP_ID	NUMBER
  BUSINESS_GROUP_NAME	VARCHAR2 (240)
  STAFFNR	VARCHAR2 (30)
  STAFF_NAME_EN	VARCHAR2 (240)
  STAFF_NAME_AR	VARCHAR2 (240)
  SHORT_NAME	VARCHAR2 (150)
  FIRST NAME	VARCHAR2 (150)
  LAST_NAME	VARCHAR2 (150)
  MIDDLE_INITIALS	VARCHAR2(60)
  ASSIGNMENT_ID	NUMBER
  TITLE	VARCHAR2 (30)
  CATEGORY	VARCHAR2 (30)
  MARITAL_STATUS	VARCHAR2 (30)
  Date of birth	DATE
  DOJ_COMPANY	DATE

  This detail table is extracted from Oracle HRMS tabels like Per_all_people_F and Per_all_assignments_F etc. Not whenever a record is updated to say the employee's first name, I'll have to update this particular record for the employee. I am well aware of Materialized view feature. But I needed a faster solution, in PLSQL.

  I'm on a tight schedule. So any help is appreciated.

  Best regards
  Antony Jayaraj J

  Looks like you want to Merge.  There's even an associate HR example!