Update ROLLUP for totals

Hi guys.

I tried to summarize a bunch of lines, but I got a bit doing wrong.

I have a few nested queries that I show below:

SELECT DATA, SAP, SADIG, DIFF
  FROM (SELECT TMPSAP.DATSAP as DATA,
               TMPSAP.VALSAP as SAP,
               TMPSADIG.VALSADIG as SADIG,
               ABS(TMPSAP.VALSAP - TMPSADIG.VALSADIG) as DIFF,
               GROUPING(TMPSAP.DATSAP) AS GRUPO
          FROM (SELECT SUM(ZVLBRT) + SUM(ZDESVP) as VALSAP,
                       TO_DATE(SPTAG, 'YYYYMMDD') as DATSAP
                  FROM SAPR3.S974@PRD
                 WHERE VKORG = '1000'
                   AND (TO_NUMBER(SPART) BETWEEN 10 AND 55 OR SPART = '99')
                   AND KUNNR <> 1004
                   AND TO_DATE(SPTAG, 'YYYYMMDD') BETWEEN
                       TRUNC(TRUNC(SYSDATE, 'DD') - 1, 'MM') AND
                       TRUNC(SYSDATE, 'DD') - 1
                 GROUP BY SPTAG) TMPSAP,
              
               (SELECT SUM(FATDEVVLR) as VALSADIG, DATFATDEV as DATSADIG
                  FROM SADIG_FATDEV
                 WHERE BUCDG = 01
                   AND DATFATDEV BETWEEN
                       TRUNC(TRUNC(SYSDATE, 'DD') - 1, 'MM') AND
                       TRUNC(SYSDATE, 'DD') - 1
                 GROUP BY DATFATDEV) TMPSADIG
         WHERE TRUNC(TMPSAP.DATSAP, 'DD') = TRUNC(TMPSADIG.DATSADIG, 'DD')
         GROUP BY GROUPING SETS((DATSAP, VALSAP, VALSADIG),())) ALLDATA
 GROUP BY ROLLUP(ALLDATA.GRUPO, ALLDATA.DATA, SAP, SADIG, DIFF)

I will have some difficulties to determine which GROUP BY attributes should I use for the outter request, so the results I get are like these:

DATASAPSADIGDIFF
08/01/2013100020001000
08/01/201310002000
08/01/20131000
08/01/2013
08/02/2013100010000
08/02/201310001000
08/02/20131000
08/02/2013
08/03/2013200030001000
08/03/201320003000
08/03/20132000
08/03/2013
08/05/2013500050000
08/05/201350005000
08/05/20135000
08/05/2013
08/06/2013100020001000
08/06/201310002000
08/06/20131000
08/06/2013

If you look at my second selection layer (the one that returns ALLDATA), my results are like these:

DATASAPSADIGDIFFGRUPO
08/01/20131000200010000
08/02/20131000100000
08/03/20132000300010000
08/05/20135000500000
08/06/20131000200010000
1

And what I want is this:

DATASAPSADIGDIFF
08/01/2013100020001000
08/02/2013100010000
08/03/2013200030001000
08/05/2013500050000
08/06/2013100020001000
10000130003000

I tried several combinations in the rollup PACKAGE, but without success. What Miss me?

Thank you very much!

Best regards

Vinicius

WITH just STEP_3 simulates the result of your step_3. For brevity, I've coded dates as strings.

Use only the part colored on my previous post.

Concerning

Etbin

better yet

with

STEP_3 as

(select to_date (' 01/08/2013 ',' dd/mm/yyyy') DATA, SAP 300, SADIG 100, 200 DIFF 0 GRUPO of union double all the)

Select to_date (February 8, 2013 ', ' dd/mm/yyyy'), 1000,1000,0, 0 of all the double union

Select to_date (March 8, 2013 ',' dd/mm/yyyy ""), - 500,-500, 0, 0 of all the double union

Select to_date (May 8, 2013 ', ' dd/mm/yyyy'), 5000,5000,0, 0 of all the double union

Select to_date (June 8, 2013 ', ' dd/mm/yyyy'), 1200,1200,0, 0 of all the double union

Select to_date (July 8, 2013 ', ' dd/mm/yyyy'), 1800,1800,0, the double 0

)

Select decode data (grouping (data), 0, to_char(data,'dd/mm/yyyy'),'Total:');

Sum (SAP) sap,

Jeremy Sum (Sadig),

Sum (diff) diff

of step_3

Group of rollup (data)

Post edited by: Etbin used dates

Tags: Database

Similar Questions

  • Not able to install Windows XP media center 2005, het a message to install the Update Rollup 2.

    Original title: how to install the Update Rollup 2

    I recently bought a kindle fire hd but when I connect it to my computer with the usb connection, it shows not only a connected device on my computer.amazon tried to install windows xp media center edition 2005 (kb900325) .but it would not install it came a message saying I need to install cumulative update 2 first.î tried, but does not Please help

    Hi James,

    Welcome to Microsoft Community where you can find all the answers related to Windows.

    According to the description, it looks that you are not able to install Windows XP Media Center.

    I have a couple of steps that should help you to solve this problem.

    Follow these 4 steps to install the KB925766 correctly:

    a. if the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

    To determine whether the 886904 update is installed, follow these steps:

    i. click on start, run, type appwiz.cpl, and then click OK.

    II. Click to select the show updates check box.
    III. in the list currently installed programs, locate the following item:

    Fix for Microsoft .NET Framework 1.1 (KB886904)

    If you see this option, you must remove the hotfix. To remove the patch, click on the Microsoft .NET Framework 1.1 (KB886904) Hotfix and then click on remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

    b. to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed. Windows Update detects whether these packages are installed. Windows Update automatically installs these packages for you.

    (i) follow the link below to download the .net framework 1.1 manually:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

    (ii) follow the link below to download the .net framework 1.1 SP1 manually:
    http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

    c. cumulative update 2 for the Windows XP Edition Media Center 2005 (KB900325)
    Follow the link below to download and install the KB900325:
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e5daf37e-E243-4410-BC51-81cf2b56fe6e

    d.October 2006 Update Rollup for Windows XP Media Center Edition 2005 (KB925766)
    Follow the link below to download and install the KB925766:
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8a2e5868-c2b9-4131-b08e-afc7cb0a6576

    Now try to install this update and let us know if it solved the problem.

    For additional help, refer to the article below:
    http://support.Microsoft.com/kb/925766

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • MS11-057: a security update Cumulative for Internet Explorer 7 for Windows XP (KB2559049) + software updates fails SCCM

    Morning Microsoft,.

    I am facing a problem in my office environment (Windows XP SP3, Internet Explorer 7, software Trusteer report is NOT installed). We are trying to deploy a package to update all the post-SP3 XP critical and security patches and have problems with the update above.

    We use the SCCM synchronized with our server WSUS software update to deploy updates and it works very well in most parts.

    However this particular update appears to install (that is listed in Add/Remove Programs) However whenever the client checks for updates Windows he sees this as available, download, try to install it and indicates that a reboot is required... After a reboot, he's stuck in this cycle, each time that the client checks a Scan software deployment.

    It was on our test PC at the moment we have so removed from our upcoming updates and aboard. Everyone knows this and they can advise?

    Here are some excerpts from a newspaper of the customers on the update of the files

    WUAHandler.log (ignore the stop bits listed here update that installs very well)

    Async completed research.    WUAHandler 29/08/2011 09:55:58 6128 (0x17F0)
    Successfully completed the scan.    WUAHandler 29/08/2011 09:55:58 1788 (0x06FC)
    Go to search using the WSUS update source.    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous looking for all the updates started...    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous successfully looking for updates.    WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update: 5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: dfec6275 - 7 d 47-4da6-bcee-d4f20e57acee, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update: 5f08af04-7832-452f-9206-4289ed36f1b4, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: a9278996 - 22 c 7-4f60-9bd3-540d291c4bfd, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB980182) (5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update (Missing): update rollup for the ActiveX for Windows XP (KB2562937) stop bits (5f08af04-7832-452f-9206-4289ed36f1b4, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Async updates installation has begun.    WUAHandler 29/08/2011 10:06:10 6032 (0 x 1790)
    Update 1 (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) completed the installation (0x00000000), reboot needed? Yes WUAHandler 29/08/2011-10:06:34 6060 (0x17AC)
    Update 2 (5f08af04-7832-452f-9206-4289ed36f1b4) completed the installation (0x00000000), reboot needed? No WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Async completed installation.    WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Installation of updates is complete.    WUAHandler 29/08/2011 10:06:43 3184 (0x0C70)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:06:43 6032 (0 x 1790)
    Async completed research.    WUAHandler 29/08/2011 10:07:51 5740 (0x166C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:07:51 4644 (0 x 1224)
    Update (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) has completed the restart of the post operation. HResult: 0 x 00000000.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async completed research.    WUAHandler 29/08/2011 10:40:29 3628 (0x0E2C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:40:30 5636 (0 x 1604)
    Go to search using the WSUS update source.    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous research began using the filter: "UpdateID ="7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe"AND DeploymentAction = *'...»    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous successfully looking for updates.    WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update: 7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102 BundledUpdates: 1 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Update: a7c0649d-f81c - 40 c 1-b247-b4e6bb990c8a, 101 BundledUpdates: 0 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB2559049) (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102) WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Async updates installation has begun.    WUAHandler 30/08/2011 09:27:15 3848 (0x0F08)
    Update 1 (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe) completed the installation (0x00000000), reboot needed? Yes WUAHandler 30/08/2011 09:27:39 1656 (0 x 0678)
    Async completed installation.    WUAHandler 30/08/2011 09:27:39 5840 (0x16D0)
    Installation of updates is complete.    WUAHandler 30/08/2011 09:27:39 3848 (0x0F08)

    It is a forum for specific consumers. You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

    =======================

    You can encounter errors related to connect temporary [p. ex. 0x80072EFF; 0x80072EFE;] 0x80072EFD; 0x80072eef; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0X8024402F; 0x800705B4] when you use Windows Update or Microsoft Update [but not necessarily WSUS! ]  to install the updates
    http://support.Microsoft.com/kb/836941

  • Update rollup of convenience

    I can't find a list with updates included in update rollup of convenience. Where can I find it?

    Hello

    To obtain the update rollup for convenience, you can view the steps here posted by Aakkam22. For your information, you can get the package for this update to the Microsoft Update Catalog Web site.

    Let us know how it goes.

  • E10: Update Rollup 1 for eHome Infrared Receiver for Win XP MCE 2005

    Hey all, yet another question.

    I'm on Qosmio E10 with MCE 2004.
    When I go to "Windows Update" I see something called "Update Rollup 1 for eHome Infrared Receiver for Windows XP Media Center 2005" (KB888795) Edition "»
    It is optional and install it I has yet because I'm not sure if I'm supposed to install at all since I'm on MCE 2004.

    I read another thread on this forum saying that this update completely screwed the infrared receiver on some configurations.

    So, question: Toshiba recommends installing this update for MCE 2005 on an MCE 2004 installation?

    (I was surprised that it appears in Windows Update despite my MCE 2004..., perhaps a bug of Microsoft?)
    Later,.

    Alcahest

    Hello

    My opinion is: don t touch a system running unless you are talking about an update to security... but MS recommends the update, so you can do the update, but it is at your own risk... as far as I know, Toshiba do support the software they offer with unit... not necessarily MS Update.
    In this case, you can try to run the update. If something goes wrong, you can roll back the OS with Restore tool.

    Good bye

  • Can not download the update rollup 7 for System Center R2 2012 - Data Protection Manager (KB3065246)

    Microsoft has released a patch missed for DPM in July that breaks the ability of DPM to remove older restore points. My server is invaded by the recovery points and I would like to address them. Failed to remove the bad fix, update rollup 7 for SC DPM, in Add/Remove programs. The new version of the patch does not appear in Windows Update, probably because she sees that the wrong version is here.

    The only place where I can find to download the update rollup 7 fixed is here:

    http://catalog.update.Microsoft.com/v7/site/search.aspx?q=3065246

    The download site does not at all on Microsoft Edge, Chrome or Firefox. On I.E. I can see the "basket" link, but it still errors out before presenting a download.

    By clicking on 'help' on this page provides a link to send a mail to * address email is removed from the privacy * which gives a failure of discount if nondelivery report send you it.

    By clicking 'Send a problem' report also channels to the community, not a problem of any kind report form.

    So, I'm here. Ask a question about a product in Windows Server, Windows Server is not not a choice of versions of Windows in the form below.

    If anyone from Microsoft is reading, correct the download site or give me another way to download it, thanks.

    Turn on "Compatibility view" for microsoft.com allowed the download button to appear and I was able to get the file. Looks like a clear indication that this site is updated you need to demote your browsing session to get even to function.

  • UPDATE ROLLUP 1 FOR WINDOWS 2000 (KB891861

    When I download and install an update (Update Rollup 1 for Windows 2000 Service Pack 4 (KB891861), my computer won't reboot (reboot), it keeps restart and windows will not start.) Help?

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General

    Above is the link to the General Windows 2000 discussion group.

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.windows_update&cat=en_us_59ae21ed-54d8-490d-8BF3-8741cee780a4&lang=en&CR=us

    And the group discussion Windows 2000 update.

    Here is the Vista Forums.

    See you soon. Mick Murphy - Microsoft partner

  • Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

    I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
    When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
    When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
    With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
    http://support.Microsoft.com/kb/910905
    However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
    I took a copy of the mcelog and have attached a copy of the log below.

    Assistance or management, you can provide me to solve this problem would be highly appreciated.

    At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

    A generic Package: 10/28/10. 21:32:48
    Looking for an existing installation of the generic package

    A generic Package: 10/28/10. 21:32:48
    Looking for an existing installation of the generic package
    Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1045.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1046.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package

    Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1047.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1043.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1043.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1043.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1043.

    A generic Package: 10/28/10. 21:33:02
    Looking for an existing installation of the generic package
    Creation process: KB900325.exe/quiet /norestart
    0x00000bc2 returned by process

    Function (ExecCmdInThread) Message of Post for the Package id: 1048.

    "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
    Process returned 0 x 00000000

    Function (ExecCmdInThread) Message of Post for the Package id: 1044.

    A generic Package: 05/12/11. 21:26:14
    Looking for an existing installation of the generic package

    A generic Package: 05/12/11. 21:26:53
    Looking for an existing installation of the generic package
    Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000643

    Function (ExecCmdInThread) Message of Post for the Package id: 1045.

    A generic Package: 06/03/12. 21:27:50
    Looking for an existing installation of the generic package

    A generic Package: 06/03/12. 21:28:23
    Looking for an existing installation of the generic package
    Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000643

    Function (ExecCmdInThread) Message of Post for the Package id: 1045.

    A generic Package: 12/02/13. 09:44:39
    Looking for an existing installation of the generic package

    A generic Package: 12/02/13. 09:45:16
    Looking for an existing installation of the generic package
    Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000643

    Function (ExecCmdInThread) Message of Post for the Package id: 1045.

    A generic Package: 12/02/13. 10:11:58
    Looking for an existing installation of the generic package

    A generic Package: 12/02/13. 10:12:30
    Looking for an existing installation of the generic package
    Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
    Process returned 0 x 00000643

    Function (ExecCmdInThread) Message of Post for the Package id: 1045.

    Hi kwanray,

    Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

    I'll help you with this problem. I suggest you follow the steps in the article.

    Update Rollup 2 for Windows XP Media Center Edition 2005

    Reference: Support for Windows XP Media Center Edition 2005

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.

    Hello

    All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.

    And even if I did not restore the system off, there is no restore point on my machine.

    So I'm always searching in google and microsoft.com but a little lost right now.

    Moccan,
    Thanks for posting on the Microsoft answers Forum.  I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325.  In particular the section more information, which has this:

    If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

    To determine whether the 886904 update is installed, follow these steps:

    1. Click Start, click run, type appwiz.cpl, and then click OK.
    2. Click to select the Show updates check box.
    3. In the currently installed programs list, look for the following element:
      Fix for Microsoft .NET Framework 1.1 (KB886904)

    If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

    If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

    I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

    Do yourself a favor and remove the application.  Mac do not need AV applications and at best, they will be not hard (but not good either) and at worst will corrupt your system / OSX's built in protection.  Your concerns are malicious software that requires the cooperation of the user to install, not the virus.

    For more information, please read this:

    http://www.thesafemac.com/

    Ciao.

  • Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898) cannot install it keeps trying to update and re - install every time that I reboot

    The following two updates were NOT able to install, I tried FIX and other methods.  I turned off the PC, install, but every time I start up again, he re - install the bottom to update files and does not install? I tried this at least 10 times without success. But I get the yellow shield at each time of installation.

    Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898)

     

      

    Update security for Windows XP (KB2481109)

    See the section "How to get help", for example, http://support.microsoft.com/kb/2502898

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  • What the correct update BIOS for my Lenovo R61?

    Main question:

    I have a Lenovo R61 15.4 "laptop computer screen with IEEE. 1394  What is the good BIOS update version for my system?

    * The version on the Web the matrix file BIOS Lenovo page, 7KET72WW (1.22 - 1, 06), seems wrong and outdated compared to this page:

    http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us

    which indicates that it should be 7OETC1WW (2.21). **

    Background:

    This Lenovo R61 laptop has always been slow and difficult, with performance much worse than my old XP system with worst record.  Originally, I tried to reinstall Vista to remove the useless factory software I thought may be responsible for slowing down the system.  This was the beginning of many problems.  I had added a stick of 1 GB 2 brand new RAM for the system, and I couldn't properly reinstall Vista with the ThinkVantage tools.  When I contacted the support, they told me it was due to the system are different from the original specifications (additional RAM).  It's ridiculous, but also to correct.  In addition, my Windows key at the bottom of the laptop sticker was scratched and unreadable, directly from the factory.  Support told me that the key is not useful or necessary because the only way to reinstall Vista is using the ThinkVantage tools.  Once again, ridiculous, but after removing my extra RAM, I was able to reinstall Vista.  This did not help the performance, even with the additional software deleted.

    On the current problem:

    I have experience several daily BSOD. Analysis of accident of Vista generally points to the USB driver, sometimes the network adapter driver and often does not return anything.

    I want to update my BIOS, but I don't know which version to use.  According to the information of the system, my system model is 8932CTO. The current system BIOS is the 7OET24WW version (1.03).  I did a search on Google for this BIOS and found the following cached page:

    [ http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us] It lists the following:

    This version supports the following systems:
    -ThinkPad R61 - 15.4-inch wide screen models
    Machine types: 8930 8933, 8934, 8935, 8936, 8937
    -ThinkPad R61i - model widescreen 15.4 inches with IEEE 1394
    Computer type: 8932

    The latest BIOS for my system model number is indicated as:

    Version:     2.21-1.08Release Date:     2008/09/16File link             File size             File description7ouj13us.exe             2,728,120             BIOS Update Utility

The BIOS history is shown as:Utility version  BIOS version    Previous release  Embedded Controller version2.21-1.08        7OETC1WW (2.21) Current release   7KHT24WW (1.08)2.20-1.08        7OETC0WW (2.20) 7ouj12us          7KHT24WW (1.08)2.18-1.08        7OETB8WW (2.18) 7ouj10us          7KHT24WW (1.08)2.16-1.08        7OETB6WW (2.16) 7ouj09us          7KHT24WW (1.08)2.15-1.08        7OETB5WW (2.15) 7ouj08us          7KHT24WW (1.08)2.14-1.08        7OETB4WW (2.14) 7ouj07us          7KHT24WW (1.08)2.10-1.08        7OETB0WW (2.10) 7ouj05us          7KHT24WW (1.08)2.09-1.08        7OETA9WW (2.09) 7ouj04us          7KHT24WW (1.08)2.07-1.08        7OETA7WW (2.07) 7ouj03us          7KHT24WW (1.08)1.07-1.08        7OET28WW (1.07) 7ouj02us          7KHT24WW (1.08)1.03-1.06        7OET24WW (1.03) 7ouj01us          7KHT22WW (1.06)

    The first version of this list, 7OET24WW (1.03) matches the BIOS on my system, which indicates that I have to upgrade to the current version, 7OETC1WW (2.21).

    This page shows that my system model supports IEEE 1394 (Firewire), and of course, the Device Manager shows a RICOH OHCI Compliant IEEE 1394 Host Controller, even if my laptop is not a firewire port!  Then...

    QUESTION: why does my laptop have an IEEE 1394 controller, but no port?  It is used to something else? Safely disable the controller driver if it is pointless?

    The same page also lists the history of BIOS for thise models, and the current BIOS version does not match the name on the matrix of the file BIOS Lenovo - ThinkPad page here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=BMOE-3VAM8Y#r

    BIOS version          BIOS release date  Embedded controller version  Embedded controller release date
R61 14.1 inch widescreen with IEEE 1394
7LET52WW (1.22-1.06)  19 Sep 2007        Included in the BIOS Update Utility

R61 14.1inch and 15.4inch widescreen without IEEE 1394
7KET72WW (1.22-1.06)  28 Aug 2007        Included in the BIOS Update Utility

R61 15 inch
7QET25WW (1.07)       09 Sep 2007        Included in the BIOS Update Utility

R61 14.1inch and 15.4inch widescreen without IEEE 1394
7KET72WW (1.22-1.06)   28 Aug 2007       Included in the BIOS Update Utility

    My computer is a R61 widescreen 15.4 inches with IEEE 1394 (at least the controller).  NONE OF THESE VERSIONS OF BIOS MATCHES THE OTHER PAGE, I FOUND, WHICH SEEMS MORE ACCURATE!  Also, only one of the many, many BIOS versions presented on this page are from 2008.  So the page of the Lenovo BIOS file matrix totally out of date or what?

    What version of BIOS should I use to upgrade my system, and what else can I diagnose these BSOD and performance problems?

    Agotthelf is correct; 2.21 is the latest version of the BIOS, and to install it, you must burn it to a CD as an ISO file. I was too lazy to do.

    My R61, too, is the 15.4-inch (1680 x 1050) model, but unlike you, I have XP Professional and a 1394 a miniport. The reason your system shows Firewire, it's Ricoh Board which controls the 4 - 1 or 5-in-1 memory card reader includes the R61 Firewire controller. I guess it's convenient is you decide, as I do, to add a CardBus (or, as the case may be, an ExpressCard) with full major ports 1394 a(1) FireWire, 1394b (FireWire 2), or both.

  • How to find the level of update rollup

    Hello

    I would like to know the current level of update rollup applied for all SCM modules and finance, listed below.

    We are in * 12.1.3 with 11.2.0.3 database on Linux 5 *.

    Supply chain
    1 oracle I have procurement (ICX)
    2 buy a (IN.)
    3 sourcing (PON)
    4. the inventory (NAV) (Note: WMS not installed)
    5 order Management (Ontario)
    6 Shipment Execution (WSH)
    7. cost Management (CST)

    Finance
    1. Accounts Payable (SQLAP)
    2. receivables (AR)
    3. cash Management (CE)
    4 Assets (OFA)
    5 general Ledger (SQLGL)
    6 subledger Accounting (XLA)


    Please help me how can I find the required information, waiting for your answer.


    Thank you

    user11969666 wrote:
    Hello

    I would like to know the current level of update rollup applied for all SCM modules and finance, listed below.

    We are in * 12.1.3 with 11.2.0.3 database on Linux 5 *.

    Supply chain
    1 oracle I have procurement (ICX)

    9249326 R12. ICX. B.3 ICX

    2 buy a (IN.)

    9249328 R12. In. in. B.3

    3 sourcing (PON)

    9249327 R12. PON. B.3 SOP

    4. the inventory (NAV) (Note: WMS not installed)

    9242191 R12. B.3 INV INV.

    5 order Management (Ontario)

    9244129 R12. B.3 ONTARIO HAVE

    6 Shipment Execution (WSH)

    9244435 R12. WSH. B.3 wsh

    7. cost Management (CST)

    If his oracle landed cost management
    9244459 R12. INL. B.3
    Please confirm its INL or CSE?

    >

    Finance
    1. Accounts Payable (SQLAP)

    9244867 R12. BPM B.3

    2. receivables (AR)

    AR ar 14689993 B R12.ar.B.3

    3. cash Management (CE)

    13024047 what this R12.ce.B.3 B

    4 Assets (OFA)

    9244841 R12.FA. B.3 fa

    5 general Ledger (SQLGL)

    9244874 R12.GL. B.3 gl

    6 subledger Accounting (XLA)

    9244854 R12. XLA. B.3 xla

    Please confirm each of them by running the following query
    Select patch_level in the fnd_product_installations where patch_level like '% ICX % ';

    like wise

    ;) AppsMAsti ;)
    sharing is caring

  • Approvals of auto Service does not work after the Update Rollup 2.3 HRMS on Oracle11i

    Custom approval workflow for self-service has stopped working and is auto approving after HRMS update rollup 2 and 2 on Oracle 11i. Can someone advice on what may be the cause of this problem.

    Hello

    You have customized by changes in oracle seeded workflows and not to change his name. If Yes, then it is not supported patches way and oracle are quite capacble of replace your coustomization.

    Oracle provides a way for the customization, serach metalink support and find out how to do it.

    You can get the list of object crushed by the patch by OAM or by running the fix in test mode.

    If you have backup of these workflows, you can replace it.

    Thank you
    JD

  • Can I update OS for iMac (early 2008)?

    Can I update OS for iMac (early 2008)?

    The OS is currently 10.9.5. I want to upgrade the operating system to something a bit more recent. It cannot be upgraded to Sierra.
    Can I go to Yosemite or El Capitan etc.? If so, how?

    Click here and download El Capitan.

    (145120)

Maybe you are looking for