Update the task details in the customer web vCenter

Similar Questions

• Big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

  So we're all aware of the issues with vCenter 5.5U1 WebClient and how we are forced to use it to make use of all the features of the v10, vDS 5.5 vHardware (config switch changes the synchronization problems if an emergency change is done on c# client vDS) VSAN only available via the web client, flash, sluggish to questions do not respond the questions and the list goes with the presentation of the menus and hard to navigate, issues SSO (always after 5.5 upgrades)

  So @ VMware vCenter Architecture Team is going to make an effort to hear and give due to the much needed performance improvements and improvements to the user interface before adding more features and SSO type services which majority of clients don't use not and not force it's customers continue to loose faith its vCenter product?

  Looking for answers with options to remove vCenter 5.5 U1c installation as well as a promise to answer to these in vCenter 6.0 version!

  Here is your answer. First of all, to use Chrome as your browser, then you need to go with at least 4vCPU * 32 GB of RAM & adjust the segment size of java for SSO, Tomcat, (TC) Management Server, inventory server and profile based storage to "refine" vCenter device with DB Oracle embedded or external memory. I did, and performance gains went 10 X. This includes the vSAN enabled running clusters. My recommendation that works very well based on design documents:

  vCenter Server inventory	VMware VirtualCenter Management Webservices (tc Server)	The inventory service	(Sps) profile-based storage service
  Large (more than 400 guests or 4000 VMS) stock	4 GB	12 GB	4 GB

  Setting on the vCenter server 5.5 of the memory unit

  • Connect the unit to vCenter server using SSH
  • VI /usr/lib/vmware-vsphere-client/server/wrapper/conf/wrapper.conf configuration file, locate the JVM memory section and change maxmemory to 4096

  Line 66

  # Memory #wrapper.java.initmemory = 512wrapper.java.maxmemory = 4096 JVM

  • /usr/lib/vmware-vpx/inventoryservice/wrapper/conf/wrapper.conf VI configuration file, find the setting. MaxMemory and replace it with 12288

  Line 116

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 12288

  • VI /usr/lib/vmware-vpx/sps/wrapper/conf/wrapper.conf find the setting. MaxMemory and change from 1024 to 4096

  On line 154

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 4096

  • Restart the vCenter device w / DB (1000 hosts) external /embedded for lab (100 guests)

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2005086&sliceId=1&docTypeID=DT_KB_1_1&dialogID=294472825&StateID=1%200%20294492358

  Documentation Centre of vSphere 5.5

  PS: vCenter 6.0 has much better performance based on my beta test... so don't lose hope yet. Many improvements to come...

  PS: I've also broken down on this here until I figured this out just recently: Re: big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

• How can I update the custom object data card?

  Hello world

  We maintain a field check box on one of our custom objects data sheets.  I took a quick glance at the Eloqua REST API of Fred Sakr and found c# library class "customobjectdata", but there are only methods to get data cards and create new maps.  Someone at - it an example of updating an existing data card?

  I also took a glance to the bulk API but this would bring additional complexity to our development effort.  It seems that there must be a way to do this with a single call.

  I am open to the use of the SOAP API if this action is not possible using REST.

  Thank you

  Hey Austin Christmas Yes, you can update CDO via the REST API. We found this material useful for the performance of the access/mutation operations for CDOS: REST API - the custom metadata object

• PHP and the display of the custom Web pages

  Hi all

  I want to execute some PHP code on my display of custom web pages, but I don't know how to install it. The problem is that I don't know even what web server use Orchestrator. I thought it was Apache but I can't find the corresponding files. Could someone help me to implement this feature?

  Thank you.

  Hello!

  seems to be a problem in the tapestry-Parser.

  This should work if you use an external file for the javascript stuff:

  
  
  
  
  

  
  

  And all javascript code in voodo.js in the same directory.

  Kind regards

  Joerg

• Try to update the current Web site and I get this error message

  I can't update my dute site to "An FTP error" when connecting to the server. See attachment below. I have another site and I have day yesterday without problem.

  I use: Windows 7, IE 11, Avast Antivirus, DW CS6, Go Daddy is my host.

  Thank you, Mariola

  

  Check your FTP credentials.

  Lost random access with GoDaddy in the past. They have "updated" the server and lost your credentials in the process.

  You can also activate or use the FTP Passive mode and performance optimization in your FTP site settings.

  Also check that you are using the folder root correct server. I think GD still use / public for this. It's been a while since I've dealt with them.

  If none of these things make the case, we will need to take a look "under the hood" so to speak. Post a screenshot of your FTP (change any sensitive information) can help.

• How to include Web only in the custom web viewer

  Hi, I have published "renditions" folio iPad being incorporated in a web viewer customized on the website of the company. I created a Web rendering only in order that it appears in the web viewer custom, but rendering of the iPad, it's what always incorporates. It seems that the Web don't watch on the Adobe viewer welcomed Web, not the company site. Is there a different URL to the Web only folio I should use? Where can I find that? Thank you.

  Hi, have confirmed the account where you created a web only rendering has the URL hosting on the Administration page accounts? I wonder if he this interpretation was created using a separate account. In case you haven't seen the devnet article on the web viewer configuring integrated, it's here.

  I'll you private message for more information.

  Thank you

  Brian

• CF can do the custom Web Service headers?

  I try a web service created in .NET, which seems to use a custom for authentication header object to the consumer. I'm banging my head against the wall trying to figure out how to configure the WS invoke CF so that it creates the correct SOAP.
  
  Normally, I try and create a CF Structure and place it in the web service call.
  for example:
  
  objWS = CreateObject ("WebService", " http://www.somesite.com/webservices/myMethod.asmx?WSDL");
  
  myAuthHeader = {username = "User1" password = "auditUser1"};
  
  addSOAPRequestHeader (obj, " http://www.somesite.com/webservices/", "AuthenticationHeader", myAuthHeader);
  
  
  But it gives me the following output:
  
  < soapenv:Header >
  "" "< soapenv:mustUnderstand ="true"soapenv:role = ns1:AuthenticationHeader" http://schemas.xmlsoap.org/soap/actor/next " xmlns:ns1 =" http://www.somesite.com/webservices/ "> "
  "< xmlns:ns2 point =" http://xml.apache.org/xml-soap "> "
  < key xsi: type = "xsd: String" > USER name < / key >
  < value xsi: type = "xsd: String" > user1 < / value >
  < / point >
  < item >
  < key xsi: type = "xsd: String" > PASSWORD < / key >
  < value xsi: type = "xsd: String" > pass1 < / value >
  < / point >
  < / ns1:AuthenticationHeader >
  < / soapenv:Header >
  
  Instead of:
  
  < soap: Header >
  "< AuthenticationHeader xmlns =" http://www.somesite.com/webservices/ "> "
  User1 < user name > < / username >
  pass1 < password > < / password >
  < / AuthenticationHeader >
  < / soap: Header >
  
  Does anyone have an idea on what I'm doing wrong?
  
  Thank you!

  Don't you know - after research / tried for hours trying to understand, I came across the solution about 10 minutes after the announcement. For anyone interested, the answer can be found here:

  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=webservices_24.html

  The secret - create your custom as string XML, parsed into an object and then pass it to your Web service using the addSOAPRequestHeader function:

  
  http://www.somesite.com/webservices/">
  User1
  pass1
  
  
  

  ...

  addSOAPRequestHeader (objWS, " http://www.somesite.com/webservices/", "AuthenticationHeader", xmlObj);

• Update the existing Web page

  I've loaded my Web page and want to make changes. I made the changes in my local folder, then selected in the menu of the Site - synchronize. I synchronize the entire site and put the newer files on the server and it seems to go through all the steps. However, when I check the site online, some updates are successful and others are not. I'll make changes regularly on this site. What should I do? So I'm back to the present, any help is appreciated!

  Whenever you makes changes to a page simply use

  Ctrl Shift U

  Is to download the page and if you choose to download dependent files, it will also take care of anyfile that must be downloaded to make it work.

• AIP - SSM, failure to update the cisco Web site

  Hi all

  I want to know the reason why my AIP - SSM fails to update its signatures automatically from cisco website. I put the module do cisco automatic signature update, but it doesn't matter when he tries to update, it displays an error message that reads "= error: exception Autoupdate: HTTP failed to connect (1 111) ' find the exact error message attached. The interface of my AIP - SSM is behind the proxy of the company and I put the proxy to allow Module AIP - SSM establish a connection to the internet.  What could be wrong?

  Your help will be very appreciated.

  Concerning

  Automatic update to the signature of the IPS is not supported through proxy server.

  The configuration of the proxy server on the IPS is only for the overall correlation.

  You must allow direct access for the automatic update of signature to IPS.

• I can add a host for a new installation of the customer web vpshere

  I have a new installation of the UNIX client.

  I have a new installation of esxi 5.5

  I'm trying to manage the new host through the web client. How can I add this host to the web client?

  This seems to be the problem, the administrator@vc55 is you computer administrator account. Login with these and check?

  username: [email protected]

  Password: SSO master password

• Button refuses to make a link to the customer Web site

  Hi again. I'm having a problem, try to get a link button to my clients website. I have other buttons that go directly to Web sites and work very well, however I tried the last two days and still can not get on their site. When I click on the button I have attached what appears on the screen. It has nothing to do with the 20% that comes after the ".com"? I typed and re-typed a million times... of ideas... not great to have their portfolio which is not a link to their site. Any help would be so appreciated.

  

  

  This %20 is a space. You must remove the link.

  Bob

• Use the custom port vCenter

  Hello

  My vCenter is not configured with the default ports (80/443).

  How can I configure Navigator Infrastructure to connect to vCenter custom help portts? (81/443)

  Kind regards.

  Rafa

  Hi Rafa,

  Unfortunately browser does not support the unassigned ports by default.

  We'll see how give us priority to this need in future versions.

  Thank you

  NIR

• Update of the custom with the API fields

  Hi, (I am currently a place specifically to work on this, so I'd appreciate an urgent response.)

  Unless I missed something - there seems to be no document saying how to upgrade something else than the default fields? I use the RESTful API and could quickly recover contacts. The update Gets a 200 response - but how we update the custom fields?

  
  

  Here is a sample code... my guess to send just the name "internal" (line 3) does * not * work.

  
  

  $contact-> id = $id;

  $contact-> emailAddress = $lead1 ["emailAddress"];

  $contact->C_Accept_or_Reject_Date1 = time();

  $response = $eloquaRequest-> put ("data/contact /'. ') ($id, $contact);

  
  

  
  

  Update: I also tried the inner statement without success:

  $contact-> {'{{Contact.Field (C_Accept_or_Reject_Date1)}}"} = time();

  
  

  
  

  Thanks in advance,

  Sam
  

  Hi Sam,

  You'll want to see custom fields using their identifier unique and include them as part of a collection fieldValues can only be in your application. See the following example:

  'type': 'Contact,'

  'currentStatus': 'Action pending ',.

  'name': '[email protected]',.

  "accountName": "Eloqua, Inc..

  "address1": "111 Peter Street",

  "country':"Canada. "

  'emailAddress': '[email protected]',.

  'fieldValues can only be':]

  {

  "id': '100021."

  'value': 'value of the custom field.

  },

  ....

  Note that the fieldValues collection can only be contains a record for each custom and its corresponding value field. To search and retrieve the ID unique for your custom fields, you can use the following parameter:

  • GET (list): / assets/contact/fields? Search = {searchTerm} & page = {page} count = {number} & orderBy = {orderBy}

  We also have a post on to access the Contact fields that should help you.

  Please let me know if you need more information.

  Thank you

  Fred

• Updated the Imac to my wife to OS10.  Now have e-mail problems.

  Updated the Imac to my wife to OS10.  Had difficulties in obtaining the post to work.  Once I got it work keep changing to the old password.  We go to the system setting and correct the password for Internet.  Then, we go to the accounts and correct password.  The mail has been working for about 24 hours.  Now she can not sent and passwords will not be at rest.

  What is happening with this Apple!  I use to be able to count on everything works correctly without a bounch of workarounds. You're quick soaking in the quality of Microsoft.

  DDoes this works if you use the customer web email providers?

• How to properly use the fonts Web of Adobe Edge

  I am a newbie to Dreamweaver and am trying to learn to use it through the tutorials. I am stuck at part 3, try to use Web Adobe Edge fonts correctly in my web site. I can say that I followed the instructions in the tutorial correctly, but the effect of font style is not displayed on my site. I work on a Windows 7 machine and using Dreamweaver 5.5. I copied and pasted the javascript code in the correct point in the head of the index.html page that included the font family name in the CSS file and saved the whole smash. The source code of my index page looks exactly like the sample in the tutorial, and I tried see my site in my browser, but no dice. Does not display the Web dashboard font style in the web page. I think I did everything following the directions, but I guess I missed a detail. All suggestions greatly appreciated

  You must add a

  CSS:

  H1 {}

  Police-family: League Gothic, without serif.

  make-weight: bold;

  color: #639;

  font size: 250%;

  }

  A simple way to get the correct codes is to go to Adobe Edge Web fonts and select the font you want to use.

  https://edgewebfonts.Adobe.com/fonts

  NOTE: You will not see the custom web fonts displayed in Design, Live View mode, or when you preview locally unless you use a local test server.  An easier way to test is by downloading the page on your remote server.

  Hope this helps,

  Nancy O.