Update the text of the label on a XControl via a property
Hi all
I write various programs to help with the debugging of embedded systems. I often need to convert a value to byte into pieces and then show which of these bits are true/false. This is easily done by using the convert-bool-Bay VI. However, I would like to create a control that will allow me to display a name for each field of bits - a bit like the way records are described in the data sheets. The control must be a bunch of buttons, and then I can show the bits are true/false, and use the label of the button to hold the name of bit field.
I went from one way to the creation of this feature in an XControl as this seemed the best. My group of updates to Boolean values correctly according to the value of byte brought into control. However, I use a property to set the Boolean control label text (names of bit fields). My debugging shows that the text is assigned to the label of the control, but the control panel never changes. I tried synchronous updates, and by forcing a new drawing of the Panel using DeferPanelUpdates does not.
I would be grateful for any help on this - VI and XControl demonstrating the issue is attached.
Thank you
Ray
Probably, because you try to change the text of the label. Try to change the text of the legend...
For each boolean, choose "visible elements of legends '...
Tags: NI Software
Similar Questions
-
OnImmediateValueChanged cursor does not update the label text by dragging.
Consider the following:
Container { layout: DockLayout {} Label { id: label textStyle.base: SystemDefaults.TextStyles.BigText verticalAlignment: VerticalAlignment.Center horizontalAlignment: HorizontalAlignment.Center } Slider { fromValue: 0 toValue: 59 value: 0 onImmediateValueChanged: { label.text = value; } } }
When you drag the cursor, it does not update the text of the label smoothly. How can I achieve this?
Found the solution!
By mistake I used the value parameter and not immediateValue in the onImmediateValueChanged function!
-
Pavilion 500-368na: update the BIOS, do not install via HP Support Assistant.
I tried four times to install a BIOS update (SSID Roma family 2AF7;) Version 80.20Ap1) provided in the Support Wizard, the update only installs on every opportunity. I get no error message. Restart the computer, but the version remains (FRIEND 80,19 (2014-07-18)) previous BIOS installed.
I tried to stop my antivirus program, but that did not help. I noticed that hangs the command screen with a blinking cursor, but no statement is visible, and then my computer restarts.
Is it possible that the update is corrupted? Any advice on how I should proceed would be welcome.
Yes, HP has indeed pulled the update. Human system is in danger and you can continue to use your computer. Everyone here is always on my list of contacts as events change.
-
Update the vmWare tools in VoP via vCenter
I'm still new to this community and I hope I'll catch up here soon, but I'm not sure of the update process the vmtools on the device of VoP. I know once I spunt'sand he upwards and configured the IP etc, the vCenter as the tools were obsolete. Tonight is our night of patch management and we'd get VoP abreast, as far as tools go. What is the process to get this done? Do I just shoot vCenter or are there steps to perform on the server of VoP so.
Thank you in advance for your help!
Hi David,
You can update VMWare Tools on the device in the same way as you would for any virtual machine of OpenSUSE Linux. This can be done manually from the console if vCenter may not withdraw that, alone.
I hope this helps!
-
How update the content id when importing via archiver
Hello Experts,
I need to migrate some documents one env to another (about 500).
The problem is all content IDS are duplicated between the content source and target servers.
even if they have the same ID of content that they are not duplicate/revisions of the existing element.
I'm looking for a way to add them to the system as a new item.
Is it possible using what content ID can be re-created in the target Content Server when I import them.
I thought to use the cards to import == > map of value, but the update of 500 entries manually is a huge task.
One of the alternatives that comes to mind is programmtically export update archive.hda, with
Clauses like "0:IPM_000878:dDocName:IPM_000878_MG, 0:IPM_000888:dDocName:IPM_000888_MG, 0:IPM_001217:dDocName:IPM_001217_MG.
Please let us know of your entries.
Thanks in advance for your support.
see you soon,
Patricia
In your example had, simply add '_MG' to the existing value of dDocName to force the uniqueness. You can easily do so in an archiver import plan as shown below and simply import the archive.
-
Someone know where I can get a api for this?
Two ways:
1. use the SOAP API external product management and build something that does everything on a single click. Remove existing and re - data import. Requires the external server, but could be totally automated their existing database given enough information. That is to say. It happens automatically on a timer.
2. build an application of BC which is important and spend (assuming that CSV) file, but is also as well remove it prior to importation.
If the products do not change (ie. withdrawal of products) you need not even to delete before you import some update.
-
Change the Position of the label of the window cover
Is there a way to show the label to cover over the top or medium instead of the lower part of the active frame?
If I want the label to be full height, should what size I choose?
Also, if I update the label & smear the code below:
blackberry.ui.cover.labels.push({ label: 'Test', size: 10, wrap: true }); blackberry.ui.cover.updateCover();
Is it supposed to continue to add Test Test Test... or just once and replace it on the previous! Because sometimes I see two lines of the word, I don't know why.
Thank you
To align with instructions for interface user BB10, blanket labels appear on the bottom of the frame. A workaround that you can try is to set an image as the cover and in this image, design it so that the text is everywhere where you want it to be.
-
Get the label name XControl leave XControl
Hi all
Is it possible to get in the name of the label of an XControl placed on a front panel from inside the XControl?
I want to put some labels in the façade XControl name assigned to the XControl on a façade.
Thank you
So, you want a conscious XControl self-esteem?
This will do. Take the refnum in your state 'container' and follow these steps
Shane.
-
Repaint a page to update all the labels inside
Hi, I have a homepage inside a NavigationPane. When I have something by using the drop down menus in a Settings Page and I change pop() Settings Page, I will return to the main Page, but the main Page (stored in QSettings) values are not updated.
How can I force it to redraw itself using the values updated the Home Page Settings page? Or do I really have to define exhaustively the text of each label properties in the main Page?
I just find a workaround that does the job:
S ' ensure that all of your pages in the NavPane have a refreshment at the Page level feature
-In the NavigationPane, create an onTopChanged signal handler
-This signals Manager gives you a reference page to the new page that is located on the 'top' of the battery
-Call page.refresh () in the onTopChanged
Now when I go 'back' in the navpane, the previous page reflects the changes that have been made right. This works for me since I am committed to SQLite and my "Refresh" works just pull the latest data from the DB.
-
Change the label of text form field using javascript.
Hi all, need your help.
I have a field that will provide different information depending on the type of document.
I would like to change the label of the field of javascript in da
Thank you very much
Andrei
You can always set the page element and follow the following to refresh a specific region
APEX Oracle report update the easy way & laquo; Warp11. ::. Group knowledge Oracle Apex
Check the following for an option in jquery
change the text on the label based on toggle? -jQuery Forum
jQuery - label text change based on radio click - Stack Overflow
Kind regards
Vishal
-
How the text of the label for selection
Hello guys.
I need to select the text of the label.
I hope you can help me.
The labels don't support copy and paste. Use rather a readonly TextField to allow a user to select and copy text.
-
Call functions of the label text
I have a text that contains the names of user ("@username") and hastags ("#hashtag") and I want to run a function when one is clicked, like Twitter when you click on a username, it opens the profile page.
I'm currently divide the text to another label every time that a user name or the hastag is found and adding a handler to tap.
Is there another way to do it?
Are you trying to let the user invoke Twitter itself, or have your own custom behavior?
You can take a look at the ActiveTextHander: https://developer.blackberry.com/native/reference/cascades/bb__cascades__activetexthandler.html
-
The label text of discoloration
Someone at - it notificed that the last bit of the text in a label has applied discoloration?
I'm trying to disable because sometimes it can make the text difficult to read.
He comes to taking BlackBerry selection button used on other platforms.
If you want to adjust the text of the label, you can use textFit...
http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__label.html#property-TextFit
-
How to set the text of the label from a point of view to another view?
Hello
I have two view view home and view header.
House view contains the list of values.
To the poster of the header, there is Label which is a title of this provision.
When the user click on any value in home view I want to delegate control of the header display and to set the label text of selected line as heding on the display of the header.
First if these two finds are two page qml distinct or unique. If they are saparete pages then you must use a data model to fill the list with data. Now on the selection of a row of list
set the property in your House like this
property variant selectedData
now onTriggered signal write this code
selectedData = dataModel.data(indexPath)
and next page push, who do you think header, you can use this property value and fetch selectedData to display header
as
Label{ text: selectedData.title }
and if you have only the page containing the two views
Follow the same steps
and in this case, ontriggered signal set the label text
Hope this can help you
-
Update the text file app/native/assets/data/in the workspace?
I'm having a problem with updting a compressed file that is updated via a Web service.
It is pretty simple what I'm doing. first wait for the answer
QNetworkReply * response = qobject_cast
(sender()); check the data, etc.
location of the file is "app/native/assets/data/somefilename.txt".
QFile file (type);
If (file.exists ()) {}leader. Open(QIODevice::WriteOnly |) QIODevice::Text);
QTextStream out (&file);)
off<>leader. Close();
}
It works fine on my local machine when I run it on my Z30 by momentics.
But once I have add to my BES server and pull down on my workspace, the file is not updated. I can see the file updated in the application is correct the only thing is that the file not updated text. From what I see the "app/native/assets/data / ' is read-only.
My question is how update you text files that were packaged in the instalation of the app "app/native/assets/data / '?
Thanks in advance
It is not possible, assets / is read only when the application is deployed to the device, it is only readwrite on Simulator. data / folder can be used instead.
Optionally, the file may initially active resident / and can be manually copied to data / on the first start of the application. After that it can be updated in the data / folder.
Maybe you are looking for
-
How can I increase the size of the thumbnails
When wrote my newsletter and would like to insert a photo, thumbnails of the Photos are too small. How to increase or change the size. Previously, in iPhoto I could do this by making the usual movement of two diagonal fingers. Now, I was unable to fi
-
How to enter the BIOS on my Satellite 5205-S503 settings?
OK, I have a Satellite 5205 S503 t. I want to start using the CD so it can install my Windows XP Home edition disc, but it won't let me boot from the CD and I can't get to the BIOS. I tried the ESC F1 and it just says: the value (Y/N) When I type Y i
-
Satellite Pro A300 - USB laptop monitor noise
Hi all Had a problem every time I got back the lid of the laptop a bit beyond the vertical position - he makes her a USB device makes when it is plugged in. He can not understand why, but started the device built-in photo and with now I pushed the la
-
I can't find an icon of the trash anywhere
-
Combat Flight Simulator 3 will not drive install
The drive, which I bought, Combat Flight Simulator 3, cannot be read by my computer, 3 XP, Windows 8. I tried different ways to install this drive, but all without success. Microsoft Diagnostics can not read or the other. As far as I can check my