Update the value Table B if table A the value of different

Similar Questions

• Is Toshiba supports a utility to update the BIOS like DCCU?

  Hi all

  Another laptop to the manufacturer use a utility called the Configuration utility (DCCU) Client that can be used to update the BIOS for several models of laptops in the series.

  I searched on the web and these forums, but I can't find a similar tool for Toshiba laptops.

  Can someone point me in the right direction please?

  Thank you
  Scott

  Published by: admin

  Hello

  You should not compare the procedure of updating the BIOS from different manufacturers with the process of updating the BIOS Toshiba laptop.
  Laptop Toshiba computers come with special versions of BIOS (Toshiba & Phoenix) and on the update of the procedure is also different!

  If you want to update the BIOS of Toshiba laptop, you will need to first check if a new BIOS is available and you should check the statement and the update process.
  If I m not mistaken not updated the BIOS most on the most recent series portable Tosh must be done of Windows operating system.

  If an update BIOS utility like DCCU is unavailable for Toshiba laptops!

  Best regards

• Update based on the max value of different tables.

  {code}

  create the table rule_table (number rule_id);

  insert into rule_table values (10);

  insert into rule_table values (20);

  insert into rule_table values (30);

  insert into rule_table values (40);

  create the table auth_table (number of auth_id, rule_id number);

  insert into auth_table values (1000, 10);

  insert into auth_table values (2000, 10);

  insert into auth_table values (3000, 10);

  insert into auth_table values (4000, 20);

  insert into auth_table values (5000, 20);

  insert into auth_table values (6000, 30);

  insert into auth_table values (7000, 30);

  insert into auth_table values (8000, 40);

  insert into auth_table values (9000, 40);

  create the table pay_table (pay_id number, auth_id number, pay_indicator number);

  insert into pay_table values (11111, 1000, 0);

  insert into pay_table values (22222, 1000, 1);

  insert into pay_table values (33333, 1000, 0);

  insert into pay_table values (44444, 2000, 0);

  insert into pay_table values (55555, 2000, 1).

  insert into pay_table values (66666, 2000, 0);

  insert into pay_table values (77777, 3000, 0);

  insert into pay_table values (88888, 3000, 0);

  insert into pay_table values (99999, 4000, 0);

  insert into pay_table values (111111, 4000, 0);

  insert into pay_table values (222222, 5000, 0);

  insert into pay_table values (333333, 5000, 0);

  insert into pay_table values (444444, 6000, 0);

  insert into pay_table values (555555, 7000, 1);

  insert into pay_table values (666666, 8000, 0);

  insert into pay_table values (777777, 9000, 0);

  insert into pay_table values (888888, 9000, 1);

  create the table rule_pay (rule_id number, pay_max_indicator number);

  insert into rule_pay values (10, 0);

  insert into rule_pay (20, 0) values;

  insert into rule_pay (30, 0) values;

  insert into rule_pay (40, 0) values;

  {code}

  My intention is:

  for every find of rule_id on the maximum pay_indicator (tables 3 query to get the max Show pay_indicator below) and on the other table I have to update this value max based on rule_id.

  with max_tab

  as

  (

  Select a.rule_id, max (pay_indicator) pay_indicator

  rule_table a.,

  b auth_table,

  c pay_table

  where a.rule_id = b.rule_id

  and b.auth_id = c.auth_id

  A.rule_id group

  )

  Update rule_pay

  Set pay_max_indicator = (select max_tab.pay_indicator

  of max_tab

  where max_tab.rule_id = rule_pay.rule_id)

  where

  rule_id in (select rule_id from max_tab);

  The above query does not.

  Any help or suggestions are greatly appreciated.

  Something like that?

  SQL > select * from rule_pay;

  RULE_ID PAY_MAX_INDICATOR

  -------------------- --------------------

  10                    0

  20                    0

  30                    0

  40                    0

  SQL > fusion in rule_pay PR

  2. using (select a.rule_id, max (pay_indicator) pay_indicator

  rule_table 3A,

  auth_table 4 b,

  pay_table 5 c

  6 where a.rule_id = b.rule_id

  7 and b.auth_id = c.auth_id

  Group 8 by a.rule_id

  9        ) u

  10 on (u.rule_id = rp.rule_id)

  11 when matched, then update

  12 set rp.pay_max_indicator = u.pay_indicator

  13;

  4 lines merged.

  SQL > select * from rule_pay;

  RULE_ID PAY_MAX_INDICATOR

  -------------------- --------------------

  10                    1

  20                    0

  30                    1

  40                    1

  BTW, you can't put a WITH clause before an update.  It can only precede a select statement.

• Update the values in the Table from another Table containing historical data

  So, I have two tables, a table and a master table.  The current table is updated each week and at the end of the week, is copied to the main table to keep historical data.  I have update the table in progress early in the week and want to take the latest data from the master table and update the current table with the data.  The current table could have additional IDs or some of the IDS could have deposited (these lines would receive data in the main table).  I want to only update the rows in the current table that have existing data to the attr1, attr2, attr3 columns.  A particular ID may have more than one record in the primary table, I want only the last disk to use for updating the current table.  The data from a different database where no direct connection is possible then I have to import data every week.  Here are some statements of create/insert:

  create table current_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
  

  create table Master_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
  
  

  begin
  insert into current_T (ID1,adate)
  values ('IE111','08/02/13');
  insert into current_T (ID1,adate)
  values ('IE112','08/02/13');
  insert into current_T (ID1,adate)
  values ('IE113','08/02/13');
  
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE111','08/01/13','yes','abc','123');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE112','08/01/13','no','dgf','951');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE113','08/01/13','no','dgf','951');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE113','07/01/13','no','dgf','951');
  end;
  

  This has been a scratcher for me head and any help would be greatly appreciated.  I'm coding in Apex 4.1

  Thank you

  -Steve

  Not tested

  merge into current_t c

  using (select *)

  Of

  (select m.*

  row_number() over (partition by m.id1 m.adate DESC order) rn

  of master_t m

  )

  where rn = 1

  ) u

  on (c.id1 = u.id1)

  When matched then update

  Set c.adate = u.adate

  c.attr1 = u.attr1,

  c.attr2 = u.attr2,

  c.attr3 = u.attr3,

  When not matched then insert

  (c.id1, c.adate, c.attr1, c.attr2, c.attr3)

  values

  (u.id1, u.adate, u.attr1, u.attr2, u.attr3)

  ;

• How update the column in the table based on the value selected in apex4.1

  Hi all
  I have the following tables,

  leave_type table,it has the following fields,
  1.emp_name,
  2.sick
  3.casual

  and it has the values as follows,

  emp_name                  sick             casual
  guru                           10                10
  mishra                         10                10

  leave_master table and it includes the following fields

  1.emp_name,
  2.leave_type
  3.no_of_days

  I have the form based on the table "leave_master"
  Here, the leave_type has the LOV which includes.
  sick and casual.
  
  When the form is filled out and clicked on the button submit,
  I need to update the column leave_type in table leave_type,
  for example,.

  if 
  emp_name:guru
  leave_type:sick
  no_of_days:3

  then I want to update the leave_type column,
  sick sick = - no_of_days for the 'guru' of name
  That is to say, ill = 10-3 = 7
  
  then the leave_type of the table must be,

  emp_name                       sick             casual
  guru                                 7                10
  mishra                              10               10

  someone can such me what code or method I can use?
  Thank you.
  
  Published by: Gurujothi on May 24, 2012 21:54
  
  Published by: Gurujothi on May 24, 2012 21:54

  Try something like this...

  BEGIN
  IF: PXX_LEAVE_TYPE = "Sick" THEN
  UPDATE LEAVE_TYPE
  THE PATIENT VALUE = SICK -: PXX_NO_OF_DAYS
  WHERE EMP_NAME =: PXX_EMP_NAME;
  ON THE OTHER
  UPDATE LEAVE_TYPE
  DEFINE CASUAL = CASUAL -: PXX_NO_OF_DAYS
  WHERE EMP_NAME =: PXX_EMP_NAME;
  END IF;
  COMMIT;
  END;

• How to update the value of a value in a table

  APEX - 4.1.0.00.32
  Version of DB - 10 g
  Web - OHS server architecture
  Browser - IE8
  Theme - 9
  
  Hello
  
  I have a tabular form and I want to update the value of a field using a process based on an add-on.
  
  the name of the column in the form of tables is (name of column P22_PROJECT_ID)
  
  The error I get is
  
  ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
  
  Error unexpected, unable to find the name of the option at the page or application level.
  
  The field is questioned as
  
  Select pt.project_id P22_PROJECT_ID
  
  The code I'm trying to use in the process is
  
  : P22_PROJECT_ID: =: P10_PROJECT_ID;
  
  I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
  
  Any help would be appreciated.
  
  Thank you

  the tables for is on page 22?
  the project in page 10

  I think you go to page 22 page 10
  Create a new item in page 22 as p22_project_id
  Since 10 passes as a parameter the page p1o_project_id and set p22_project_id

  by default as p22_project_id

• Update the value of the column based on another value of the column to another table

  Hi all
  
  I have something very confused me and need your help.
  
  Having two tables A and B.
  
  Table A have 2 column (+ id + and desc1)
  
  Table B have column 2 also (+ transnum + and desc2)
  
  Now, I want to update the column desc2 of table B identical desc1 of table was where transnum of Table B same as the id of the table has.
  
  I use this SQL
  
  update of a2 set a2.desc2 = a1.desc1 of a2 on a2.transnum = a1.id inner join a1
  
  but this error occurs
  
  Error from line 5 in order:
  update of a2 set a2.desc2 = a1.desc1 of a2 on a2.transnum = a1.id inner join a1
  Error in the command line: 5 column: 35
  Error report:
  SQL error: ORA-00933: SQL not correctly completed command
  * 00933. 00000 - "command not properly ended SQL."
  * Question: *.
  
  * Action. *
  
  Hope someone can help me. TQ for help...

  SQL> create table a1 (id number(2),des varchar2(10));
  
  Table created.
  
  SQL> create table b1 (transnum number(2),des varchar2(10));
  
  Table created.
  
  SQL> insert into a1 values (1,'maran');
  
  1 row created.
  
  SQL> insert into b1 values (1,'ram');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> update b1 set des=(select des from a1 where b1.transnum=a1.id);
  
  1 row updated.
  
  SQL> select * from b1;
  
    TRANSNUM DES
  ---------- ----------
           1 maran
  

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.

• Select the data in a table and update in another table

  Dear experts,

  create the table TB_ENCRYPT

  (

  Identification number,

  Varchar2 (200) KEY

  );

  INSERT INTO TB_ENCRYPT VALUES(1,'HJUVHDUIFBSDGVU');

  SELECT * FROM TB_ENCRYPT;

  1 HJUVHDUIFBSDGVU

  create TABLE users)

  username, NUMBER of

  password VARCHAR2 (200)

  );

  Insert users

  values (1, 123 # "")

  Insert users

  values (2, 456 #')

  Select * from users;

  1 123 #.

  # 2 456

  I want to select the data KEY for table TB_ENCRYPT column and update in the column of tables for the respective key user password

  TB_ENCRYPT table contains only a single key value. Comparing this key, I want to update the old value of the key to the new value.

  For encryption and decryption I followed the java class method.no is worried about that.

  create or replace

  PACKAGE PCK_ENC AUTHID CURRENT_USER AS

  FUNCTION DECRYPT (VARCHAR arg0, arg1 VARCHAR) AS VARCHAR BACK LANGUAGE JAVA NAME 'Encrclass.decrypt (java.lang.String, java.lang.String) return java.lang.String ';

  FUNCTION ENCRYPT (VARCHAR arg0, arg1 VARCHAR) AS VARCHAR BACK LANGUAGE JAVA NAME 'Encrclass.encrypt (java.lang.String, java.lang.String) return java.lang.String ';

  END;

  SELECT PCK_ENC. ENCRYPT('1234','HJUVHDUIFBSDGVU') FROM DUAL;

  HERE,

  1234 - is the password of the users table column data

  HJUVHDUIFBSDGVU - represents the key of table TB_ENCRYPT column data.

  Comparing this key, I want to update the old value of the key to the new value.

  I tried with this method

  declare

  cursor c1 is

  Select the key

  of TB_ENCRYPT

  where id = 1

  update the id;

  Start

  for c1_rec looping c1

  update users

  password is PCK_ENC. Encrypt (Password, Key)

  the location being c1;

  commit;

  end loop;

  end;

  /

  Help, please

  You can use the MERGE statement.

  merge into users
  using tb_encrypt
     on (id = userid)
    when matched then
        update set password = PCK_ENC.ENCRYPT(password,key);
  

  And why you encrypt your password. This isn't a good idea. Just password hash.

• APEX: Update the table fields

  I am in dilemma here.

  I have a table as a table for the fields in this example two, a field is 'LASTMODIFIED' date and the other

  field, "Q1" where the user can be updated when necessary.

  "I have used trigger, so whenever the user updates the Q1, the ' LASTMODIFIED ' is updated to the last sysdate.

  This method works.

  "But during my UAT, I realized that if the"Q1"is null, the ' LASTMODIFIED ' will not update, until

  There is a value.

  I tried to tweak the trigger by checking if it has the value zero.

  create or replace TRIGGER "my_table_BIU_TRG".

  BEFORE THE INSERT OR UPDATE

  ON my table

  FOR EACH LINE

  BEGIN

  If

  : NEW. Q1! =: OLD. Q1 or

  : OLD. Q1 = null
  

  then

  : NEW. LASTMODIFIED: = SYSDATE;

  END IF;

  END;

  I was thinking about dynamic help to trigger the change, but because it is a tabular presentation,

  and with my limited knowledge, I think that maybe this isn't the right approach.

  Please indicate how to set my tirgger

  YAhooo!  Jitendra thanks!

• How can I update the table table of contents for the sub condition?

  Hi guys,.

  I have a custom table that must be updated in a table source 'abc ';

  I have to update 8 fields of 'abc', based on five keys corresponding between custom and abc records

  Here is the syntax I have a suite please let me know the effective way to do this.

  I get the error message for the syntax below. I think that 'FROM' keyword must not be use GTA?

  update of custom table one

  Set a.field1 = b.field1, a.field2 = b.field2, a.field3 = b.field3

  ABC b

  where value = ' 05 "

  Hello

  Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.

  Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

  If you ask yourself on a DML statement, such as UPDATE, then the CREATE TABLE and you post instructions INSERT must re - create the tables as they are to the DML, and the results will be the content of the or a modified tables when it's all over.

  Simplify the problem as much as possible.  For example, if your real problem involves 8 columns, try to post an issue affecting only 2 or 3 columns.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  2766124 wrote:

  Hi guys,.

  I have a custom table

  What is a custom table?  How is it different from a regular table?

  that must be updated in a table source 'abc ';

  I have to update 8 fields of 'abc', based on five keys corresponding between custom and abc records

  Here is the syntax I have a suite please let me know the effective way to do this.

  I get the error message for the syntax below. I think that 'FROM' keyword must not be use GTA?

  update of custom table one

  Set a.field1 = b.field1, a.field2 = b.field2, a.field3 = b.field3

  ABC b

  where value = ' 05 "

  An example of the correct syntax for the use of a subquery in an UPDATE statement is:

  UPDATE one

  SET (Field1, Field2, Field2) =

  (SELECT field1, Field2, field3

  ABC

  WHERE value = ' 05 "

  );

  This is a correct syntax, but I don't know if this will do exactly what you want, because I don't know exactly what you want.

  FUSION is often easier and sometimes more effective than updated.

• update the table account via a form

  Is this possible?  To create a section of the E10 form, there isn't a way of conceiving the fields into account in the form.

  We have an internal process to capture the customer account information on a quarterly cycle of our area reps.  We would like to set up a form so that they can write to the table account, while having only not to change after submission.

  Hello J,

  You can move values across tables using rules of deduplication (for identical records) and managers (update record). Here are under Contacts > data tools > rules of deduplication. You are right that the forms will only allow you to update Contact fields, but you can add a processing step to your form 'Add program', where your program includes a step of type 'run a game/deduplication rule '.

  That said, we recommend that you not data update CRM account Eloqua (I am not sure if that's your intention, but wanted to mention). Your CRM data into account should be the gold standard - data are updated only in that application and not by Eloqua or a different database. If you're just doing this for reporting purposes with Eloqua, it is fine, but you will notice that it didn't there no external call for 'update account' in Eloqua.

  Hope that helps!

  Thank you

  Gaia

• Update the table

  Oracle 11g r2.

  Try to write an SQL update.

  Table USER_TAB

  Primary key: user_id

  Foreign key: account_id

  Update user_tab

  Set message_sent = 'Y '.

  where account_id = 11111 and user_id = 2222 at the moment, I want to: set message_sent = null where account_id = 11111 and user_id! = 2222

  So the final result will be:

  USER_IS ACCOUNT_ID MESSAGE_SENT

  2222 1111 Y

  3333 1111 [null]

  4444 1111 [null]

  5555 1111 [null]

  6666 1111 [null]

  How should I write the sql?

  Thank you

  Scott

  Hello

  So, sometimes you want message_sent be something and other time you want message_sent be anything else.  This looks like a job for a CASE expression.

  Here's one way:

  UPDATE user_tab

  Message_sent = BOX SET

  WHEN user_id = 2222

  THEN 'Y '.

  NULL else - this is the default value, but it does not hurt to say explicitly

  END

  WHERE account_id = 1111 - 11111 or

  AND user_id IS NOT NULL

  ;

• Using the quick formula to update the pay_element_entry_values_f table

  Hi friends

  I have a requirement to substitute an input value of element with a value obtained from a quick formula.

  I know that formula quick results used to fill the table pay_run_results and pay_run_result_values.

  Is it possible that I can use the quick formula for updating the tables pay_element_entries_f and pay_element_entry_values_f

  Thank you

  Yes, you can do it.

  Just call a formula within your formula and in the service function, you can write the pl/sql code you want.

  So, you can use the input element in the pl/SQL API.

  Just note that even if the input values are updated that are not considered payroll (at the time of execution of the payroll)

  It would be only on the other (or additional payroll runs)

• How can I update the data in mysql using the button defined in the table?

  Hello

  right now I am doing my project for the online election system using dreamweaver cc14. I create a table using php code to bind the data to mysql, and in this painting, I create also a button "vote" for voters to vote. My question is, how can I update my polling data in the mysql database when voters push button "vote" based on the id of the candidates? Here is my code I try:

  <form method="post" id="form1">
        <?php
  $servername = "localhost";
  $username = "root";
  $password = "pass";
  $dbname = "ses";
  
  
  // Create connection
  $conn = new mysqli($servername, $username, $password, $dbname);
  // Check connection
  if ($conn->connect_error) {
       die("Connection failed: " . $conn->connect_error);
  } 
  
  
  $sql = "SELECT No, Calon, ID, Jurusan, Image FROM candidates";
  $result = $conn->query($sql);
  
  
  if ($result->num_rows > 0) {
       echo "<table >
    <tr>
    <th>NO</th>
    <th>Candidate</th>
    <th>INFO</th>
    <th>Vote</th>
    </tr>";
       // output data of each row
       while($row = $result->fetch_assoc()) {
           echo "<tr>
    <td>" . $row["No"]. "</td>
    <td><img src=" . $row['Image'] . "></td>
    <td><br/>-" . $row["Calon"]. " <br/>-" . $row["ID"]. " <br/>-" . $row["Jurusan"]. "<br/></td>
    <td><input type="."submit"." name=".$row["Calon"]." id=".$row["No"]. " value="."Vote"."></td>
  
    </tr>";
    if(isset($_POST["".$row['No'].""])){
  
    $vote_sachin = "UPDATE candidates SET Undi=Undi+1 WHERE No=".$row["No"]. "";
  
    $run_sachin = mysqli_query($conn, $vote_sachin);
  
  
  }
      }
    echo "</table>";
  } else {
       echo "0 results";
  }
  
  
  
  
  
  
  $conn->close();
  ?>
  
  
  
  
      </form>
  

  I hope someone can help me in this area, because I'm still new in this programming language.

  Thank you.

  Youre probably going to insert a 'radio button' next to the names of candidates and recover the database ID of that (I guess that the ID is the primary key in your database that uniquely identifies each record.

  His great confusion because you seem to update the database to aid WHERE no = "." $row ["no"]. so I don't know that ID is the primary key?

  IF "No" IS your master database key, you need to change the code below:

  TO:

  Here's the complete code based on the ID of your primary database key.

  <>

  $servername = "localhost";

  $username = 'root ';

  $password = "pass";

  $dbname = 'his ';

  Create the connection

  $conn = new mysqli ($dbname, $servername, $username, $password);

  Check the connection

  If {($conn-> connect_error)

  Die ("connection failed:".) $conn-> connect_error);

  }

  $sql = "SELECT No, Calon, ID, Jurusan, Image OF candidates";

  $result = $conn-> Query;

  If you click on the button "vote" form run the code to update the database below

  {if (isset($_POST['vote']))}

  Get the value of the ID of the radio button form field and store it in a table.

  $update_vote = $_POST ['candidate_id'];

  loop in the table and update the database

  foreach ($update_vote as $value) {}

  $vote_sachin = ' candidates UPDATE SET Undi = Undi + 1 WHERE ID = ".". " $value. » « ;"

  $run_sachin = mysqli_query ($conn, $vote_sachin);

  }

  }

  ?>

  <>

  If ($result-> num_rows > 0) {}

  ECHO '.

  ";

  each line output

  While ($row = {$result-> fetch_assoc())}

  ECHO '.

  ";

  }

  ECHO '.

  ";

  ECHO '.

  NO.	Candidate	INFO	To the vote
  " . $row ["no"]. "		-" . $row ["Calon"]. " -" . $row ['ID']. " -" . $row ["Jurusan"]. "

  ";

  } else {}

  echo "0 results."

  }

  $conn-> close();

  ?>