Learn the range angle parameter model 4

Similar Questions

• Can I use an alias for parameter such as 'The value of parameter value VI' entry in the palette of models?

  I played with the example Veristand 2015 "Set model Parameters.vi.

  Is it possible to use a parameter alias as the input string to the function 'Set parameter 2D Array Values.vi'? I tried to do this, but get the following error:

  Error 307662 has occurred to define model Parameters.vi > NI_VS ModelManager ExecutionAPI.lvlib: NI VeriStand - Set parameter 2D Array Values.vi

  Possible reasons:

  NEITHER VeriStand: The node is not found in the system.
  =========================
  NOR VeriStand: Could not find expression of parameter

  I am convinced that the alias has been implemented in the system definition correctly.

  If not, what the point of having an alias for parameter? Model workspace calibration controls don't seem to be able to use them. Am I missing something?

  Thanks in advance for any help on this matter.

  The alias parameter access is just for reading.

  To write to the parameter, you ned to use control of Calibration of model or the model parameters Manager API. Alias as the parameter cannot be used to write.

• Range the range must belong to the size of the buffer.

  Hello

  I'm pretty stumped on this problem. I have a chart with a picture of Chartcollections. The tables are filled in at the same time. Sometimes, quite randomly, I get this exception. In this case, I had three parcels posted:

  System.ArgumentOutOfRangeException was unhandled
  HResult =-2146233086
  Message = range slice must belong to the size of the buffer.
  Parameter name: length
  Real value was 3.
  Source = NationalInstruments.Common
  ParamName = length
  StackTrace:
  to NationalInstruments.Restricted.Guard'1.Satisfies (Boolean condition, Func 4 exceptionCreator, String format, Object [] args)
  NationalInstruments.Restricted.NIValidation.IsInRange [T] (1 keep, Boolean isInRange, format String, Object [] args)
  to NationalInstruments.DataInfrastructure.Primitives.RawDataStore'1.Slice (Int32 startIndex, Int32 length)
  to NationalInstruments.DataInfrastructure.Buffer'1.Slice (Int32 startIndex, Int32, Func 2 traitFilter length)
  to NationalInstruments.DataInfrastructure.Buffer'1.NationalInstruments.DataInfrastructure.IBuffer.Slice (Int32 startIndex, Int32 length)
  at NationalInstruments.Controls.Internal.DefaultAdjusterStep.a (IDictionary 2 A_0)
  at NationalInstruments.Controls.Internal.DefaultAdjusterStep.c (IDictionary 2 A_0)
  at NationalInstruments.Controls.Internal.DefaultPipelineDataProcessor.a (DefaultDataItemDescription [] A_0)
  at NationalInstruments.Controls.Internal.DefaultPipelineDataProcessor.a)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall (Int32 numArgs, delegate callback, object args)
  to the millisecond. Internal.Threading.ExceptionFilterHelper.TryCatchWhen (Object source, method Delegate, Object args, Int32 numArgs, delegate catchHandler)
  at System.Windows.Threading.DispatcherOperation.InvokeImpl)
  at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext (Object state)
  at System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  at System.Windows.Threading.DispatcherOperation.Invoke)
  at System.Windows.Threading.Dispatcher.ProcessQueue)
  at System.Windows.Threading.Dispatcher.WndProcHook (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  to the millisecond. Win32.HwndWrapper.WndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  to the millisecond. Win32.HwndSubclass.DispatcherCallbackOperation (Object o)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall (Int32 numArgs, delegate callback, object args)
  to the millisecond. Internal.Threading.ExceptionFilterHelper.TryCatchWhen (Object source, method Delegate, Object args, Int32 numArgs, delegate catchHandler)
  to System.Windows.Threading.Dispatcher.LegacyInvokeImpl (priority DispatcherPriority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
  to the millisecond. Win32.HwndSubclass.SubclassWndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
  to the millisecond. Win32.UnsafeNativeMethods.DispatchMessage (MSG & msg)
  at System.Windows.Threading.Dispatcher.PushFrameImpl (DispatcherFrame frame)
  at System.Windows.Threading.Dispatcher.PushFrame (DispatcherFrame frame)
  at System.Windows.Threading.Dispatcher.Run)
  at System.Windows.Application.RunDispatcher(Object ignore)
  System.Windows.Application.RunInternal (window)
  System.Windows.Application.Run (window)
  at System.Windows.Application.Run)
  at MyProject.FinalTest.Specific.GUI.App.Main (c:\Sandbox\Specific2\MyProject.FinalTest.Specific.GUI\obj\Debug\App.g.cs:line 0)
  at System.AppDomain._nExecuteAssembly (RuntimeAssembly assembly, String [] args)
  at System.AppDomain.ExecuteAssembly (String assemblyFile, Evidence assemblySecurity, String [] args)
  at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly)
  at System.Threading.ThreadHelper.ThreadStart_Context (Object state)
  at System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  at System.Threading.ThreadHelper.ThreadStart)
  InnerException:

  I don't know even where to start looking! Can someone please give me some advice? Thank you!

  I found the problem!

  I had a timer by calling the method, which has updated the plots of a queue. If there is too many signals, emptying of the queue can take longer than the next call timer, and two threads try to access the graphics paralel. I know that set the idle timer for the queue reading and turn it on after and looks of problem solved!

  Thanks for the idea of bouncing, that's the direction I had to start looking!

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• How can I learn the number of copies that were printed on my HP 8600 printer?

  How can I learn the number of copies that were printed on my printer HP 8600 (model CN578A)?

  I would like to see how many copies I'm actually contained in the inkjet cartridges - especially the less filled 'starter' cartridges that came with my new printer.

  Hi timeoffbob,

  Welcome to the HP Forums! I see that you're wondering, how do I know the number of copies that were printed on your HP Officejet pro 8600. I'm happy to help you!

  Please take a look at printing a status report. On the report, it will be number of printed pages. Printing a Test Page.

  Hope that answers your question and have a nice day!

• Map system PS1 PG failure of voltage is outside the range

  System model PowerEdge R720

  Revision of the system I have
  BIOS version
  1.6.0
  Firmware version
  1.40.40 (build 17)
  The lifecycle controller firmware
  1.1.5.165
  Version of the Firmware IDSDM
  N/A

   

   

  JOURNAL OF THE IDRAC

  Map system PS1 PG failure of voltage is outside the range.

  The food temperature 1 is outside the range.
  Power supply 1: status = 0x200c, IOUT = 0 x 0, VOUT = 0 x 0, TEMP = 0xc0, FAN = 0 0 x, ENTRANCE = 0 x 30
  Power supply 1 is operating normally.

  Tensions

  System Board PS1 PG Fail

  power configuration ,

  No redundant Reduncancy

  primary 1st turn on hot spare

  Thus,.

  -7/24 job server, can I fix this without stopping.

  -Power to POWER block? What should be the configuration of redundancy?

  Kind regards.

  NikolaTesla,

  If the power supply is switchable redundant power supplies hot, you can remove and replace the PS1 while the server is online.

  I suggest also, as best as possible, to plan downtime, update the current server.

  I see you're a few updates on BIOS, iDrac, as well as the lifecycle controller. Now with the BIOS and iDrac being 4 updates back, I suggest clicking on 'Other Versions' on these pages and updates up to current walk.

  Let me know if it helps.

• Are there plans for the new ESW 500 models switch with PoE capability?

  I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

  Reasons why new ESW 500 switch with PoE capacity are necessary:

  • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:
    • 7945, 7965 and 797 x phones
    • series phones (not yet supported with the SBCS solution) 9900 and 8900
    • PVC2300 Surveillance Cameras
    • AP541N access points
  • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
  • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

  Existing ESW 500 switch PoE capabilities are:

  • ESW-520-8 P: 60W
  • ESW-540-8 P: 120W
  • ESW-520-24 P: 180W
  • ESW-540-48P: 380W
  • ESW-540-24 P: 280W

  PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

  • 8 port: 123.2W
  • 24 port: 369.6W
  • 48 port: 739.2W

  Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

  Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

  • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
  • A typical deployment would most PoE devices connect to a switch.
  • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
  • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
  • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

  We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

  Thanks again for the question,

  Stephanie Reaves

  Cisco Small Business

• What is the range of values of type of data accepted by prepareBulk file?

  In the Oracle documentation under "bulk 7.12 load graphics Using RDF Semantic support for Apache Jena", I see the code example for perpareBulk. The third parameter is documented as "type of data file: can be RDF/XML, N-TRIPLE, etc.". I found a thread code example that uses "TTL." as a value as well. It seems that "TTL" is accepted but not documented. What is the range of accepted values for the type parameter of data to prepareBulk file?

  Hello

  You can use the triple data serialization format following as string values:

  "RDF/XML", "N-TRIPLE", "TURTLE" (or "TTL") and "N3".  "RDF/XML-ABBREV" is a synonym for "RDF/XML".

  For the quads, you can use either "N-QUADS" or "TRIG".

  Thank you

  Zhe Wu

• Colors of the range

  I am learning how to set colors in the range and am not having much luck. I googled 'how to fix colors in the range' and tried three different options, but none seem to work as described. If I go to select > color range and choose Gamut is selected too many image, not only the elimination of the colours of the range. I tried to use the new layers of adjustment without result. What I am doing wrong? It doesn't seem like it should be this difficult.

  It is, in fact, the Holy Grail of digital image processing. Yes, it is difficult and worth in special cases, for particularly important pictures. Most of the time, you are better off just letting profile handle it, and if she clips, so be.

  Remember you are probably looking to a lot of cutting, color range every day. If your monitor is a unit of the standard range (i.e. 99.9% of all monitors out there) - then all you see is sRGB (or something very close to it) anyway. Nothing outside of sRGB-ish is brutally cut off by the display profile, out-of-gamut of the display.

  The risk is mainly by losing the details and texture. The only way to get this texture is by some kind of desaturation and the trick then is to do it on the affected areas.

  It is useful to look at what threshold effect is really: what is so saturated that it wants to get out of 255 0 in any single channel, in this particular color space. So it clips to 0 or 255, and when you look at each of the channels, these areas are turning to the high black white solid or solid (true with true black and white). You can spot in the histogram too.

  Here's a long thread on the forum of Luminous Landscape discussing this: http://forum.luminous-landscape.com/index.php?topic=100689.20

• Error trying to save the binary XML storage model scheme

  Hello
  
  I am trying to record my XML schema to the server 11 g for use in the binary XML storage model. Here are the details:
  
  BEGIN
  () DBMS_XMLSCHEMA.registerSchema
  SCHEMAURL = > ' / sys/schemas/ACSSWEB/ALLMDN_BinaryDetailsSchema.xsd',
  SCHEMADOC = > XDBURIType('/sys/schemas/ACSSWEB/ALLMDN_DetailsSchema.xsd').getBLOB ().
  LOCAL = > TRUE,
  GENTYPES = > FALSE,
  GENTABLES = > FALSE,
  OPTIONS = > DBMS_XMLSCHEMA. REGISTER_BINARYXML);
  END;
  
  I get the following error message:
  
  Error report:
  ORA-00406: COMPATIBLE parameter must be 11.0.0.0.0 or higher
  ORA-00722: feature "binary XML".
  ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 37
  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 65
  ORA-06512: at line 2
  00406 00000 - "COMPATIBLE parameter must be %s or more."
  * Cause: The COMPATIBLE initialization parameter is not high
  sufficient to allow the operation. Allowing the command would be
  the database is incompatible with the version specified by the
  current COMPATIBLE parameter.
  * Action: Shutdown and commissioning with a higher compatibility setting.
  
  
  (1) someone can you please confirm - if change the compatible parameter will help accomplish this?
  (2) is there one other way (other than to change the compatible parameter) to make this work? My DBA are not immediately ready to change the parameter with the fear of breaking legacy applications even in the test environment. I seek an alternative solution to help me analyze the binary XML storage model.
  
  PS: I am a newbie to XML DB native development. So please forgive me if I asked a very simple question.

  Binary XML is a feature of Oracle 11, which is why the error message.

  There is probably an event (Oracle support/internal) parameter that once was able to make this happen in point 10.2 as well or, despite you must also update some of the registered scheme etc., etc., etc. to the point 10.2...
  In short: he took no other way responsible to do. Set the compatible parameter 11.x if you want to use storage binary xml based schema.

• Recommendation for the best and most models of many

  So far I'm loving Captivate 6.  One small complaint is the limited number of models (in comparison, for example, Lectora). Can anyone recommend by personal experience, a site that provides the best models in terms of quality and diversity?  By Google I found "elearningtemplates", but have no experience with them, and I don't know if something better is out there.  Recommendations greatly appreciated, as well as personal experience.

  Thank you!

  Mark

  Mark,

  I heard that the 6 Captivate team creates more templates, not sure when it comes out. You can also create your own.

  I did a webinar and blog about what you can see: http://captivatecrazy.blogspot.com/

  Also, e-Learning brothers have good models: http://elearningbrothers.com/

  I have a PDF of resources on my blog at: http://captivatecrazy.blogspot.com/2012/04/download-pdf-with-links-to-captivate_9412.html

  Anita

• Is it possible to access the task flow parameter in the EOImpl.create () method?

  Hello
  
  Is it possible to access the task flow parameter in the EOImpl.create () method? In the affirmative, please let me know how to access.
  FYI... I have a CreateInsert < xxx > activity in the workflow, which, I believe, called the EOImpl.create () method internally. During the creation of the entity, I want to assign a default value based on the parameter of workflow.
  
  Thank you

  A way to pass parameters from workflow for the model is during the initialization of the workflow. To do this, you can create a prepare() method in the Module of your Application and call it from the workflow. By defining this method by default in your workflow, it will be called every time that the workflow starts. You can pass any task rate desired as the arguments of a function prepare() method. In the prepare() method, save the workflow of the values for parameters in the transient variables EO or VO. These variables will then be accessible in the create() methods.

• Pass the range to SEE the Report Builder report

  I'm more than one gui that a coder so I like working with ReportBuilder if possible. I'm almost done with a parameter-driven report but need help to show the range of dates at the top of each page. A .cfm page has text boxes where the user between the beginning and the end of date range, they want to see and it also has a categories box to the report. It works fine, but I want that the range of dates that the user specified in the top of each page with the title. Thanks for any help.
  
  John
  
  ========================
  
  Found an answer here: http://www.houseoffusion.com/groups/cf-newbie/thread.cfm/threadid:886 #3691

  I'm more than one gui that a coder so I like working with ReportBuilder if possible. I'm almost done with a parameter-driven report but need help to show the range of dates at the top of each page. A .cfm page has text boxes where the user between the beginning and the end of date range, they want to see and it also has a categories box to the report. It works fine, but I want that the range of dates that the user specified in the top of each page with the title. Thanks for any help.

  John

  ========================

  Found an answer here: http://www.houseoffusion.com/groups/cf-newbie/thread.cfm/threadid:886 #3691

• is it possible to export each chapter in FCPX like a movie without using the tool of the range separated

  I have a movie I created with 26 chapters in there.  I want to export all the individual chapters as separate movies.   I know it's possible by making each chapter using the tool of the range and export everything that is selected.  But, I'm looking to win time by selecting all the chapters may export both.   Is this possible?

  Thanks for any help you can give me.

  NO you must do them sequentially, even if you don't have to wait for it to finish before you can start the next. Stack them just to export in a sequential manner.

• Unable to choose the range in iMovie

  Unable to choose the range of iMovie 10.1.2

  Hi, Jeff.

  You can select a range inside a clip with your clip in the timeline, placing your cursor on it and hold the 'r' key when you drag your cursor over the clip while pressing your mouse or track pad.  The range will be described in a yellow box.

  To select a range of multiple clips, select the first clip, and then select the last element while holding down the SHIFT key.

  Best,

  -Rich