Update Windows with LUA (error 0x8024200E)

Similar Questions

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• Updates Windows with the error 0 x 80070426

  Updates to title: original Windows with Error 80070426

  I have 9 updates for windows 7, which failed to install. Any help?

  Thank you

  Hi fpduarte,

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method 1: Run the Windows Update troubleshooting tool and check if that makes a difference

  Open the Windows Update troubleshooting tool

   

  Method 2: Run the fixit available in the link below
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 3: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Please check and confirm if Windows is activated
  How to tell if Windows 7 is activated?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot perform the update Windows with the error code A 8024, 000

  Original title: error code 8024A 000, does that mean?

  I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

  Hi Anthony,

  1 are you facing this problem with any particular Windows update?

  2. What are the troubleshooting steps you have tried?

  Please follow the links and check with the question:

  Method 1:

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Method 2:

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  I hope this helps.

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• can not update windows, 8024400 has error code

  I can't update windows, get the error message 8024400 a. have tried to repair, but it will not work until I update windows.

  What browser (exact version) you are using. ?

  Harold Horne MVP responded on 24 September 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  UTC/GMT is 01:04 Saturday, October 6, 2012

• Impossible to update windows xp, 0x80440A error code

  I could not update windows xp, 0x80440A error code

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Update Windows Defender 80240016 error and McAfee Internet Security program not scan

  Original title: I get an update of Windows Defender 80240016 error. What can I do about it?

  I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?

  I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?

  McAfee must have disabled Windows Defender during the installation of McAfee.

  You must disable Windows Defender.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

• Windows updates failed with the error 646

  Original title: your important updates failed?

  I had a bunch of updates fail! 1 opf updates has a 646 error code how can I fix these problems? A large number of updates failed have to do with office 2007 and office 2010? Help! I don't know if it will get a faster response or not, but these are the numbers on the 1 who failed to update this morning KB951550 KB951944, 967642, SP-2-they keep repeating the same numbers approximately 4 times that say failed?

  Hello

  You can try to download and install the updates manually and check if that helps. To download them manually open the link given give the articles below and download the correct version of the update for your computer and install.

  http://www.Microsoft.com/downloads/en/default.aspx

  Before manually installing updates, configure your computer to clean up state of startup and then continue the process. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have finished installing the updates, follow step 7 in the article to start on normal startup.

  Updates related to Microsoft Office, you can follow the suggestion given in the article below.

  http://support.Microsoft.com/kb/2258121

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Windows 7-64 update fails with the error 800b0100 for KB3064209

  Repeat this "update and recovery" perhaps I posted in the wrong forum subdivision for assistance.

  I need help with this error. I ran FixIt and troubleshooting tool. FixIt stared at her, but the troubleshooting tool set certain elements and certain interpretations of left. The remains of the installation problem. I can not install KB3064209. Errors which remain and which are not fixed by troubleshooting tool are:

  • Missing or damaged service reg
  • Error 0 x 80070057 not set
  • Component Cryptographic Service not registered

  I don't know how to correct that elements. Any ideas?

  Thank you in advance,

  VIC

  Overtaken by events: win 10 installed successfully.

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Update Windows XP 0x8712F638 error code.

  After you install the Windows updates today on my Windows XP pc, restart I get error code 0x8712F638and it seems that the hard drive no longer exists. Nothing seems to work even not the disc to reinstall Windows.

  Desperate. Help, please!

  * original title - updates killed pc - hard drive disappeared. *

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636 [1]

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  =====================================
  [1] VERY IMPORTANT!-online Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) whenever Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (for example,Microsoft Security Essentials - free).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• UPDATES FAIL WITH 646__ ERROR CODE

  I TRIED TO DOWNLOAD THE FOLLOWING UPDATES, BUT THEY ALL FAIL WITH THE ERROR 646 CODE

  Update for Microsoft Office Word 2007 (KB974561)
  Update of security for Microsoft Office 2007 System (KB973704)
  Update of security for Microsoft Office Excel 2007 (KB973593)
  Update for the junk e-mail in Outlook 2007 (KB975960) filter

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot download updates Windows, get the error number: 0 x 80240036

  Had to install the new hard drive and then reinstalled in new PC software through CD obtained from DELL when the machine was first purchased, which includes Windows XP Home Edition.  PC is a Dell Dimension e 310.  Since the upgrade, I could not install Windows updates, get the message that lies beneath.  Using Vipre anti-virus only software.  Please help someone, I tried so many remedies, always with no success.  Thanks in advance.

  [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 3

  You can read the article.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  See also:

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144