Updated BIOS for HP a730n desktop
Nice day!
I have a HP Pavilion a730n office, I want to upgrade to Windows 8.
The problem is with the BIOS that does not have the bit eXecute Disable (XD) feature enabled. It is a requirement for Intel processors.
I followed the instructions for the other requirements such as SSE2 and EAP, which is available on the motherboard.
I need only enable support XD, which does not show from anywhere in the BIOS, set up.
Also I checked Microsoft guidance that all processors that support NX also support SSE2. So if I have SSE2 then NX/XD support should be there too.
So, how can I get a BAD BIOS update to support XD/NX?
The motherboard is Asus PTGD1 (Louisiana). I tried their support too, but no luck so far.
Thanks in advance for any help with this.
See you soon!
You can upgrade to a more recent or new PC.
Your PC was introduced on the market in 2004. The motherboard is too many generations behind current Intel platforms to meet the requirements of the system of Windows 8.
There is no upgrade BIOS for your motherboard. The only update of the BIOS that was provided was on 2006-05-10, Version: 3.28.
Tags: HP Desktops
Similar Questions
-
Question about updating BIOS for Satellite 2450-101
Hi, I want to update BIOS for my Satellite 2450-101 (model: PS245E-01TMY-IT). I downloaded the BIOS "bios - 20071008123347.zip" on Toshiba Europe site (see link below). Is this the right one for my PC?
What do you propose to make a backup of the existing before installing the new?I want to make an extension of memory, but I'm not sure whether this is necessary. Do you reccoment to update the bios anyway?
Thank you very much!
Hello!
Yes, it's the good BIOS because it s also for your model (Satellite 2450-101).
A BIOS update is an upgrade of RAM is not necessary. The BIOS has nothing to do with the maximum RAM capacity.
Satellite 2450-101 supports up to 1 GB, type PC2100 DDR - RAM.Good bye
-
Updating BIOS for Sony VAIO PCG-4F1L (VGN-TX650P)
Hello
I can't find the BIOS update for the Sony VAIO PCG-4F1L (VGN-TX650P).
Hello
Yes, update BIOS for VGN-TX650P of computer model is not available for download.
If it is available in the future, you can mark the page below and chek.
VAIO CAre advise for these updates if you are using the original factory installation operating system.
Thank you
Jack -
Updating BIOS for MSI N1996 MS-9613 Indio Motherboard Patch 253 error
So here's my dilemma:
I bought a HP e9270T renovated in 2009. Over time, I upgraded my machine in various ways, a box with a better circulation of air, a new power supply, more RAM, etc. And now, I tried to update my BIOS of motherboard after a recent installation of SSD.
I found the link for the BIOS to latest update here:
http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTy...
It keeps giving me an error saying incorrect patch or something in that sense, the real message can be found here:
http://imgur.com/a/NB4cZI had the motherboard model number right the Board of Directors itself.
And apparently, because I forgot to write the serial number on the former stop, HP refuses to answer my question by phone, even though I gave them every bit of information they could possibly need.
I want just a solution to my problem of update,
I hope you all can helpHere are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite e9270t CTO and here's the specifications of its card mother MSI MS-7613 (Indio). This is the software HP & Driver Downloads page for your HP e9270t computer. There is no update of the BIOS for your system.
The reason why you are having problems, install the update to the BIOS, you downloaded it, is because it is one of the several other MS-7613 motherboard which are different. Different motherboards MS-7613 go under the names of Indio, Inverness and Iona. Please note that the BIOS is unique to each of these different Councils.
-
Updating BIOS for Satellite M100-150
May indicate the reference of BIOS for Satellite M100-150 for Windows XP download, on an official website, I can not download, the reference does not work.
I use the translator so that for the quality of the translation, I don't answer. :)Hello
Here, you need to check if the Bios update is available for your model, otherwise I think that there is not another source to download here.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
??????. ?????? ?? ??????, ?????? ???? ?????? ? ??????. ????, ?? ???????, ?????? ??? BIOS? ???? ???????????? ? ?????? ????? ???? ????????).
Sorry, guys I have replied in Russian, just want to help him because of the bios
-
Updating BIOS for Satellite Pro S300
Hello
An update of the BIOS for Satellite Pro S300 series, even if there is no change log so there not sure it will set.
Down here at Toshiba
Concerning
Phil
Hello!
Thanks for this info :)
I have never seen anyone from Toshiba but maybe they only read here.
I don't know, sorry.Good bye
-
Updating BIOS for Satellite C55-A-1RG can not be downloaded - 404 not found
I can't download the update of bios for laptop Satellite C55-A-1RG.
I go to http://www.toshiba-greece.com/innovation/jsp/supportMyProduct.do?LNG=28&service=SE and when I click on the link02/12/14
Update the BIOS
Toshiba OS independent 1, 10 - WIN World WideIt shows me
404 not found
NginxNobody knows the correct link because I want to install windows 7, only the laptop for one of my clients and with the bios that have the laptop by default some options (start secure-> disable and start-> start MSC mode) and I can't install windows 7.
If anyone knows of another way to install windows 7, it will be very useful.
+ The message was edited: link has been removed.
Hello
It seems that pilots could be downloaded again.
You should be able to download this BIOS update package:
[BIOS v1.10-VICTORY for Satellite C50-has, Satellite Pro C50-has, Satellite C55-has | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7936 & selSh ortMod = 4433 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 89306 & OS ID =-1 & driverLanguage = 42] -
Question about updating BIOS for my Satellite M40
So, my laptop does not start, but works recovery procedure. Support suggested me to update my Bios.
OK, given that the last time, it was easy.I downloaded the newsest version vor my Satellite M40 (PSM40) (1, 70 - WIN<= i="" have="" an="" ati="" grafics="" card)="" and="" extracted="" the="" bios-20070709161345.zip="">=>
But there was a surprise:
Instead of getting the old data structure, as written in the FAQ update Bios
1 extract the zip file containing the BIOS upgrade to a temporary folder.
2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"I get a file only: BIOS of Windows Knockhill10GV170.exe
Extraction of it I get 8 files:
-fdbase.img
-InsydeFlash.exe
-iscflash.dll
-iscflash.vxd
-KPM170. ROM
-Platform.ini
-The c:\windows\system32\unicows.dllNow my question: How can I create this bootable CD-ROM to update my Bios?
Just to know: download all the other things are done on my desktop from my laptop is not starting ;)
I also tried to run the exe in the hope that it will create a floppy disk or a CD-ROM, but it is written "basic cfg address not found."Hello
Update the BIOS there are two ways to do this:
-Traditional mode (TRAD) and in this case, you need floppy
-Windows (WIN) and this update can be done under operating system running.Update BIOS WIN will work if you run Windows on your laptop satellite. If I understand your assignment well you are trying to do traditional BIOS updated, but using the BIOS to WIN update. On the Toshiba download page, there are two listed BIOS updates and two of them as versions of WIN. This means that you can update the BIOS under operating system only.
Back to your problem: in the history one thing confuses me when you write: my laptop does not start, but works recovery procedure. Sorry, but if the recovery procedure is working and you will have clean installed OS.
Be a little more concrete in our laptop does not start. What happen exactly when you press the power button / stop?
-
Updating BIOS for Equium A60-181
Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
I was wondering is it worth the update, unfortunately, there is no information
provided regarding the bugfixes or improvements? Also can I use the
Windows update tool or use the bootable CD, it's just I'm not sure
flashing Windows XP, except if it is a procedure without normal fault?see you soon,
Richard S.
Hi Richard
Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.
If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.
-
Updating BIOS for Satellite Pro 4600
Hello everyone,
I'm trying to update the bios and I followed the instructions, but I don't know what the problem is.
1 - download the files
2 - unzip them filed in a non-bootable disk is.
3 - restart the computer with the disk in.
4 - press f12 during startup.
5 - nothing happened, the system asks me remove the disk, but nothing is updated.Thanks for your help.
Hello
I found this statement to update the Toshiba BIOS for this series of portable:
1 extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding the type of disk to use).
2. make sure that the laptop is plugged into the sector.
3. turn off the laptop.
4. turn on the laptop with the F12 key. Press and hold until a short beep can be heard.
5. the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward"will appear.
6. place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin.
7. When prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart" remove the disk and press the RESET switch (if available) or turn the system off and turn it on again to restart the laptop.But note; Update the BIOS is always risky! If your laptop works ok, then update the BIOS is not really necessary!
Greetings
-
Need update BIOS for Portege 3440CT
I have search on the Toshiba Site for updates to the BIOS for a 3440CT Portege, but couldn't find anything for older models. Are they still available? Also the BIOS of the laptop at the present time is 1.50, CAP, someone tell me what the latest version is?
Thank you
Neil
You must visit the Toshiba driver page:
http://forums.computers.Toshiba-Europe.com-> support download &-> download driversYou will see an upload form.
In order to choose here;-Archives
-Portege Archive
-Portege 3xxx
-Portege 3440Good bye
-
I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...
Error code: 3033
"GoTo" label not found
on line 89 of w:\patches\i...ate\windows\installer.wbt
My system is...
Compaq Presario SR1339uk
Serial number: CZB5050HBW
System number: PS267AA
Motherboard: Asus PTGD1 - LA
BIOS version: 3.13 12/14/04
Operating system: Windows XP Home Edition
Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.
Assume that you download SP26760.exe (BIOS 3.28)
Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).
Open a DOS (command prompt). You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.
Once in the BACK, type:
CD FOLDER
go the the directory of temporary files.
Then make a
DIR /S 328.LE ROM
to find the directory where the update files are located. Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)
CD pft467D.tmp
Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches. By omitting the switches can cause other problems, as have reported activation of Windows problems.
AFUWIN /i328. ROM /pbc
For reference, on my system, here's what I saw in these folders:
C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir
Volume in drive C is DRIVE_C
Volume serial number is FE8F-4AA6Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp
26/04/2011 11:11 < DIR >.
26/04/2011 11:11 < DIR >...
24/01/2006 15:31 524 288 328.le rom
01/07/2004 10:54 53 248 AFUWIN.exe
01/07/2004 10:54 amifldrv.sys 6 912
21/02/2006 18:08 526 374 Installer.exe
09/05/2006 17:10 sp26760.rtf 1 784
11/04/2005 10:55 398 696 WBDEG44I. DLL
6 file (s) on 1 511 302 bytes
2 dir 110,361,944,064 bytes freeC:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc
It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do. If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.
For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.
Good luck.!
-DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).
-
Satellite A200 - corrupt 2.40 update BIOS for Vista x 64
Hello
I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:
BIOS update failed, check the image failed. error code 200
I put t know what happened.
Where can I see what is this error 200?
Has anyone installed this new BIOS?Do you use the 64-bit version of Vista?
The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)
-
Can't find an updated BIOS for Satellite A30
Hi friends.
I'm not found Toshiba A30-203 a new BIOS update.
I want to install windows vista but this sccren error.
Error message:
"A computer has been detected and windows has shut down to prevent damage to your computer.If this is the first time you2ve seen this Stop error screen restart your computer. If this screen appears again, follow these steps:
The BIOS in this system is not fully ACPI-compatible. Please contact your system provider for an updated BIOS. »
to apologize for my bad English.
Hello
It seems that the Satellite A30 series is a series that was shipped with the BIOS to no support for Vista.
I think that it should be possible to install Vista after a update of the BIOS.But know that you will ask for the new version of the BIOS. Am I wrong? ;)
Well, on the page of the Toshiba BIOS, you should find different versions of BIOS.
It is very important that you check the more info option you will resume the BIOS updated. You will find information on the compatibility of the BIOS (not every version is compatible with all units).But as you know that Vista is not official on the market. As I remember, it should be possible to buy the operating system in January 2007.
I think Toshiba will present a new version of BIOS for Vista in next time. So I hope ;) -
Impossible to update BIOS for Satellite M40 - 135 - bios is not ACPI
I had problems with the upgrade of the Bios on my laptop.
I can't install windows xp before JC.
I got BSOD "the BIOS in this system is not fully ACPI-compatible.Yes, I tried F7 and nothing helped! The bios only I found here is 1, 70 - WIN and that only works on windows. So I can't install also what I did I install windows 98 on it and my system is in place but I tried to install the Bios, I got error. So I can't start it to update.
On this forum I saw it there has updated trad 1.70 if toshiba support team can send it to me on the email address so I could update the bios my bios is 1.0!
Thanks in advance for any help!
Hello
First team Toshiba is not here in the forum user to.
Secondly it can update BIOS victory only running Windows OS-based, it would be best that the use of the Toshiba preinstalled version of Windows in order to run the BIOS update.By the way; I found versions of BIOS Toshiba U.S. on page here, you can download the traditional BIOS which can be updated using the diskette.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Notes; Toshiba laptops, US have different model numbers.
Maybe you are looking for
-
How to find the switch wireless on Equium L20
Where is the switch wireless on an Equium L20-264?
-
Unable to print on Windows 8 with Color Laserjet 1600
I installed DOT4x64.msi on my new laptop HP Windows 8, since this seems to be the only average current to connect my Color Laserjet 1600. The printer will now appear in the section "Devices and Printers" Control Panel. But when I try to print someth
-
HP Photosmart Premium C309g-m: HP Solution Center
I have had this printer for some time, but in the last 6 months or so when I try to open the HP Solution Center, I get a window with the following message: "HP Solution Center cannot be run because your installation of the device is not complete. Pl
-
1,2,4 and 5 do not work for some reason any when I tried to do the method 3 and go into services, it won't let me change the settings... Make sure that you do not take to remote procedure (RPC) Locator call *. Right click on the remote procedure call
-
Hello I'm completely puzzled here. When I started my computer today I got a notification saying one of the start-up programs exe file has been corrupted. I think that "uhoh". Then my antvirus software is dΘmarre with the same and I get the notificati