UpdateDisplayList tree question

Similar Questions

• Spanning tree question

  I have a stack of 4 switches PowerConnect 7048 core. There are unacceptable delays on the network so I'm cleaning configurations and verification spanning tree as these have been set up by he previous admin. The four active links of 10 GB, the spanning tree different reports States:

  two are

  Te3/2/1 port active
  Status: Disabled role: disabled
  Identification of the port: 128.167 shipping: 0
  Fast port: no Protection from root: No.
  Designated the bridge priority: 4096 address: 5C26.0AAA.1EA6
  Identification of the designated port: 0.0 cost of access road designated: 0
  Root regional CSE: 80:00:5 C: 26:0 A: AA:1E:A6 CST Port cost: 0
  Root Guard..................................... FAKE
  Loop Guard..................................... FAKE
  TCN Guard...................................... FAKE
  Portfast auto... TRUE

  and two are

  Te2/2/2 port enabled
  State: Forwarding role: designated
  Identification of the port: 128.112 shipping: 2000
  Fast port: no Protection from root: No.
  Designated the bridge priority: 4096 address: 5C26.0AAA.1EA6
  Identification of the designated port: 128.112 cost of access road designated: 0
  Root regional CSE: 10:00:5: 26:0 A: AA:1E:A6 CST Port cost: 0
  Root Guard..................................... FAKE
  Loop Guard..................................... FAKE
  TCN Guard...................................... FAKE
  Portfast auto... TRUE

  . I think the first one indicates a problem and all must be reported as the redirection and designated. Is that correct and if so, how can this be done?

  Thank you

  Hello

  Does not serve a disabled state. If you do not disable spanning tree, it should allow. http://downloads.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/PowerConnect-7024_Reference%20Guide_en-us.PDF page 745

• The tree question

  Request Express 4.1.0.00.32
  
  I created a tree using the following query:
  
  Select case when connect_by_isleaf = 1 then 0
  When level = 1 then 1
  of another-1
  end the status,
  level,
  MAJR_DESC as title,
  NULL as an icon,
  MAJR_CODE as value,
  majr_desc as ToolTip,
  ' f ? p = & APP_ID.:2: & SESSION. : NO::P2_MAJOR:' | MAJR_CODE link
  of ' #OWNER # '. " WLMAJORS ".
  Start with 'COLL_CODE' is null
  connect prior 'MAJR_CODE' = 'PARENT '.
  siblings arrested by "MAJR_DESC".
  
  The tree seems to work fine, but I have a little problem. The tree lists the six colleges at my University. When you click on a college to decompress, it shows the different "majors" of the order. By clicking on any of these majors then load of information that major in various parts on the same page that contains the tree. In the tree, Arts & Communication is the first college. If I develop a college, say Liberal Arts and choose a major, say that English journal, Arts and Communication develops as well. The first sheet (Arts & Communication) grows every time that the page is. I don't want to do. The single sheet should be extended is the College that contains the key that I consult.
  
  None of this has meaning to anyone else than me? Any help is greatly appreciated.
  
  Bob

  Hello Bob,

  Give a few static id for the region of the tree, for example tree-reg-static-id (make sure model respective has the substitution for #REGION_STATIC_ID string #)

  And after the code to run when the page load section of your page @ apex.oracle.com

  if ($("#P1_MAJOR").val())
  {
  var firstNodeChild = $("#tree-reg-static-id li:first").find("li#"+$("#P1_MAJOR").val()).size();
  if( firstNodeChild == 0 )
  $("#tree-reg-static-id li:first").removeClass("open").addClass("closed");
  }
  else
  $("#tree-reg-static-id li:first").removeClass("open").addClass("closed");
  

  That should do the trick.

  However, I consider this a BUG!

  Kind regards
  Hari

• Properties-> Flex tree question Applications

  Right-click on the properties of a project, go to flex applications.

  FX3, only branches shown for my project are the ones with the real application (mxml) files

  In Fb4, it shows all my directories in my project and my applications are in the last subdirectory. But because I have 10 other subdirectories and probably more then 10 directories etc, the tree made my scroll bar about 1 1/5. ((1) there is no collapse all close this tree nasty 2) why it collapsed so all branches are closed, but only branches that appear are those with the mxml files does not start? It's super annoying to scroll down, see what application is selected, scroll to the add, then scroll down to select that I have added, and then scroll to the top to set the default value.

  Just start this view with the tree collapsed or expose branches that contain only mxml files.

  This forum is for the SDK. Issues specific to the IDE interface belong to its dedicated forum.

• Property selectedItem tree question

  Hi all

  After setting the dataprovider for the tree, I browsed the dataprovider of the tree and selected a particular tree by using the tree.selectedItem property node. But a problem of stack trace mentioned below during the launch of the tree and execution.

  

  You might want to try a later version of 3.x.  Otherwise, you will need to

  debugging in and see what assumptions does the code.

• Recursive tree question

  Hello!
  
  I made a display with gites SEO link display object, relinquished control of the data on the page, added a rule, selected attributes.
  It works fine, but the tree displays all rows of the tablefirst, because the tree uses a unique view object and query does not limit data because if I limit to select only records of root, children are seen, of course. How to build a recursive tree, while it would initially only the records of root on top?
  
  Thank you!

  Yes, 1 view object can create a tree model. First of all on the data model for the App Module will be one with ViewCriteria and her child, using the ViewLink you defined for himself, without a viewcriteria.

• Node of the tree in default expansion

  Hello
  I have an element in the tree, the first node which remains extended, I can not find the reason for this behavior, can someone tell me how to stop growing.
  Thank you
  
  Published by: aparm on May 9, 2013 04:21

  I think that I had the same problem you describe. Look at this thread:

  The tree question

  Bob

• Edit Tree Control Question, specific cells

  Hello

  I have a question on the modification of tree controls.

  I have played around with the properties and to date have not thought to it. That's what I'm doing:

  I have a tree with multi-column control.

  The columns are essentially: name, Description, value 1 and value 2

  I want to do is be able to select the value 1 and value 2 and change them individually on each line.

  I want to be able to change the name and Description.

  What I was able to do so far is the editable table and every time I get the string in the active cell regardless of the cell that I click in returns always the value of the first column.

  I had this problem by making my changes of value by calling a pop-up box and change the values, but I would rather simplify it by editing the tree.

  I can't give my real code, but if it helps I can make an example facsimile...

  Here's a suggestion:

  -tour of the edition on the tree cell

  -When the clicks double user on a cell, if the column index is 2 or 3 then set the position of the appropriate cell editing

  see this: (in this example, I'm not filtering the column index, but I'm sure that you'll be able to add this feature)

  

• Tree of the University campus solutions 9.0 organization and Lookup Table question

  People,

  Hello. I'm creating 9.0 Solution Campus of a college. I confront the issue as below:

  Implement AWAR > Foundation Table > academic Structure > academic organization

  I implemented the academic organization of these data Table: in addition to academic departments, I also type in academic institutions and academic groups.

  Then I create academic organization tree using the tree Manager. The tree is verified and valid a date of entry into force.

  Then I put in place the 2 tables below:

  Implemented AWAR > Foundation Table > academic Structure > program academic table

  Implemented AWAR > Foundation Table > academic Structure > Table of different disciplines

  Table of research of the academic organization developed in the 2 above table successfully. But when I put in place the other 2 tables below, search for academic organisation table does:

  Implement > AWAR > Security > secure Administration of the student > user ID > Security academic organization

  Curriculum management > Catalogue > Catalogue courses > tab offer

  I understand that the 2 tables above are based on the tree of academic organizations and not on the academic organization Table. I see no error in the tree.

  Because the search for academic organisation table can't happen in the tab 'Offers' course catalogue, the course cannot be saved.

  My question is:

  Any folk can help resolve the issue of the "academic organization lookup table cannot mount security academic organization and in the tab catalog of courses'? Or any suggestion on the tree of the academic organizations?

  Thanks in advance.

  Perform the following procedure:

  Home > ACSS configuration > Security > secure Administration student > process > security update - Acad Orgs

  After the execution of the process, check the lookup tables.

• Tree with action listener node context menu attached to a bean - question

  Hello
  
  I have a tree node that contains a context menu and a popup. The Popup has a group that has a menu with two menu items. Each menu item has a menu-> to a bean that I created-> #{MenuBean.cmi1_action}. The actions are to add a node to the tree, or remove a node. All parts are connected together and work fine.
  
  The question is, how do I get a reference to the data node was selected with the right click to launch the popup?
  
  In addition, from code created as a bean, Java what is the best way to refer to all objects in the user interface?
  
  Ideally, I would like to put the code in the bean to add or remove a node in the tree and then the table that the data in the tree comes.
  
  Thanks Bob
  
  PS, here's the code:
  
  < af:tree id = "t1" value = "#{bindings." Var OrdersView1.treeModel}' = 'node '.
  selectionListener = "#{bindings." RowSelection OrdersView1.treeModel.makeCurrent}"'unique' = >
  < f: facet name = "nodeStamp" >
  < af:group id = "g2" >
  < af:outputText value = "#{node}" id = "ot28" / >
  < / af:group >
  < / f: facet >
  < f: facet name = "contextMenu" >
  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "p1" >
  < af:panelGroupLayout id = "pgl2" >
  < af:menu text = "menu 1" id = 'm2' >
  < af:commandMenuItem text = "add node" id = "cmi1.
  action = "#{MenuBean.cmi1_action}" / >
  < text af:commandMenuItem = "Delete node" id = "cmi2.
  action = "#{MenuBean.cmi2_action}" / >
  < / af:menu >
  < / af:panelGroupLayout >
  < / af:popup >
  < / f: facet >
  < / af:tree >
  
  Here's the BEAN:
  
  Overview;
  
  
  
  public class {MenuAction
  public MenuAction() {}
  }
  
  public String cl4_action() {}
  Add the code in the event here...
  System.out.println ("Menu clicked...");
  Returns a null value.
  }
  
  public String cmi1_action() {}
  Add the code in the event here...
  
  System.out.println ("Menu Clicked.1..");
  Returns a null value.
  }

  The validation operation is available at the level of the data control - so select the data control, you would see the operation.

  Check the screenshot:
  http://adfsampleapplications.googlecode.com/svn/trunk/images/commitoperation.PNG

  Thank you
  Nini

• Simple question about tree

  It is a simple question but I don't seem to be able to solve it, the thing is I have a component of the tree and I don't want any image for icons (by default, they are included), I want to just plain text, so I need to remove the sheet, disclosure and the folder icon that appear in the tree component.
  
  Any ideas on how to do this?
  
  Thank you

  The attached code allows, but does not solve the arrow without removing the possibility to expand the tree.

  Delete the following command to see the arrows (maybe that's what you want):
  disclosureClosedIcon: ClassReference ("classes. EmptyIcon");
  disclosureOpenIcon: ClassReference ("classes. EmptyIcon");

• Question of tree control column - hot/indicator

  Is it possible to have some columns in a tree control will be hot (Edition) and others as indicators (no parameter)?  It seems as if all columns (except the first column "0th") must be all hot or all indicators.  I also looked in the attributes of the cell, and there is no way to make cells either as hot or indicators indiviidual either (like Table controls).

  I noticed that the elements can be mitigated using tho attribute ATTR_CELL_DIMMED, which gives a behavior similar to what I'm looking for (the user cannot change the value of the cell), but also gives the cell a greyed look.  I tried to manually adjust the appearance of the cell back to what I would (IE ATTR_LABEL_TEXT to black), but of course, it didn't have an effect.  Any ideas?  Thank you.

  You can choose the columns and cells you want to change using the tree callback function, if you have a CVI 2009 or later. You can use ATTR_TREE_RUN_STATE and ATTR_TREE_EDITABLECELLS inside the EVENT_LEFT_CLICK (and probably EVENT_LEFT_DOUBLE_CLICK too) to achieve this. I enclose a simple project with a tree that you can edit the first column of a double-click, the 2nd column with a single click and you can not change the data in column 3 at all. You can even specify individual cells make you it editable if that's what you wanted to do.

• Tree order adding order question

  Joined a VI that I simply want to add 6 parents, each with 5 children who have 8 grandchildren to a tree by program control.  It adds them to the tree, but they are scattered, and the order is not obvious for me.  Can someone help me out here?

  The method 'Add end point' for the construction of the tree seems to work for what you want.  The 'Add item indent' is hard wired for parents, children and grandchildren.

  See attached VI

  I hope this helps.

• Table tree select questions

  Hi all

  I use Jdeveloper 12.1.2.0.0.

  My requirement is to select the checkbox all rows in a table from the tree root level when the user clicks a checkbox control named selectAll (this box resides outside the TreeTable). If the user disables the selectAll checkbox all rootLevel in tree lines must be unchecked.

  The tree has two levels. I used a transitional mode attribute in the t and when the user clicks the selectall checkbox, ValueChange Listener fires and I'm looping through the lines of the iterator, setting the transient value to be true.

  It works fine all the time but not the first time. When I click on the for the first time selectAll checkbox, the ValueChange listener fires but the treeTable lines are not get verified. The second time, it works perfectly.

  I have a partial trigger to the TreeTable.

  If I use a button instead of a check, it works fine all the time.

  Could someone help me.

  Do not know what causes this. Have you tried in jdev 12.1.3?

  To work around the problem, you can but a button hidden on the page and the queue an event to actin the listener to change value of the check box for the button. So easy the key dies at work, and it should work.

  Timo

• By script question Patterns - frame photo and tree

  Hello

  I have some problems to use the fill > model > models scripted. What happens is when I open the list of scripted, the two models 'picture frame' and 'Tree' appear disabled.

  Someone knows how to fix this?

  Thanks in advance.

  You need the GPU acceleration for this feature.  Check the thread below and links FAQ

  Re: Frame picture and grey trees

  http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-GPU-FAQ.html