M91p ((modèle 4524) will not sleep)

Similar Questions

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• Maintenance of Windows 8 and will not sleep

  My lenove h505s which is 3 months old has installed windows 8.  Everything has been fine up until about 2 weeks ago it started doing maintenance and this interview will not end.  This seems to be produced at the same time that the computer will not sleep.

  The screen turns off after 10 minutes, but the computer does not turn off and should be 25 minutes.

  I'm sure that the maintenance is now awake and even if you stop the interview, I don't know that because an interview is necessary, stop the sleep of PC.

  I'm afraid this is going to damage that the fan runs all the time when not in service.

  Any advice would be appreciated

  Thank you

  try to optimize the drive options not to defragment the hidden recovery disks (just uncheck the readers which has no drive letter)

  step 1: computer goto-> right click on drive c :-> click Properties

  Tools 2 step tab and in there click on optimize

  step 3 change the settings

  step 4: uncheck the readers who have no drive letter. (most laptops have these drives hidden for recovery and they are not visible in 'computer')

  Much appreciated for these tips!  This was exactly my problem!  Once I configured defrag in c: only automatic maintenance was back he is quick, quick auto...

• Satellite U400 won't turn on & when we will not sleep mode

  I have a Satellite U400 and is a year and a few months.

  In the last few it was in place, and it started when the computer goes to sleep and goes to the black white screen, it will not fall.
  The only way to do anything is held in the power up to what it turns off and then back on. This brings me to the warning screen that I turned off my computer incorrectly. It was actions also for a few weeks and randomly started unexpectedly.

  Then just today it does at all, I was pressing the power button and the key itself would be lit up and on the right side of the small lights would light up but don't turn on, I kept pressing it again and again and again and finally it turn on. Once on, I used only for a few minutes before turning off again and then do the same thing, I kept pressing the bottom until it works. Its been on now and has not extinguished again.

  There not in the newspaper I had to reformat my computer because I forget my password and had put me out of the computer. About a week after that is when the problems started. I'm not all that clever computer, to be honest, I do not understand something of things, I can follow step by step to do something.

  I really want to pay to have it fix I just want myself and as soon as its in great shape and never had any problems before.

  Does anyone have any idea what this might be, or why it might be?

  I think about reformatting again because I'm worried that didn't work right the 1st time or something.

  Or if it's something that needs fixing someone have any idea on the cost of it?

  Thanks ^_^

  Hi aev270,
  sounds like a serious problem for me.
  Try the following: take out the battery, cd-rom, hard disk, and then try again.
  If it starts without this items - you lucky!
  This means that it is probably a software problem (but I think not - sorry)
  you see the toshiba logo / messages from the bios? No - the you're in trouble.
  This strange behavior may depend on many things: defektive components such as ram, grafics... nor (badest) motherboard...
  If you have still warranty on this subject, you should go to a having servicepartner check installation.

• El Capitan woes. Safe mode, test hardware will not work. Restart the loop, kernal panic. Any sugguestions?

  I have a MacBook Pro 13 "2011 start. He had some OS X Lion when buying.

  Two years later I upgraded to OSX Mavericks.

  
  Less than a week ago, I did an installation CLEAN of El Capitan. Wiped my HD and installed in El Capitan. I did it with a bootable USB key. The installation went well. Throughout these years, I have drive repair/check, repair disk permissions when necessary. I have a 500 gb HDD installed, and I kept it about 200 GB of free most of the time. Before and after the installation of the El Capitan, disk utility has repeatedly demonstrated the hard drive in good condition.

  Last night, I wake my computer from sleep mode, it seemed to be frozen.

  Some applications still running - Google Chrome, VLC.

  Mouse still worked. Any click of mouse or track to effect not anything on the screen.

  I pressed Command-Option-Esc force quit and stop chrome by there for.

  Then I rebooted, went to the screen toolbar and progress apple, but then hung on a blank grey screen for about 7 minutes.

  I stopped him. I disconnected all devices.

  I restarted now down option, same result

  I restarted now pressed D, same result.

  I have reset the NVRAM and MSC with the same result.

  I restarted again and realized account of the progress bar was actually progressing just at an incredibly slow pace. So, I waited, and finally made it back to the login screen. IM speaking 20 minutes more.

  Once I finally got on the desktop - I did another disk check and he said everything was fine with my hard drive.

  I checked the activity monitor and shows nothing cluttering of CPU or memory.

  I emptied the login items (System Preferences > users and accounts > login items) that could be the cause of it.

  I would like to have checked permissions of the drive although I doubt it would have helped, but it seems that El Capitan does not provide this feature in disk utility more?

  I then tried the same thing - restart + hold down D to see if I could launch a kind of diagnosis, something! It remains just started up new connection, but it bit more quickly this time.

  I thought I was clear, but after reboot once more he would go in apple logo/progress bar and then show a weird code on top and then directly to the message ' your computer restarted because of a problem, press any key or wait to continue to '... etc. in various languages. The computer begins to restart once again to do the same.

  I turned it off then reset the PRAM, SMC again.

  I rebooted into recovery mode to check my HARD drive. Well, now for the first time, he tells me theres something wrong with my drive and cannot be resolved. I find it so weird because it worked very well on the Mavericks and Lion for years. I have never had problems - start the system or hard drive related.

  Well it finally helped me get to Apple Hardware Test. Click on "test" and everything seemed to go well up to the mark of 2 min 0 s, thin progress bar froze, trackpad would work, but the mouse would be insensitive by seconds. IM guess that it is a hardware or a disk hard question then? Player's fault? Do not know how to install El Capitan would casue those things...

  If I get a new drive and start all over again, I'll be able to reinstall my programs purchased in the app store? The only thing I have right now is Logic Pro. On a PC right now and not can't find anyway to see my purchase history. Checked apple.com and shows no purchase for 90 days, so I guess I need to check through to iTunes or the mac app store for really?

  Thanks for reading and any help is greatly appreciated.

  App store apps are linked to your Apple ID.  Change the HARD drive will not affect your ability to access these applications.

  It sounds that a new HARD disk is in order.

  Ciao.

• ST2410 will not 'sleep' with HDMI

  I noticed a few other people in product reviews also mention this problem but I can't find that someone posted a fix. When my Dell ST2410 monitor is connected to my video through the HDMI connector card it will not completely sleep when the fact of the computer. The small "No. HDMI Detected" warning box (in color) floats around the screen as a screen saver. What's up with that? I have not tried VGA but when connected with the DVI cable, unless it goes into power save and "standby" mode fail. What's up with that? Anyone?

  Thank you! nyteshade!

  Hi Chris,

  I'm glad you guys are here. I had the same problem, or you can a little more weird and resolved after seeing the solution in this thread.

  I have 2 Dell ST2320L numbers, purchased in Dec 2010 and the other in March 2013. I liked the first one so much I couldn't even thought to update when I had to buy another :)

  The problem appeared with the first when then we came. Actually the first was attached to my PC all the time with DVI and I had no problem. Then I thought set up a small TV in my room and got the DTH HD connected to ST2320L so that audio connected directly from monitor with less clutter, so you do not get a TV of this resolution at this price (prove me wrong), and I was still using only the HDMI speakers and external, so that's all I needed.

  It's so fascinating that I removed the motherboard audio and used from PC monitor as well (less), of course, I had to connect to HDMI instead of DVI that I used. And, from there, I got the big don't flutter problem "NO cable HDMI atatched" whenever my screen was supposed to go off (I have it also down 2 minutes, I work from home and let the PC all the time, so this would save energy). HDMI was provided by Dell only with an Inspiron notebook. Then I saw this thread and tried the one provided by the DTH provider and it worked like charm.

  So here's the 2 cables one who worked and which did not.

  Did NOT work (Supplied with the laptop Dell Inspiron)
  Byte E119932-T * BHC78PE of 2 METRES of CABLE AWM STYLE 20276 80^oC 30V VW-1 HDMI1.3

  Worked (Supplied with the box of DTH)
  High speed HDMI^TM cable AVLV2 AWM STYLE 20276 80^oC 30V VW-1 ProgTech

  Note that, by "worked", I hear only the day before. The two cables carried the video and Audio without any problem, the difference was that the sleep mode is detected incorrectly as the cable is disconnected. Who noted quite rightly by Chris.

  I hope this helps for other readers. Your monitor has no problem, it's just your cable. Try the one above the HDMI1.4 (High Speed HDMI) and not HDMI1.3. I guess this has nothing to do with the quality provided by my DTH provider is pretty cheap looking and thin while one that came with Dell Inspiron is award-winning very looking, thick, soft, long, and with connectors Golden which melt in 2 or 3 years.

  Thank you!

• PC will not sleep

  I had my laptop Lenovo G550 for over 3.5 years and just started having problems with the mode 'sleep'.  When I try to put the PC in "sleep" just, even after several minutes of waiting.  Recent installations include cloudberry backup online and free antivirus Bitdefender.

  Can someone identify this problem and propose a solution?

  Thank you.

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I did a system restore to recover an uninstalled program and now my computer will not sleep.

  I tried to fix it when you restart the computer, and that doesn't seem to work. Running out of ideas! Help, please!

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Windows 8.1 will not sleep and error when restarting - DRIVING ME INSANE

  Hi guys,.

  Since the upgrade to Windows 8.1, my laptop never sleeps, now I updated the graphics drivers and it seemed to solve the problem but now it's back to not sleep well again and then just restarts my laptop and take 20 seconds or more to start again.

  When I wake my laptop Inspiron 15R SE 7520 after hibernation an error message with the blue screen "" thread_stuck_in_device_driver".

  All the drivers are updated according to Device Manager. I also left the HOMEGROUP.

  I just have no idea how to solve this problem and I just tired to try since the upgrade to windows 8.1! With windows 8, he wakes up from his sleep in 1/2 seconds... now nothing!

   

  Thank you

  Ravi

   

   

  Hi guys... good new

  I just managed to find myself a solution at LAST! : D (to do with 7730 graphic M AMD Radeon driver...

  I did a little digging around the internet and found this link:

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19477777.aspx

  that seemed to solve my problem!

  I only downloaded this link below and without having to reinstall what she just did everything for me by using site Catalyst Display Driver/software AMD.

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64

  My laptop now sleeps in the 2 to 5 seconds and boots to the top in the second now: D.

  I have Intel Graphics HD 4000 and AMD Radeon HD M 7730 installed on my Dell 7520 15R SE.

   

  It cannot help EVERYONE, but hey it's worth a try.

   

• Windows will not sleep with the attached USB

  I have two computers, a Windows 7 and XP, which have USB drives connected, and they are set to turn out to fall asleep after two hours of no activity but do not sleep when I am away. There was nothing running, no keyboard/mouse input. Is there a way to fix what is happening? Readers USB prevent sleep?

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  It seems that the power settings are not correct.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Disable the ability of the USB device to wake the computer and check. To do this, please follow these steps:

  a. Click Start, right-click computer and then click on 'manage '.

  b. in the user account control dialog box, click "continue".

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. click on Device Manager, expand USB, right click on the device bus controllers and then click

  Properties.

  d. click the "Power management" tab and clear the checkbox "Allow this device to wake the computer" and then click ok.

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Additional information:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
   
   
  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• iPod Touch generation 5 will not 'sleep' mode

  Anyone having problems with the last iOS 9.3.5 where your iPod Touch in WITHOUT entering the mode 'sleep'?  The battery on my iPod Touch is draining that if she is constantly the same after pressing the button stop/market/sleep.  My battery down to almost 0% and I have to force a reboot (hold Home and on/Off/sleep button together for 10 sec) is to wake up when connecting to the iTunes.  Anyone have any idea how to force the iPod mode 'sleep'?

  The iPod's sleep if you do not have "SLIDE TO POWER OFF" and the screen is empty, except that you can play audio with white screen.

  Your iPod to sleep is based on the definition of sleep?

  When he sleeps depending on the settings you have defined, the iPid can do things in his sleep like audit and udating apps, mail

• My computer will not 'sleep' mode

  Original title: standby mode

  the computer doesent goes mode sleep by himself

  the computer doesent goes mode sleep by himself

  Solve the problem of sleep mode
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  The problems of wake the computer from sleep mode
  http://support.Microsoft.com/kb/266283

  ............................................................................................
  In addition to the tutorials above, see if the following can help:

  Start > in the search box, type power options > press the Enter key > right side, click on change Plan settings > change advanced power settings > scroll multimedia settings, expand (click the plus sign +) > extend when media sharing > on BOTH on battery and Plugged IN, set it to Allow computer standby > OK
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• ProBook 450 G0: 10 Windows will not sleep or Hibernate or start properly

  Hello!

  Hello!

  Recently I did a clean install of windows 10 and I have a problem I forgot my past experience with this version of windows: my system is unable to go to sleep (or he can't wake mode 'sleep') or Hibernate.

  Example of situation: I put the system to sleep, it shuts down (the power button blinks always - it's what he does when the laptop is in sleep mode) and when I press the power button (or click on my mouse) system does not. Either he starts as a fresh start (as no "sleep mode" has never been there) or the screen goes black, stay like that for a while and then stops (and, of course, when I open it again it is like a new beginning).
  I never met such a problem on all other versions of windows. I did almost (if not all) of the suggestions and tutorials on the internet about it. The BIOS is up to date, so is my driver chipset with the rest of my drivers. Is it possible to fix this? It's the only thing that will make me return to windows 7.

  HP ProBook 450 G0 with:

  Intel Core i7-3632QM

  Graphics Intel HD 4000 / AMD Radeon HD 8600 / 8700M

  8 GB RAM

  SSD 240 GB KINGSTON SV300

  PS: I found this link where I discovered that the decommissioning of the bios to an older version would work, but I can't find versions older for my laptop.

  I have not upgraded to Windows 7 to 10. I did a clean install and I manually installed the drivers for the AMD and Intel video hardware.

  I found how to solve this problem by making this upgrade of repair: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-perform-a-repair-upgrade-using-the-windows/35160fbe-9352-4e70-9887-f40096ec3085
  Someone who has the same problem, I had perhaps try this method, as any other internet method did not work for me.

  Thanks anyway for your answer!

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• T61 with Win 7 RTM will not sleep on the current, will sleep on battery

  You wanted to start a new thread on this since the similar to the previous thread presents the beta version of Windows 7 and other issues while I and at least one other people have this same problem with Win 7 RTM.

  My T61 (8891-CTO) won't go to sleep / suspend when it is plugged into the current running Win 7 RTM and the current drivers Win 7 Beta.   It will be put into hibernation on current alternative.  He'll sleep / suspend very well when it's on battery.

  When the current alternative, the display dims when I try to sleep, but it will never actually suspend.   Move the rear mouse lights up the screen and gives the Windows login screen.

  Like everything else works very well and sleep works on battery but not AC, I have to assume that it is a driver problem.

  Any help appreciated.

  Thank you

  Michael

  I realized what was causing the problem on my system, so maybe this will help someone else.

  The Windows Media Player Network Sharing Service prevented my T61 to sleep.  I stopped and disabled this service.  Sleep works fine now.