Updates on the Cache, search, Mobile compatibility, and creation of Cluster for EM

Similar Questions

• How can I check customers get updates from the caching Service?

  I've just set up a server 10.11 with Server.app version 5.0.15 to act as a provisioning server caching to provide updates to the clients Mac (no iOS device).

  I see that he has downloaded updates the Stats section when I chose bytes served in the drop down menu.

  I want to check that it works and that clients receive the updates of this sever when at the office.

  I did a lot of research but have not found anything definitive. I've seen suggestions may be looking at the Library/Server/Caching/Logs/Debug.log, but nothing in it can tell me whether or not a customer received an update of the caching Service. It is suggested in the Server Essentials of PeachPit book looking at Activity Monitor to check the packet network and instrumental, but which shows that the server successfully contacted Apple and checked the IP address.

  I need to know and to verify that this Service of caching works effectively by updates provided to customers on our network. Does anyone know how to do this?

  Thanks in advance.

  EDIT: I just checked the server again and downloaded only 226 MB of data. I created this yesterday afternoon. Shouldn't be much more data?

  https://help.Apple.com/ServerApp/Mac/5.0/?lang=en#/apd5E1AD52E-012B-4A41-8F21-8e 9EDA56583ALog

  LogLevel-> verbose
  I get enough information about the activities

• How to disable the automatic updates?  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will not be able to work bet

  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will be not able to do work between school and home

  You can install older versions if you use an older version.  but the newer versions (for example, cc 2015) can always post files to open in cc.

  If you want to save a file for cs6 install cs6 at home.

• helpp... I can't find the driver ATi Mobility Radeon HD 6470 1 GB for G4-1003TX?

  Help find the Driver ATi Mobility Radeon HD 6470 1 GB for Pavilion G4-1003tx pleasee! Why I can't find in the HP ATi Mobility Radeon HD 6470 support 1 GB, it's really disspointed for user HP!

  I read in several places so many people disspointed on the ATi Mobility Radeon HD 6470 1 GB for g4-1003tx research. Why in the HP support is not ready for this driver ATi Mobility Radeon HD 6470 1 GB?

  Pleasee help me solve this problem immediately so that I can use my laptop! for now, I can't use my phone because I can't find the driver ATi Mobility Radeon HD 6470 1 GB! THX

  Hello

  The driver you need is on the link here.

  Kind regards

  DP - K

• Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes & Icannot resize these elements by dragging the nodes.  I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it aga

  Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes & Icannot resize these elements by dragging the nodes.  I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it again on the right.

  View > Show bounding solve?

• Windows Update page does not load, another updater with "update" in the url does not work, and the microsoft Download Center will not download. Help!

  Right. I read the other posts and do not know if it's the same or not, but...

  Update Windows page fails to load - no error message
  antivirus and another updater with update in the URL cannot purely and simply, or don't load - no error message
  any attempt to download anything from microsoft download site fails to load - no error message

  I got stardock, not my colors, uninstalled

  same result.

  any ideas?

  CLM-NSWG4,
  It seems to me that you can have to deal with a virus\malware infection.  You can watch these threads discuss virus problems and see if you are able to detect problems, that I suggest you use an online scanner (if you are able to) and scan your system.

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Windows Live OneCare Safety Scanner Windows XP

  Get rid of malware

  Can I clean an already infected computer?

  If you need more help then read: what to post in the Windows Update forum
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to dynamically set the width of the bitmap as mobile size and adjust accordingly the photo.

  I have the bitmap image. Now, I want the bitmap to the screen but its size should be as mobile width and adjust the picture accordingly. For the former I enlarge it should look like small small mobile screen.

  My code but its not working.

  public static BitmapField getHeader() throws NullPointerException {}
  Bitmap b = Bitmap.getBitmapResource("img/logo.jpg");
  return (new BitmapField (b, Field.FIELD_HCENTER) {})
  Protected Sub layout (int width, int height) {}
  setExtent (365, 80);
  }
  });
  }

  You will need to put the image yourself to match the dimensions you need.

  Watch Bitmap.scaleInto)

  If you have transparent images, then watch this:

  http://supportforums.BlackBerry.com/T5/Java-development/resizing-transparent-bitmaps/Ta-p/703239

• disabled components will not update via the code on 4.6 and beyond

  Hello

  I have a BlackBerry product which is usually done by the visitors on a device running OS 4.5. At some point in the application, a screen is locked so that no component can be updated by the user while the application waits for a response from the server process. Once a response is received, the application retrieves a value of response burden and updates one of the editable fields progammatically (but it is still not editable by the user).

  It worked on 4.5 as I have said, but a customer tried this on a device using 4.6 and the field is is more updated. I don't know if the fact you can update a field by programming even when the field was not editable was originally a bug that has been fixed at 4.6 or if there is another way to achieve this.

  My current thinking on this is to temporarily mark the element as editable after receiving a response from the server, update the field, then turn it off again. It smells really bad and I wonder if there is a better way to approach this problem. Any thoughts?

  I don't think the editable flag has any influence on changes programmatically, in other words, you can together make a "setText" on fields that are not editable.

  I would look first for a change in the treatment of communication which means that the field is NOT updated due to other errors.

• Table did not get updated in the custom search page

  Hi friends,

  I've designed a personalized search page. Are the steps that I followed exactly as described in the below

  http://www.awasthiashish.com/2013/07/implementing-custom-search-form-in-ADF.html

  The table displays all records in the first place. After that the search criteria is entered and you press the ongoing search for the table shows all records. Is there a setting that is missing and not in the article.

  Thank you

  Hello

  have applied the criteria to the viewObject at the level of the application module?

  also check sample application, it works on your machine?

  Thank you

• Just updated through the creative application of cloud and now lightroom will not load again.

  As the title suggests:

  I've just updated creative cloud app, run lightroom from the standard m desktop shortcut and got 5.7. You who quit and tried to run the shortcut again. No charge.

  Thought it might do with still some 5.7 installed, uninstalled as well as through cloud creative app and it still don't load. Noticed that the creative application cloud still showed as being installed lightroom (5.7 has disappeared the first uninstall). Choose uninstall again and this time she went from the installation of the application to be an option to install section.

  Installed new version and it will not load.

  Could someone please advise how to solve this problem I would like to be able to access my files and the changes that I made.

  Thanks in advance,
  Matt

  Moderator:

  Note please. The solution posted to sign and to the creative cloud app seems to have worked

  I saw that before writing this post.

• See update of the form-based forms 6i and 10g.

  Hi all
  
  I am facing a strange problem.
  
  I created a form based on a view that is based on a single table. I made a copy of the form and converted in 10g.
  
  When running in 6i, I can update the data through forms. But in 10g, its display FRM-40602: cannot insert or update data in a view.
  
  Can someone tell what is the problem?
  
  
  Thank you and best regards,
  
  Manu.

  Just for a control:

  What happens if you assign the uneditable "Kry" mode and mark the PK-item as a"main key"?

• What is the difference between pls_integer index and index of directory for a collection?

  Hi all

  I have a bit of difficulty understanding the difference between pls_integer and directory when you declare a collection...

  Is not so much pls_integer than the supposed to be the same in 10g and 11g?

  My problem is that I've declared a collection in a procedure with directory and by record type, it takes 10 seconds to process. (IE TYPE test_table IS the TABLE OF test % rowtype directory INDEX ;))

  However, the same procedure with the declared collection with index of pls_integer, take only 1 second to process. (IE TYPE test_table IS the TABLE OF test % rowtype INDEX BY PLS_INTEGER ;))

  Any help would be welcome.

  Thank you.

  MichaelR wrote:

  I don't understand when say you not to use DML in a LOOP and use sql only. Can you please give me an example?

  I usually of code like this:

  1. I'm looped slider
  2. Update table_name
  3. the value of col1 = i.rec1
  4. where col2 = i.rec2;
  5. end loop;

  This approach is incorrect.

  All SQL is parsed and executed as SQL cursors. There is no such thing as use SQL or cursor.

  A cursor is a "compiled SQL program. Source SQL that has been analyzed in a cursor executable code. When you retrieve the cursor, you push the button the cursor or program execution. It finds a row and return lines. He's on a break. You get the rows returned, these processes and then click the button run the cursor using fetch. Until the cursor/program finds no additional data (or he faces a snapshot too old for example, where it can not rebuild a coherent reading to find the next set of lines).

  A cursor is and has never been a set of cached data in memory that you are recovering from.

  Take a look at your code. You use a slider/program to retrieve data from the database. For each row in the cursor returned, you call another slider/program and pass this line as input data.

  It's slow. Data line moves a cursor to your PL/SQL code, and then again from your PL/SQL code to another cursor.

  A single slider that makes the reading (the SELECTION cursor) part and the part of writing (the slider to UPDATE), requires no PL/SQL to read and write the parts together.

  How to write this unique SQL cursor? You can use:

  UPDATE (SELECT... Of... JOIN THE... WHERE...) SET...

  You can use the MERGE statement. Or maybe just a statement UPDATE simple vanilla.

  What is the problem of a conceptual, performance and scalability point of view, is the approach that you have indicated above. That approach will ALWAYS be slower than just SQL. This approach cannot scale.

  The mantra of performance for Oracle is simple: Maximise SQL . Minimize the PL/SQL.

  Use the SQL language correctly and properly. Do not what SQL is designed to do, in PL/SQL.

• After updating Firefox, the font on my screen size has been reduced for all applications. How can I increase the size of the font on my screen?

  After the update, the next screen shows all the letters in smaller characters, with fewer pixels. All screens are like that now, and I found nothing in Firefox Help content. It is a problem because I have vision problems. So, how can I increase the font size that had it before? My screen is approximately 20 inches wide.

     Also, any chance I can change all the font to Arial instead of Times New Roman?
  

  Hi shbuzz2001,

  Have you tried to increase the amount of zoom by pressing on CTRL and + a few times? This article will show you how to use the Zoom.

  You can also check out the Knowledge Base article on the accessibility in Firefox - make Firefox and work of content for all users. It deals with default fonts and other options that may interest you.

  Hope this helps!

• Connection of the PXI-4071 - can sound and LOs remain interconnected for the impedance of the cable 2, voltage DC/AC, frequency and waveform acquisition?

  Hello

  We use the DMM and SMU-6363 map to test a hardware device.  We will also use a PXI-2530 b switching matrix.  We will use the digital multimeter to perform the measurements of voltage, DC and AC, measurements of impedance (2-wire and 4-wire), frequency and waveform acquisition.  Can the PXI-4071 left be 4 wire connected (black jacks taken connected and red connected) mode and still be used to perform all other measures (including 2 impedance of the cable).  This would simplify the switch connections.

  Current measures use the son + and LO, but the HI and S-can remain connected.  The problem you are having is if you have an active device the digital multimeter and take you a 4-wire resistance and the measurement of voltage with all 4 wires connected and then change to a current... When you do this, short-circuit you the terminals of the DUT, on that you just take the measurement of the resistance.  If the terminal HAD, say, a power supply 10V, then you have just shorted out.  Of course, this isn't a problem if your Instrument is a passive device, or if you change just the unused two lead whenever there is an active device of low impedance.

  If you want to make voltage, current and 4-wire resistance, you need all 4 wires.  If you want to do the voltage and current, you will need 3 wires, but you could connect the s + Hi and then just do the two wires.  I vote running every 4 son to your DUT for maximum flexibility.

  2-wire resistance is a must if you are measuring resistance above 10 MOhm.  Alternatively, you can use 4-wire for all measures.

• Each update of the Mac App Store downloads and installs twice

  When I hit "update" for an application on the Mac App Store, it downloads, installs and continues to show an update. I hit "update" again, let it download and install once more. Even after waiting a few minutes in between.

  It seems that when I click on "update all", apps always download and install both times, but automatically, without having to double click me. It is even clearer that this behavior occurs when one of the applications is open, I get the warning twice as much as the application runs.

  This has been going on during some time, perhaps at the time of the update to El Capitan.

  None of these applications are installed in several locations on my Mac.

  I tried the advice of following Linc on this thread and delete/var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068, but it did not help.

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  1. open a search window by pressing the command-F key combination in the Finder. Select the Mac as the scope of research and the research of the app (s) in question by name. Delete all obsolete or duplicate copies that you find.

  2. If the search results appear to be inaccurate, rebuild the Spotlight index. If you try to search now, there will be an indication that the indexing is in progress.

  3. triple - click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.appstore

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the trash. Restart the application and test.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  4. If the previous steps do not resolve the problem, leave each app in question and uninstall it by following the instructions on this page. Alternatively, you can drag it into the Applications to the trash and empty folder. You have created the data files will be preserved. In Spotlight, check that there is now no copy of the application on your system. Download your purchase history in the App Store.