Updates to the approach of the Assebler Interface

Similar Questions

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.

  

• planning sparse dimension update via the ODI interface does not

  I'm trying to update planning spare dimension (Department) by changing the property of storage of data from' never' to 'Store' through the ODI interface.
  
  Even if the ODI interface for this update runs successfully without reported errors in the data storage property 'Operator' is still showing as "Never share" in planning and Essbase (and yes I select the option "Refresh database" of IKM = Yes (IKM SQL for Hyperion Planning))
  
  
  Someone knows something similar or ideas if Miss me something.
  
  BEST!
  
  Published by: 867760 on March 26, 2013 21:41

  867760 wrote:
  com.hyperion.odi.planning.ODIPlanningException: java.lang.RuntimeException: com.hyperion.planning.olap.EssbaseException: object %s is already locked by the user %s (1053010)
  at com.hyperion.odi.planning.wrapper.PlanningWrapper.runCubeRefresh (unknown Source)

  First update of the planning to essbase is slightest mistake out because it seems you may have locked contour.
  Also check the error log contained the revenge to see if there is no rejection.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How knowledge uninstalled the update via the API INTERFACE?

  Hello

  I want to know, how do I find information on uninstalled update api interface?
  There are an interface called 'IUpdateHistoryEntry' which has properties of 'Operation', but what I see is, even if I install an update and then uninstall this update, history interface returns only '1 day' with 'install' enum value.
  Appreciate the help.
  Thank you
  Aurélien

  Hi chat2amrat,

  Your question of Windows vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question to the MSDN Windows vista forum.

  http://social.msdn.Microsoft.com/forums/en/windowsgeneraldevelopmentissues/threads

• update in the user interface options

  Hi people jdev.,.
  
  here use jdev11.1.1.5.0 adfbc.
  
  I got af: table in my user interface.
  
  He had a few createinsert, commit, the delete operation.
  
  what I need?
  
  I want an update operation (button) in my user interface.
  
  in order to update existing records.
  
  How can I make it.

  Looks like you just need to change the label of your validation button "Update".

• Need help with this code to update the user interface example

  I'm triying to understand the differences between the three methods to manage UI interactions.
  I'm really confused with these three terms when triying them figure out in a real case.
  Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
  This exception: java.lang.illegalStateException: engine access UI without holding the lock on the event

  The code below illustrates the function of the invokeAndWait method, but if I replace it with
  invokeLater or getEventLock() the program will work exactly the same way.
  Could you please change the code to show the differences between the three
  methods of updating the user interface?

  / public final class HelloWorldMainScreen extends form {}

  private LabelField labelField;
  public HelloWorldMainScreen() {}
  labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

  {} public void appendLabelText (String text)
  labelField.setText(labelField.getText()+"\n"+text);
  }

  }

  SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
  HelloWorldMainScreen screen;

  public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
  this.mainScreen = screen;
  }

  public void run() {}
  for (int i = 0; i)< 10;="" i++)="">
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException ex) {};
  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
  public void run() {}
  mainScreen.appendLabelText ("Update");
  }
  });

  }
  }
  }

  These three concepts are very confusing for a lot from people so all explanatory source code
  describing their functions will be highly useful for everyone, I think.

  Thanks in advance!

  With respect to the effect, there is no difference between methods.  The difference is the way in which the result is achieved.  So we can't change the code to show you the difference.

  As we are unable to demonstrate the difference, you have to do with an explanation.  To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

  If the three options are differentiated by the processing order:

  (a) invokeLater executes the update on the thread of events.  The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.

  (b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code.  But any code after the invokeAndWait will not be executed.

  (c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code.  The difference is that the code to run on the event Thread is not executed before code in the synchronized block.

  If this is meaningless, so that probably does not matter too much.  in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing.  If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.

• Update of the indicators of the façade is trolling in the test of the functions in the provider DLL

  I'm looking to see if someone can explain a behavior to display weird LabVIEW I see when to test some timeout works in a third party DLL. I have a work around in place but I would still like to know why, without the workaround, the information displayed by the indicators on the front panel are not synchronized with what is happening in the execution of the VI, even though I tried all sorts of things to impose the synchronization. Note that to run the VI in a useful way, you need to be able to communicate with a Galil axes via an Ethernet controller, and which, for the most part, limited this discussion to what the experts among you know happen under the hood of LabVIEW in situations like this.

  This is what looks like the VI when my work around (false wait added) is active. It's a small state machine that uses the elements of the array "Test Sequence" to tell him what to do in each step of its implementation. Here he plays a first time-out value, sets a new value of timeout, reading again, the timeout by asking a READING of the controller (without having first asked to say anything), followed by restoring the initial time-out and then tests to stop.  The two indicators in the red rectangle are there to show the current status of the execution, and it is this pair of indicators which are not synchronized with the State of the actual program.

  

  When execution completes, it is what we see.

  

  If the false timeout is too short, then the indicators are not synchronized with the State of the program, or in this case, with the other.  Note that the only time wherever the VI display is static enough for me to take a screenshot as it is during the period of "Test Timeout. When the time-out occurs Finally, things be synchronized and the same results are displayed.

  

  Here's the code.  I am also attaching a folder zipped with the code, just because I don't know if the extracts are smart enough to include all the dll referenced by library call nodes.

  

  Here on the left of the loop indicator 'State' and 'Index' terminals can be seen. The 'fake Wait' needed to make the indicators work synchronously appears below in the same area. Before coming with this 'fix' things I've tried, what has not worked, were:

  • addition of the structure of flat sequence seen here with the indicators in the first panel
  • Entrance to the 'value' property nodes using linked to two indicators with their outputs error Garland at the entrance of the error on the function 'G Read' (test timeout).
  • defining indicators for "synchronous display" (apparently this parameter actually only works with the multi-threaded code, which I don't believe it is)
  • setting false property to "postpone updates on the front panel.

  Another thing that worked linked a "probe" to any data path entrance side of the conditional structure. I thought that it causes also a few milliseconds of delay as the expectation.

  My best guess at what happens is that display updates are "launch and forget" actions that occur on parallel execution paths in the single execution thread and function on obtaining some of the main process to complete time slices. But when the main process is the name of an external library, which, outside the library can't share time with all other processes that can run in the same thread.  All this makes sense?

  This is because all these CFLN calls to the dll are set to run in the UI thread (to view the color orange on the top of the node).

  If they eat the cycles in the UI thread, they may not leave enough cycles to LabVIEW to make updates to the user interface of the front panel.

  What make these 3 part of the dll?  They need to run in the UI thread?  Is there a problem with the standby so that the DLLs are not pounding the UI thread?

• AS3 SWF is not updated to the variables through javascript

  Do not find this one: I have a C4 project with 2 slides.  First slide has a button that executes a Javascript call:

  SetStringVariable("myVar");
  

  Where myVar is an internal variable of the user of C4 with a default value of "Hello World".

  The second slide a myVar is displayed in a text caption.

  I publish the SWF (AS3) and add this javascript function in the .htm file:

  function SetStringVariable(n)
  {
       document.getElementById('Captivate').SetVariable(n, "I set my variable!");
       alert("my var: " + document.getElementById('Captivate').GetVariable(n));
       
  }
  

  When you run the project on the web, the alert comes up with 'I put my variable!', but the legend of slide 2 still says 'Hello World '.  Not sure why this happens since I just did a round trip with the variable.  It is as if the C4 assigns the variable behind the scenes, but is not updated in the user interface.  This will not occur if the C4 project is published in AS2.

  All this experience?  No work around?  I would like to be able to use the SetVariable function in AS3 projects.

  TIA,

  Jim Leichliter

  Sweet - I think I need this thing... :-)  Thank you!

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• finish by updating the user interface...

  IM create screen with pagination... Load button to add more data, it is normal on os 6 and 7 os... but in the os 5 process completed... I haved create to update the user interface of the thread to invoke later...
  This is my code to call later:

  UiApplication.getUiApplication().invokeLater(
                                  new Runnable() {
                                      public void run() {
                                          // delete(hfmLoad);
                                          for (int i = 0; i < comp.length(); i++) {
                                              lowerScreen.add(list[i]);
                                              HorizontalFieldManager hfmBut = new HorizontalFieldManager(
                                                      Field.FIELD_RIGHT);
                                              hfmBut.setMargin(0, 5, 0, 0);
  
                                              hfmBut.add(but1[i]);
                                              lowerScreen.add(hfmBut);
  
                                              spasi = new SeparatorField() {
                                                  protected void paint(Graphics g) {
                                                      g.setColor(Color.GRAY);
                                                      int currentStipple = g
                                                              .getStipple();
  
                                                      try {
                                                          g
                                                                  .setStipple(0xAAAAAAAA); // Dotted
  
                                                          super.paint(g);
  
                                                      } finally {
  
                                                          g
                                                                  .setStipple(currentStipple);
                                                      }
                                                  }
                                              };
                                              spasi.setMargin(0, 5, 5, 5);
                                              lowerScreen.add(spasi);
                                              invalidate();
                                              //lowerScreen.add(new LabelField("Semangat",Field.FOCUSABLE));
                                          }
  
                                          hfmLoad
                                          .replace(_ourAnimation2, loadBut);
                                          invalidate();
  
                                      }
  

  any solution?

  None of the invalidate() method calls are needed in this code.

  For efficiency rather than to add the field individually, I recommend that you use the addAll method.  In your loop, create an array of fields to add, and then use addAll to add table.

  If you do these two things I think that your problem will be solved.

  But if not, can you please tell us exactly what are the messages you see when the process is complete.

• How can I update the user interface controls in the UI thread

  Hi all

  I want to do a custom image to display this URL source support.

  I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:

  ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
  ApplicationPrivate::resourceManager: A user interface thread named method

  It's my code segment:

  class URLImageView: public CustomControl, public QThread
  {
  public:
      URLImageView();
  private:
      void run();
  
      ImageView* mImageView;
      Container* mRootContainer;
  };
  
  URLImageView::URLImageView()
  {
      mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100);
      mImageView = ImageView::create().image(QUrl("asset:///button.png"));
  
      mRootContainer->add(mImageView);
      setRoot(mRootContainer);
      start();
  }
  
  void URLImageView::run()
  {
      //get data from network
      //...
      //...
              //create image from binary data        Image* image = new Image(pixelBuffer);
      mImageView->setImage(image);
  }
  

  I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:

  synchronized (Application.getEventLock())
  {
          // I can update UI control here
  }
  

  Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?

  Thank you
  

  This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.

• need the location and update the user interface in each a second

  you will need to update the user interface by every second so that my application will not hold?

  What is the best way to implement?

  (in the PPH), it should look like this:
  void locationUpdate (long latitude, longitude long);

• Passage of thanks VM SATA drives? (update: a bug in the user interface web host)

  I use ESXi 6.0 for private home use and am currently building a NAS with him (on top of ESXi OpenMediaVault). However, as I am using only material quality consumer, my SATA controller does normally not for raw device mapping. I added the raw device manually in accordance with VMware KB: Raw Device Mapping for the local storage but when I try to join the top device (via the file on the local data store) a virtual machine, the user interface gives me an error message indicating that the capacity is too large for the given data store (of course, the system disk is much smaller than the data disks).

  Is there a way I can still add raw devices to virtual machines?

  Another update: upgrading the client to the web user interface host to 3731936 seems to fix this problem. I can now add virtual disks as RDMs in the web client.

• I don't see the tabs interface options after you install the 2015.006.30119 update. My installation is corrupt?

  I have Windows 7 Enterprise x 64 on my computer to work with Adobe Acrobat Standard DC (classic). I just had our IT Department install the update 2015.006.30119 to be able to use the announced features (tabbed interface). It shows that the currently installed version is 2015.006.30119 in the window 'about' and in programs and features in Control Panel, but the General Preferences tab shows no options on the new interface options to tabs. I inserted the images of the two opinions 'about' showing the version number and the General Preferences tab. While I am not too concerned about a feature that I've never had before, it would be useful in some located to try and it worries me that installation is corrupt if the new features added by this version supposedly aren't really there. I also tried re - apply the update and run the utility to repair facility. Any help would be appreciated.

  

  

  The classic yarn (bought) has no new features added, except every year or two for a paid upgrade. Only the subscription version has tabs.