Printer HP desjet 932C

Similar Questions

• Windows 7 does not send print to deskjet 932c with parallel connection, help

  I got a new hard drive installed and old a cloned.  Now, I can not print to hp deskjet 932C printer in Windows 7. Printer is connected with a parallel cable. Has worked before but not after the hard drive cloning. Help

  1. There are two ports on the Deskjet 932.  One is for a parallel cable, it has a 25 pin plug on the end that connects to the computer and a PIN 34 taken to the side of the computer.  The other port is located right next to the parallel port.   This port uses a USB A - B cable, which is what you need.  The page here can help.

  I suggest the following:

  1. Buy a cable USB A - B, the right length (quite a long time to reach the computer to the printer.)
  2. Turn the printer off.
  3. Disconnect the current parallel cable to the printer and the computer.
  4. Turn on the printer.
  5. Connect the USB cable to the printer.
  6. Plug the other end of the USB cable to the computer.

  The page here can help.

• I followed the advice of HP and reinstalled my printer deskjet 930C/932C / 935c. Cannot print

  My printer is back online thanks to HP, but the printer will not print, it was printing my e-mails and other things like word.  Some web pages, that it would not print.  Now, it will print nothing.

  You can print a test page for the printer itself?

  1. Turn the printer off, and unplug the cable that connects the printer to the computer.

• install the printer driver for HPdeskjet 932C on a laptop HP with xp/pro

  I tried to use the original printer driver supplied with the printer HP Deskjet 932c on my HP laptop which has xp/pro, but I when he was in install mode I got a message saying "this driver is not supported by windows 2000." I would like to be able to use the printer as it stil works well, is there no driver available for this problem?

  HP has done far a very good Web site for downloading drivers for their products.
  Reach:
     <>http://www.HP.com >
  Then, place your cursor on "Support and drivers" above.  Enter "932C" in the window of product in step 2, and then click 'Go '.  Click on the printer that best describes your printer, and then click in the window "Select" to select your Windows XP operating system.  Click on 'Next' and the Driver links will appear.  Just download and follow the instructions.

  HTH,
  JW

• HP 932C PRINTER DOES NOT WORK ON A NETWORK WITH TWO DIFFERENT OPERATING SYSTEMS.

  I have a 932C HP printer connected via USB to a desktop Windows XP (Dell E520), which is part of a home network.
  I also have a HP Pavilion dv5 notebook, running Windows Vista Home Premium 64 - bit, connected to the same network. This book can find the printer on the network. However, when I try to capture the 932C printer, the following dialog box appears:
  "The printer"hp deskjet 930C series"server has not the printer driver installed. If you want to find the right driver, click OK. Otherwise, click Cancel and contact your network administrator or the OEM equipmente for the printer driver. »
  When I click OK, another dialog box appears:
  «The file ' *.» INF' we (unknown) is needed. Type the path where the file is located, and then click OK. »
  However, I can't find any feasible *.inf file in laptop HP hard drive (both partitions).
  I tried to download the driver from the HP website, but it says that Windows Vista already has the driver for this printer! Well, now I'm stuck!
  I want to emphasize that the printer works fine if I connect it directly to the USB port on the HP laptop. But I want to use the printer via the network, keep it hooked to the Windows XP desktop.
  How to solve this problem? Thank you.

  There is a post where a user got it works with another printer. I'll link below then you can try the solution here. Let me know what happens.
  
  Share the printer for 64 bit with 32-bit system

• DeskJet 932c with Vista 64 bit, a way to enable printing 2 sides?

  I have a Deskjet 932c that prints very well with my Vista 64 bit OS.  HP says that drivers are in the operating system.  When I used this printer with an XP operating system, I got many printing options, including printing 2 sides.  A way to achieve (except printing manually one by one odd number pages and then turning to print even pages)?

  Hello

  I guess you are referring to the two-sided printing module, it is available in the driver of in-BONE as well.

  Enter the control panel > printers.

  Right click on the 932C icon, and then click Properties.

  Click the device settings tab.

  Set duplex printing as installed, then the option must appear in the Printing Preferences dialog box.

  Kind regards

  Shlomi

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• MY FATHERS PRINTER DESJET F4580 DOES NOT PRINT COLLAR BLACK

  MY PRINTER DESJET F4580 FATHERS PRINTS BLACK COL-PHOTOCOPIES IMPOSSIBLE, THE ONLY PRINTABLE NOTEBOOK IN OTHER COLORS DOCUMENTS, PHOTOS NOT CORRECT WITH STRANGE SADOWS. THE PRINTER WAS NOT USED FOR A LONG TIME, INK TANKS ARE OK. AND I ALREADY TRIED DOCTOR SCAN (CLEANING OF THE HEADS ETC.)

  Replace the black cartridge.

• HP DeskJet 3630 all-in-one: desjet 3630 does not print color

  Hi, I bought a new HP DeskJet 3630 series all-in-one printer today. Setting up the printer I did several tests that show color printing, however, whenever I try to print an image in color (working on my daughters school book) it prints in black and white. I did troubleshooting all I can think of, we have no black & white printing turned on. I'm not quite sure, what else to make sure the printer is brand new and should be able to print in color?
  Any help or advice would be much appreciated.

  Not quite sure what I did to make it work, di, but the cleaning cycle for the cartridges of ink & rebooted several times, and the printer is now printing normally =)

• HP Deskjet 932C printer: printer cartridge failure

  Printer has started to produce the reddish-pink text instead of black.  Images of similar reddish pink color.  Cartridge printer in the State reported no problem.  Replaced the anyway black print cartridge and printer produces black text.  Replace the color cartridge (namely that some bands has been removed) and printer produces sharp images in black and white instead of color.  It seems that the printer thinks that he was ordered to ignore the color cartridge but I can't verify that.

  How can I gewt correct color printing back?

  What operating system? The document here, we address the printer print in B & W instead of color.

  I suggest printing a page of diagnosis as described in the document here:

  Running a test diagnostic

  1. Turn on the printer.

• HP DESKJET 932C model C6427B printer

  I am owner of a Mini Acer Aspire L310 with software Windows 7, 2 GB of Ram memory, CHipset Intel 946 GZ, 32-bit system. How to get the drivers and software to use to before mentioned printer on my PC.

  The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. Here is the step by step to achieve this.

• is my HPDeskJet 932C compatible printer before my Dell Vista computer.

  My printer performs well.  Changed computer Vista.  What should I do?

  Hello

  According to HP, it is compatible with Vista

  you will need to install the printer drivers correct vista

  Click the drop-down list at the link for your operating system below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=61236&LC=en&cc=us&DLC=en&lang=en&cc=us

  ____________________________________________________________

  Follow the HP info to getting started below

  http://h10025.www1.HP.com/ewfrf/wc/product?product=61236&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/61236/loc:0 & cc = us

  _____________________________________________________________

  For more information:

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• Office Jet 932C printer

  What print page 2 of document printing only prints less than 25% of the page.   Also passes a blank page after each print job.

  What operating system do you use? Looks like you are having driver problems. Let me know which operating system you are using so I can point you to a diagnostic tool and/or a download of a new updated driver.

  Thank you

  Sean

• Printer HP 932C range: Guard printing test pages

  2 days ago my printer had all the lights on and was blocked.  Suite of solutions HP, stop button / stop and button pressed to resume and released the button / stop. Printer worked fine. After an hour or two, test page about printed 4 times sporadically. The test page is the one with: HP Deskjet 930c Series (top), picture of a flower under it, «Everything is possible...» "underneath, then the HP logo on the bottom.   With my printer, it will display this page to test during the day or evening. Help, please.  Thank you.

  Thanks for getting back to me, tanga,

  I'm still not sure if the test page comes from the printer or the computer. However, you can certainly try another uninstall, restart the PC and then install the printer using the windows built in the driver (as there is no full features drivers or software available for this printer under Windows 7).

  Here is a link to help you install the printer on your computer: Printers HP - install and use the print driver Windows built-in

  When you have finished reinstalling the printer, try printing from Notepad to see if it works. You can also try running the printing and scanning Dr. too if there is no problem.

  If there are persistent problems, I would recommend then contact HP directly to see about a replacement or upgrade of printer.

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Deskjet 932c rest print head to the right, make noise interference but no paper?

  My printer is jammed. Turn it on after unplugging it and print head slides to the left the pass on the right side and made a noise as if it is stuck. There is no paper jam. Can you suggest what is the problem?

  I resolved glancing at this site http://support.hp.com/us-en/document/bpd09315 thanks for help forums.