Updating of the human task data control

Similar Questions

• Cannot drag the DataObject to the human task

  why I can't drag the dataobject object to set the parameters of the human task?

  In the control panel to create a human task,.

  Press the + and in the data to find object window I drag my data object to the human task pane

  He organizers can't work, task human Panel cannot receive the value of what I move to traverse it, window of the data object.

  Anyone know?

  If you plan use JDeveloper with Oracle BPM, you will need to get the JDK 1.6.

  Are you asking how to make JDK once JDeveloper has already been installed?  Instead of find all the configuration files that JDeveloper uses to identify the JDK, it will use, in my opinion, the best, safest and fastest by far is to simply reinstall 11.1.1.7.

  When you reinstall, be

  1. use the JDK that is bundled with JDeveloper (JDK 1.6.0_24) by selecting the 'Complete' installation or
  2. Download and install a 1.6.0_24 + JDK and then reinstall JDeveloper by selecting installation "Custom"->, uncheck the JDK group check box and select the "Browse" button to find and select the JDK 1.6 you have installed

  Dan

• How to close all the human task of a single process, when it ends?

  Hi all
  
  I have the following situation on the process divided into 2 parallel lines at the beginning.
  One way (let's call the PATH A) allow the user the cancel user tak of the process and at the end of the process directly goto.
  The other way (let's call it PATH B) is the process where the human tasks and after various steps at the end of the process are created.
  
  The user of the following:
  Istanziate the process.
  Met same human, but other tasks are still open... (CHANNEL B)
  After this I decide to run the task from the user to cancel. (PATH A)
  Because tasks human istances are indipendet since the life cycle of the process, my end of process, but I have same human task always open.
  
  How can I close these human tasks always open when the process is complete?
  Is there sort via the BPM API or any other way to do it automatically in the path?
  
  If you have any doubt I can explain more.
  
  Ciao

  I'm sure I misunderstood what it is that you do, but it seems you have a parallel gateway in your process and you have a path (your 'B' path) that comes out through the join and the other path (your 'A') has the opportunity to go out with an end event.

  If this is the case, then you might want to change that a parallel to the contrary to be a bridge parallel and complex gateway. Before you start, you want to add a new string data object in your process that store the result of the Interactive activity specifically in your path A (for example, "outcomePathA"). You would then be the right mouse click the parallel join-> click on "Configuration of the bridge of change to"-> click on "parallel and complex." You might, then right click on the new complex join-> click on 'Properties'-> click the "Application" tab-> check the box 'Abort pending flow. " On this same tab, set the logic to verify your result string variable to know if they clicked on the Cancel button of the track 'A' (for example ' "outcomePathA == 'CANCEL'). You also want to change the sequence flow for the path 'A' to connect to the join. Know you want to leave if she takes A path, so after the join, you can then add an exclusive gateway to check to determine if the user clicks Cancel in the path and have a sequence flow to go to an end event if this is the case.

• Question using the human task item

  Hello

  I have a problem with the human task. When I try to drag and drop a component in my composite.xml or my BPEL human task, I have this error:

  ERROR: Exception ClassNotFoundException for oracle.tip.tools.ide.workflow.sca.WorkflowSCAComponent

  java.lang.ClassNotFoundException: ERROR: ClassNotFoundException for oracle.tip.tools.ide.workflow.sca.WorkflowSCAComponent

  at oracle.tip.tools.ide.fabric.resource.SCAComponentRegistry.getSCAComponentInstance(SCAComponentRegistry.java:235)

  at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.add(ActionComponentEdit.java:101)

  at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.process(ActionComponentEdit.java:78)

  Can you help me please? I have not found anything!

  I'm on Win 7 and Jdeveloper 11.1.1.6.0.

  Thank you.

  Hello

  I finally found the solution, check that the SDM is correctly configured in your adf - config.Xml.

  Something like this:

  Kind regards

  Mustapha

• To access the output parameters of the human task

  Hi all.
  
  I encountered a problem I find
  very irritating. I already searched the
  Forum, and read in the net regarding
  This topic, but still have not been able to resolve
  the question.
  
  I have a simple type string variable
  ({[http://www.w3org/2001/XMLSchema]}, string)
  called "myName".
  
  First of all, I'm the initialization of this variable with the
  String "none":
  
  {color: #333333} & lt; assign the name = "setVariable" & gt;
  & lt; copy & gt;
  & lt; from expression = "string ('none')" / & gt;
  & lt; variable = "myname" / & gt;
  & lt; / copy & gt;
  & lt; / assign & gt; {color}
  
  Then, I'm passing this variable as an argument
  for a human task called "provideName", which has a
  editable attribute called 'userName ':
  
  {color: #333333} & lt; copy & gt;
  & lt; from variable = "myname" / & gt;
  & lt; variable = part of the "initateTaskInput" = "payload" query = "/ taskservice:initiateTask / task: task / task: payload / task: username" / & gt; ".
  & lt; / copy & gt; {color}
  
  Finally, just after the human tasks receive activity,
  I'm to pick up the so-called modified value and copy it
  Back to my variable:
  
  {color: #333333} & lt; copy & gt;
  & lt; variable from = part of the "provideName_1_globalVariable" = "payload" query = "/ task: task / task: payload / task: username" / & gt; ".
  & lt; variable = "myname" / & gt;
  & lt; / copy & gt; {color}
  
  After deployment and begin the process, I pretend that the task
  on the task list interface, change the next text field of the
  label 'userName' to 'none' to 'Tim', select 'APPROVE' and
  Press the button "GO". "." I get the "your request has been processed.
  successfully "-notice and the flow is reported to have"
  done, BUT: looking at the Audit trail, I find that the
  variable 'myName' has not really changed its value. There
  always 'none '.
  
  What I am doing wrong? I would be grateful for your help.
  
  Thank you!
  Pie
  
  -----
  Edited by: Tadhg207 (-& gt; format)

  Looks like you're doing all the right steps.

  The user saves the form (at the top right) before submitting?

  see you soon
  James

• How to upgrade field flex on a human task data?

  After entering a human task and assign the data how to update flex data on the ground while the task is always affected. I use the services of the task to communicate with the task and the filters apply according to the field of flex.

  I want to update the data when actions take place on the task e.g. suspend, acquire, release.

  Any ideas?

  You can go for the task, change the flex attribute value and update the task. Below you will find the steps we do to put in day one of the TextAttribute

  CompleteTask task = / / get the task using the task request service

  completeTask.getSystemMessageAttributes () .setTextAttribute2 (updatedfolderName);

  completeTask = / / update the task using the method "updateTask.

• Passing of value of the load capacity of the human task to query ADF VO BPM

  Hello world

  faced with the variable binding in the VO.

  This is the scenario:

  I have a page of the ADF in my BPM process that uses the variable in the flow of payload in variable display object related task.

  My VO has this query:

  Select FULL_NAME, user_name

  of ROLE_TEAM

  where in('IO-UB','AGG-CST-UB') role

  and cdc =: sector

  I need to pass the variable to link called 'sector' to it.

  In my office, I have the variable called 'sector' but I don't know how to switch to the VO.

  With the help of Jdev 11.1.1.7

  Can you help me?

  Thank you.

  Fairlie

  Well it should work, but it's a little more complicated that it should probably be.  ( Dan Atwood accessories to be creative!)

  You must call the method "ExecuteWithParams" on your view object before loading the page.  This can be done during the loading of the page, or in the taskflow (a bit easier to explain).

  First of all, as you described, create your SQL VO query with your variable binding "and cdc =: sector ' make sure 'sector' is a variable binding is set to be updated.

  Then, create the link to your payload BPM 'sector' value (we'll call it SectorPayload) on your page (just drag as a text of output so that ADF automatically creates the link).

  Now go to the taskflow which has your page that you are trying to view and expand the data control / view the object you want.  The "ExecuteWithParams" method (in the folder of your VO in the DataControl operations) drag the taskflow.  You will be prompted with an Assistant "Change the binding Action" which will have your listed parameter.  Its 'value' uses the phrase EL editor develop "links ADF-> data-> of the page that you have created SectorPayload on (com_company_pagePageDef)-> variable-> inputValue. SectorPayload.  The resulting expression should look like:

  "#{data.com_avioconsulting_demos_showMyPayloadPageDef.SectorPayload.inputValue}".

  Right-click activity and go to the activity of the brand-> by default (it runs everything first and highlights its green).  Then draw a line from this activity to your view.

  The view object should now be filtered according to your variable binding.

  HTH!

  -Kevin King

• Typedef reference FPGA not updated in the private class data

  I have a FPGA reference related to a typedef that is passed in a LVOOP object. If I change the FPGA of computer simulation of dev to the use of the actual hardware, all references to the typedef are updated which are controls on a diagram. But the typedef in my private class data seems not not to date, so I'm broken son until I replace the control to private data of my class with a copied from my block diagram. Has anyone seen this? Is there a CAR already? I can create a small project to reproduce if necessary.

  Edit: this also seems to happen when I change bitfiles or change to open a VI a bitfile opening in the Configure dialog box open FPGA VI.

  Hi Greg,.

  I was able to reproduce your problem thanks to your easy to follow instructions.

  I noticed that type def successfully by checking "Bind FPGA host of reference to the type definition" in the open FPGA VI reference configuration. What does not automatically update is the Issue.ctl of OBJECT-oriented programming, which has a nested type definition in the private data reference.

  The fastest solution, that I could find was to right click on "Issue.ctl" in the project, and then click Save. This problem immediately solved the broken wire error.

  While configuring open FPGA VI reference has the practical ability to bind to the def of type, it does not broadcast this change to data private to the class. I call not this bug, but I can see how you want it works this way.

  I would recommend you post that on theExchange of ideas (I see you're already regularly here).

• Can't place separator reference in the private class data control

  Any reason, I can't drag and drop a splitter reference leave my block diagram to a private open class data control? Basically, I'm ignored when I let it go, even if I see an icon 'drop' after that I drag the control.

  Well, I think I got smart and just placed a generic control Refnum into the command group, and then used the VI of the server class to identify it as a separator. Interesting how I could drag and drop references to the sub-panels and other types but not a divider.

• Find / create / update using the Web service data command.

  Hello
  
  I'm working on PS2 (JDEV 11.1.1.3). One of the requirements is to build Web services from ADF pages. Initially the user connection is looking for items. The results would then be displayed as a read-only table. The user will select line clicks on the button "edit / update" then I need see the second page with the details of record selected as a form. Then he can add / edit the page. The same page is also used to 'create '. I am facing issue while the user selects the record in the table Details the research and passing the Id on the second page of the update of the. Can someone help / guide me.
  
  I went through the blog of Shay. http://blogs.Oracle.com/Shay/2010/05/updateinsert_with_adf_web_serv.html
  But it's different compared to my needs.
  
  Enjoy your entries.
  
  Thank you
  Mahesh

  I don't see exactly how have more fields influence the approach.
  If you are looking for a shortcut, you can try to drag the operation of fusion, as a form of parameter ADF - this will create all the fields for you. And then you will need to go in and change their value to point to the pageFlowScope object.

• Get surveys using filtered with the ID (space) data control manager surveys

  Hi all
  
  I need to get surveys using surveys Manager DataControl a space specific webcenter. I did not find any function under the control of data for surveys Manager for passing the scopeId as argument parameter.
  
  Is it possible to filter the polls based on the id of the scope?
  
  Can someone help me?
  
  Kind regards
  Suma

  According to the documentation.

  http://docs.Oracle.com/CD/E17904_01/WebCenter.1111/e10148/jpsdg_polls.htm#CIHIIJHG

  There is no scope ID to filter the polls based on spaces.

  But in any case, to achieve your desired goal, I would say that...

  Create surveys Mutiple (surveys) and on each Survey (Polls) you can have questions to take the poll.

  Thus,.

  Space 1-> 1-> Question 1 survey

  Space2-> eurobarometre2-> issue 1

  Space3-> poll3-> Question 1.

  All by posting the question you can use take survey taskflow or datacontrol where you will need to provide a SURVEY_ID in the pollId parameter.

  I hope that clarfiies your request.

  Kind regards
  Hoque

• [VxWorks PXI] How to ensure that all updates in the buffer of data has been written to disk before you stop?

  Hello

  I have a RT SMU-8135 that records events and data from various sources in CSV files and custom binaries. I'm looking for a way to protect against data loss during a normal shutdown.

  Windows or Linux, I can programatically close the application and the operating system; It's enough to dump all the data disc and turn the power off when it is safe. However, as far as I know, there is no way to programmatically close a VxWorks target (e.g. http://forums.ni.com/t5/Real-Time-Measurement-and/Shutdown-of-cRIO-or-sbRIO-via-software-command/td-... )

  The best method I can think of right now is shut down properly the application of RT, wait "long enough" for buffers to clear and resources to be released, and then press the power button. The challenge is, I can't get good reviews when the application is fully closed.

  Is a more reliable way to do this? (Or am I overthinking things?)

  Thanks in advance for any advice!

  Hey JKSH,

  A number of things. First of all, are you sure that the SMU-8135RT is running VxWorks? The link below suggests that it is running Phar Lap ETS. On this basis, see the second link below, which tell about a similar question regarding the Phar Lap. The short of it is that it is not a software based on RT Linux targets non stop. Essentially, if you want to make sure that things are not going when you turn off, you will need to do something as printed in the console as it is ready to be put off tension after you have completed the activities, or have an LED start or stop flashing. So far, it doesn't seem there's a clear way to determine when all other activities have finished, but it seems that it is always "safe" stop the target at any time (safe for the target, but this does not guarantee that all activity is performed).

  What operating system is my controller real time running and why?

  http://digital.NI.com/public.nsf/allkb/35F1FD98520D6E0E8625783A005AF557

  Stop ETS

  http://forums.NI.com/T5/LabVIEW/switch-off-ETS/m-p/841366?requireLogin=false

• Changing the settings of data control for the Web Service with the company Manager

  We have different environments for the development, test, acceptance and Production. In the environment, we use different instances of the BSSV server so we have several points of endpoints for Web Services. When we move at the request of the ADF from one environment to another, we do not want to change the source code, but we want to change endpoints using configuration. We have seen that store them in Enterprise Manager, we can change endpoints and that this configuration will be saved in a MDS. But what precisely needs to be configured on the application to get this working? Now, we can change endpoints, but they are not saved.
  
  I found the information in this blog but it doesn´t work: http://blogs.oracle.com/adf/2011/02/changing_endpoint_url_for_a_web_service_data_control.html
  
  Joost

  Hello

  If you want to configure deployment position of connections, it is necessary for your application to be configured with a Repository.As of MDS in writing I'd mentioned in the blog too, for that you need an entry in the adf - config.xml and that your server must have a registered MDS store. Unless you are going to do this, the connection endpoint changes you make will not be saved.
  For example, at the end of the application, adf-config.xml file, you need an entry like this:
  .
  
  
  
  
  
  
  
  
  
  
  .
  When you deploy this application a server with a registered MDS, the deployment repository will bring up a dialog box where you can set(select/create) a partition for this app in the mds repository. Once your deployment is done, now if you change the endpoint using EM, it will save your changes.

  Vishal-

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.