Upgrade for the WLC code questions
We 6.0.132 (lastest) WCS and our controllers are on 4.2.130, we now to upgrade to deal with sometimes, but don't want to capwap yet.
Question 1: what is the last exit LWAPP code?
Question2:Whats the differences between 4.2.207 (support page for cisco said it's the latest version), but it has same releases with ie 6.0 how it works it is very confusing workout a way to upgrade to higher versions
See you soon
Hi Tyrone,
I'm not an expert on the management of versions, but here are some basic in response details
at your request
4.2.207 is the last version on the Train of 4.2 and is without doubt an excellent choice
If you are avoiding CAPWAP for now. You will see in the link below which
There are several 'simultaneous' for the WLC Trains (and most of the Cisco product). People
were not big fans of the first Trains 5.x (quite buggy) and was introduced to CAPWAP
in 5.2 and the attacker thus is why 4.2.207 seems to be a good choice for you
In the later version or 5.2 controller software version, Cisco lightweight access points use the IETF control and commissioning of Access Points (CAPWAP) standard protocol to communicate between the controller wireless and other points of light access on the network. Versions software controller before 5.2 use the Lightweight of Point access (LWAPP) Protocol to these communications.
CAPWAP, which is based on LWAPP, is a standard and interoperable protocol that allows a controller manage a collection of wireless access points. CAPWAP is implemented in version 5.2 software controller for these reasons:
*
To provide a path for upgrade of Cisco products that use LWAPP generation Cisco products that use CAPWAP
*
To manage RFID readers and similar devices
*
To allow controllers to interoperate with third party access points in the future
LWAPP compatible access points can discover and join a CAPWAP controller, and conversion to a controller of CAPWAP is transparent. For example, the process of discovery of controller and firmware download process when using CAPWAP are the same as when you are using LWAPP. The only exception is for layer 2 deployments, which are not supported by CAPWAP.
You can deploy CAPWAP and LWAPP controllers on the same network. The CAPWAP compatible software allows access points join to be a controller running CAPWAP-LWAPP. The only exception is the Access Point Cisco Aironet 1140 series, which takes in charge only CAPWAP and joined so only controllers that run CAPWAP. For example, 1130 series access point can reach a controller running CAPWAP or LWAPP considering that access of series 1140 point can join only a controller running CAPWAP.
http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml
4.2.207 was released on July 24, 2009 which makes the new second version available on any train.
http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html
See you soon!
Rob
Tags: Cisco Wireless
Similar Questions
-
If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?
Hi elvirkaric,
Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads
-
How to get the date of deployment for the RT code?
I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?
Thank you
Martine
Hi John,.
You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.
Aaron P
National Instruments
Technical sales engineer
-
Is it permissible for the 77-177 (questions), training (Microsoft project), I have windows 2010 R2
Hi, Donna.
According to me, that it would be better if you posted your questions in the TechNet forum for assistance.
This is where professionals share their expertise.
-
What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.
What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.
Hi, Jason.
the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.
phone numbers:
* In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX
See also this forum account issues:
Have you tried using another browser? Google Chrome, Firefox?
Contact for chat
-
Windows cannot check for the error code 80070424 updates.
I have windows vista premium x 64
Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
I searched everywhere for an answer... Please help----
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
I just bought an upgrade for the 14 items. I downloaded it, but when I try to activate it I need a serial number. When I connect to my Adobe account and follow the links, there is no information in my account on the product so no serial number. Can anyone help?
When you purchase a download you will be emailed a serial number... did you receive your email?
Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.
-
need of support code for the challenge code
need of support code for the challenge code
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I'm looking for the Pin Code of the card UMTS Vodafone
Hello
I bought Lenovo T400s and was surprised to find a Vodafone SIM inside!
Now I want to use a seaching for the PIN Code, dose sombody knows where I can find?
I only find a card with a no. P. and an ICCID Code, it not there no manual or any other information.
Thanks for the help!
larsspo, welcome to the forum,
the PIN code for the previously inserted in Germany SIM cards is 0000.
Hope this helps
-
Compatibility of the AP1240 series with the 8.2.111 of the WLC code
Hello world
I need advice on this one if anyone could happen to any suggestion.
We have remote sites (4-5) where we again 1242 series APs. Recently, I upgraded my controller 8.2 WLC code and these APs do not come to live as they are stuck in "Download"... ».
Linked below, Cisco said 1240 series is no longer supported.
http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/release/notes/c...
Now, my question is there any solution for this or that's all. We need new APs for remote sites.
On the other hand, I also Cisco 3850 WLC active Cisco switch, so I can use Cisco 3850 for these APs. If so, then please share any link.
Kind regards
The choices are:
1. the new APs get handled by the 3850 and the old APs is maaged by WLC running 8.0.X. or
2. the years 1240 is converted into a stand-alone; or
3. get another controller, as the 2504, for example.
-
Pavilion dv7-6157 can be upgraded for the games?
I bought my son the Pavilion dv7-6157nr two years ago and he has problems with graphics on the high-end gaming, he plays. They freeze or crash. It has 8 G DDR3 SDRam, 2 generation Intel Core i7 2.2 GHz - 3.10 turbo and a radeon HD 6770Ms graphics card. Video memory it says "itchable graphics"... What does that mean? This computer can evolve in a way that would help the graphics? Y at - it a graphics card or driver upgrade? More graphics memory can be affected?
I'm tired of hearing that suck laptops.
Laptops are not really designed or constructed for the high end games. I doubt that adding memory will make much difference. Given that the two most important points (CPU and GPU) cannot be updated easily, it is a losing battle.
The only other options I can suggest are...
(1) a HP System Recovery to return the computer to a factory like State
(2) do a clean install of WIndows 7 and try to use latest drivers for chipset manufacturers
(3) buy a new computer that exceeds the requirements of game
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Processor upgrade for the games.
I have a Hp envy with a Core i7-4510u Cpu and a GeForce GTX 850 M.
It works fairly well for the games, but I was wondering if it would be better if I swapped the Cpu for something different, and what models I could exchange it for.
Hello
What is your computer? It's a laptop? If so, save the money to buy the new machine because the graphics card for a normal laptop upgrade is impossible bunch of costs, more than buying a new, better machine.
Kind regards.
-
Y at - it an option to upgrade wifi AC for the TOUCHSMART from HP ENVY 17-J185NR NOTEBOOK PC / PN F9M06UA?
You are the very welcome.
Yes, with one of these cards, you will have bluetooth.
I prefer Intel products, but the MCB card should be fine also.
I bet, too, that you can install the Intel 7260 AC map better, even if it is not on the list.
Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + BT 4.0 HP Part # 710661-001
-
MrFixIt of E0434F4D program for the error code does not work because of this error
When you install the update for Microsoft .NET Framework 1.1 SP1, I get the error E0434F4D code. MrFixIt program does not work because of this error. I can't run applications because of this corruption. Including most Microsoft applications, as soon as I try to run an application, I get a window saying 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "I recently got this used pc and I looked at the history of the update, and it was apparently a failed update for the past two years. This will also prevent me to update other software and drivers on my computer and prevents even me to install new drivers.
Hello
1 have had any changes made on the computer before the show?
2. when exactly you get the error message?
3. what happens when you try to run Microsoft Fix it?
4. What is the full and exact error message?
I suggest you check the thread with a similar problem, and a fix:
If you are having problems with Microsoft Fix it tools, I suggest you to send your request in the Microsoft Fix it forums for assistance.
Microsoft Fix it Forum
Maybe you are looking for
-
ENVY 15-K202NT: SSD Slot m2
Hi all I read a lot of resources on this forum about M.2 SSD abot slot and I have a few questions. First of all, I want to replace this SSD with a capacity of higer and install the operating system to this ssd without removing the HARD drive. I menti
-
Anyone know if the plex media server can be installed on the px series?
-
X 230 is not booting HD Just boot menu?
Need help guys, this am that I turned on my X 230 and all I get is the start menu! Don't boot from the hard drive. Then I jumped the HD in a different X 230 and booted up fine. Anyone have any ideas? Thank you!!
-
compare two table with cluster inside
Hello I want to compare two tables containing a cluster with several groups in it. When you use the equal the result is the same pattern as the cluster of entry. But I just need a true or false. It doesn't bother me that it changed on position 1 or a
-
Install Windows 8 on a new computer using the same product key
Currently I use an HP laptop and I activated my WINDOWS 8, but now I want to buy a new ASUS laptop and I want to know if I can use the same key or not. Windows 8 I bought is a retail edition. Original title: WINDOWS 8 KEY