Compatibility of the AP1240 series with the 8.2.111 of the WLC code

Similar Questions

• Upgrade for the WLC code questions

  We 6.0.132 (lastest) WCS and our controllers are on 4.2.130, we now to upgrade to deal with sometimes, but don't want to capwap yet.

  Question 1: what is the last exit LWAPP code?

  Question2:Whats the differences between 4.2.207 (support page for cisco said it's the latest version), but it has same releases with ie 6.0 how it works it is very confusing workout a way to upgrade to higher versions

  See you soon

  Hi Tyrone,

  I'm not an expert on the management of versions, but here are some basic in response details

  at your request

  4.2.207 is the last version on the Train of 4.2 and is without doubt an excellent choice

  If you are avoiding CAPWAP for now. You will see in the link below which

  There are several 'simultaneous' for the WLC Trains (and most of the Cisco product). People

  were not big fans of the first Trains 5.x (quite buggy) and was introduced to CAPWAP

  in 5.2 and the attacker thus is why 4.2.207 seems to be a good choice for you

  In the later version or 5.2 controller software version, Cisco lightweight access points use the IETF control and commissioning of Access Points (CAPWAP) standard protocol to communicate between the controller wireless and other points of light access on the network. Versions software controller before 5.2 use the Lightweight of Point access (LWAPP) Protocol to these communications.

  CAPWAP, which is based on LWAPP, is a standard and interoperable protocol that allows a controller manage a collection of wireless access points. CAPWAP is implemented in version 5.2 software controller for these reasons:

  *

  To provide a path for upgrade of Cisco products that use LWAPP generation Cisco products that use CAPWAP
  *

  To manage RFID readers and similar devices
  *

  To allow controllers to interoperate with third party access points in the future

  LWAPP compatible access points can discover and join a CAPWAP controller, and conversion to a controller of CAPWAP is transparent. For example, the process of discovery of controller and firmware download process when using CAPWAP are the same as when you are using LWAPP. The only exception is for layer 2 deployments, which are not supported by CAPWAP.

  You can deploy CAPWAP and LWAPP controllers on the same network. The CAPWAP compatible software allows access points join to be a controller running CAPWAP-LWAPP. The only exception is the Access Point Cisco Aironet 1140 series, which takes in charge only CAPWAP and joined so only controllers that run CAPWAP. For example, 1130 series access point can reach a controller running CAPWAP or LWAPP considering that access of series 1140 point can join only a controller running CAPWAP.

  http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml

  4.2.207 was released on July 24, 2009 which makes the new second version available on any train.

  http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html

  See you soon!

  Rob

• On the Sync Palm m500 using connection series with a dock under Windows 7

  Palm: m500

  Link: Serial (cradle)

  OS: Windows 7

  Problem: Palm Desktop 4.1.4 cannot be installed and does not synchronize Palm Desktop 6 using the serial connection.

  How can I synchronize the m500 using connection series with a version of PD under Windows 7?

  Nevermind, helped http://forum.brighthand.com/sync-windows-palm-os/261651-synching-legacy-pim-databases-palm-desktop-v-6-2-a.html .

• How to get Firefox to check the compatibility of the addon first, then ask me if I want to continue the update of Firefox?

  How to get Firefox to check the compatibility of the add-on first, then ask me if I want to continue the update of Firefox? The update process currently only told me that an add-on has been disable after you apply the update to Firefox. Options > Advanced Options > switch to the update tab, "Warn me if this turns off one of my modules," doesn't seem to work.

  delores51

  This is an add-on that does this.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/is-it-compatible/

  More specifically, what modules are always appear as incompatible after a Firefox updated? Firefox 10, extensions that are made properly shouldn't be a problem, with a few exceptions.

  Extension that contains a binary code must be compiled for each new version of Firefox. These modules are usually installed by applications on security Norton, McAfee, ZoneAlarm, etc..

• Windows 7 Internet games to fail with the error Code 0x8004100x

  I'm running a machine, Windows 7 Professional, where I manage hundreds of computers remotely.  (I hope, that will alleviate the need for anyone to ask me to check my internet connection.)

  It is unpredictable whether or not I will be able to properly play a trump play stings on the Internet.  At one point, he's going to connect to the game server, find players and connect to the game, but do not start the game.  If I try again, it will start the game in a few seconds.  Here again, it may crash when connecting to the server or the game.  But over several days, I can't play a game about half of the time I tried.  The rest of the time, I get this error:

  "A network error occurred during communication with the game server.

  "Error code: 0 x 80041009.

  On other occasions, the error code is 0 x 80041006 or 0 80041004 x.  In this case if I do anything else with my connection or not.  I could be listening to Pandora or watch a live news feed, but I can't play Spades.  I might be able to play Backgammon Internet very well, but not of spades.  Less often, I can play Spades but not Backgammon.

  And this error occurs on other computers I use, too.  For example, my son may very well play World of Warcraft.  But Trump stings on the Internet cannot connect to its server.

  There is no problem with my computer.  I've never seen a game with more reliable performance network - no matter the reason.

  Thanks for your reply, Aaron.  I did these tests, but nothing has changed.

  HOWEVER, after I had re-enabled everything that I had turned off and restarted the machine, I then installed the Tower from the end of September of Microsoft Updates (I did the 10/4, after that I had tested the updates before distribution to my networks). These are updates that I have installed on this machine:

  • For .NET 3.5.1 security update (KB2416471)
  • Update of security for .NET 4 (KB2416472)
  • Update for Windows 7 (KB2158563)
  • Update for Microsoft Silverlight (KB2416427)
  • Microsoft - other hardware - peripheral USB Microwosft mouse
  • Update for IE8 (KB2362765) compatibility view list
  • Update for Windows 7 (KB2288621)

  After the restart, I tried the games a few hours later, and I was able to play about 90% of the time - a record! -without receiving the network error.

  It is worth noting that I restarted the computer three times while testing the elements start and then once after installing the updates, date at which I have found improvement in connectivity game.  I rebooted the computer twice since and the games play much. (Relatively: I call 'good' 90%.)

• Quality/compatibility of the new hard drive for my laptop

  I have a toshiba satellite A105-S2194. I went online to get a replacement from the hard drive. The guy who I spoke to suggested that I get the data of 1 TB 2.5 5400 RPM. I asked if this was no exaggeration for my computer and if she would work with her. He assured me he would. I have windows 7 to load on this subject. My question is. It is true that he did and work in my laptop? It is with Fed - ex delivery and need to know whether to install or send back

  The SATA standard is so clearly defined that virtually any disk 2.5 "will work on a laptop. High speed drives (7200 RPM +) could draw in theory more current that might have been specified, even if the newer readers are more effective. With regard to the compatibility of the BIOS limitation of size should not enter up to 2 TB

  Even if the laptop is quite old it supports disks more large, Toshiba lists only readers that they mounted but Crucial list upgrades up to 1 TB.

• Mode of compatibility in the operative part of Strom

  Hello

  So I am writing an application that will eventually be used on the BlackBerry. I designed originally for the program to work for "BOLD" and now, I'm testing a version of the storm. I used the IDE for the "BOLD" 4.6.1.

  I have reviewed the Article number: DB-00710 "Compatibility Mode on BlackBerry smartphones with touch screen", but:

  When I turn on activate to compatibility mode:

  1. it shows a blue border.
  2. the menu does not display the options hide/show keyboard.
  3 Select to use the touch screen.

  When I turn disable it for compatibility mode:

  1. the application appear on the main screen. It's Ok.
  2. the menu options hide/show keyboard. It's Ok.
  3 disable use the touchscreen. It comes to my questions.

  I need that my application:

  1. the application appear on the main screen. Fact.
  2. the menu options hide/show keyboard. Fact.
  3 activate use the touchscreen. Pending.

  Then, I need compile my application on JDE 4.7.0 IDE and this problem will be solve?

  Thank you.
  Jorge Luis.

  If you compile an application in JDE lower version and running it on JDE 4.7 Storm, compatibility issues will be there.

  two ways to avoid it.

  (1) If you don't want new compileit in JDE 4.7, just install cod on storm, go to option-> advance-> application options.

  Select your make from the menu, select disable compatibility. It runs very well.

  (2) to compile the app again to the JDE 4.7.

• Uplink on the WLC 2100 series

  Hello

  I missed something in the Cisco WLC 2100 series documentation. In fact, the plug technical it is mentioned that the WLC 2100 "provides eight 10/100 Ethernet ports to support a combination of access points and rising redundant LAN", while in the configuration guide noted that the WLC 2100 supports no LAG (aggregation of links). So how WLC 2100 can use a redundant network connection without aggregation of links?

  Thank you in advance.

  You can use a port for management and interface ap - manager and another for the vlan specific used for the ssid of your wlan with connection of access points to your WLC. This way you can say that port 1 is your management and ap-Manager, port 2 is for your internal ssid vlan x, port 3 is for your voice ssid vlan x, port 4 is for the traffic of comments, 5 & 6 port is used to connect the two access points.

• How to change the setting of compatibility of the MSI installer?

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  21/06/2010 13:09, Jeff_PAML wrote:

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  Have you tried to install the file without changing the compatibility first?  If this isn't the case, you may be able to install and then change real compatibility on the exe file of the application (and Windows 7 can do for you automatically if it detects problems with the application).

  Hope this helps and have a nice day :)
  Patrick.

  Smile... Someone out there cares deeply about you.
  Have you updated today?
  http://update.Microsoft.com

  Smile... Someone out there cares deeply about you.

• Backward compatibility - migrating the members of 11.1.2.4 to 11.1.2.3 contour?

  Good snow shoveling day everyone!  I hope that you have found the right higher training!

  Our production ASO cube lies in 11.1.2.3
  Our test ASO cube lies in 11.1.2.4
  We want to migrate members in the outline of the ASO cube production ASO test.
  
  There is backward compatibility of the migration of members of the contour (migration of members of 11.1.2.4 to 11.1.2.3 contour)?
  In other words, we can migrate 11.1.2.4 describe 11.1.2.3 members? Is it a 'backward' migration utility that would allow us to migrate 11.1.2.4 a glimpse back at 11.1.2.3?
  
  Psalm, we know that when we move 11.1.2.3 State to 11.1.2.4, 11.1.2.4 ASO would we require to migrate 11.1.2.3 briefly 11.1.2.4 front.

  We have the planning and LCM, but tech support said 11.1.2.4 LCM is not compatible with 11.1.2.3 (aka there are a few bugs).

  Otherwise I guess we can use the contour of the OLAP Underground to migrate Extractor.

  Thank you.

  No alcoholic Cheers!

  If it is before 11.1.2.3.500, then there will be such issues as pointed out 'Essbase Administration Services (EAS) outline 11.1.2.3.500 to 11.1.2.3.000 empty file Migration Wizard creates (Doc ID 1927334.1).

  Migration of a glimpse through earlier versions is certainly risky and you're only going to be clear if it is rebuilt.

• can someone help with the following code plsql errors...

  Hello

  If anyone can help with the following code... to get a successful outing.

  create or replace package lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);

  end lib_01;

  create or replace package body lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as

  number of v_user_id;

  v_user_name varchar2 (50);

  number of v_avl_books;

  number of v_avl_days;

  date of v_end_date;

  date of v_return_date;

  Start

  dbms_output.put_line ('Enter User Name');

  dbms_output.put_line (' username :'|| p_user_name);

  Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;

  If v_user_name <>p_user_name then

  dbms_output.put_line (' username is not.) Please submit full name ');

  end if;

  If v_user_id is null or v_user_name is null then

  dbms_output.put_line ("' user not found");

  validate_userLogin;

  on the other

  validate_issuedbooks (p_issuecount);

  end if;

  If v_issuecount < v_avl_books then

  issuebooks;

  on the other

  Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);

  end if;

  If paid_flag = "Y" then

  issuebooks;

  on the other

  dbms_output.put_line ("' book may be issued due to its maximum reached late fees");

  end if;

  end lib_proc01;

  procedure validate_userLogin is

  procedure reg_proc is

  procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is

  v_id_proof varchar2 (20);

  v_id_no varchar2 (20);

  Start

  Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;

  If v_id_proof = "Adhar_Card" then

  dbms_output.put_line ('user a valid proof of ID');

  dbms_output.put_line (' and the id no. :'|| is p_id_no).

  on the other

  dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ('No Data found');

  end user_validate;

  procedure member_validate (p_mem_id series)

  v_mem_flag char (1);

  curr_date date: = sysdate;

  date of v_mem_enddate;

  Start

  dbms_output.put_line('Mem_flag:'|| v_mem_flag);

  Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;

  If v_mem_flag = 'n' or v_mem_flag is null then

  dbms_output.put_line ('The User do not have membership');

  on the other

  Select mem_id in the v_mem_id of user_login where user_id = v_user_id;

  dbms_output.put_line ('the user has membership');

  v_mem_id: = p_mem_id;

  Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;

  If v_mem_enddate < curr_date then

  dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);

  on the other

  dbms_output.put_line ('User a validity again' | v_mem_enddate);

  end if;

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  while others then

  dbms_output.put_line (' another error.) Please find");

  end member_validate;

  Start

  insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)

  address_ty ("& bldg_no",

  '& bldg_name',

  '& Street',

  ' & city ",

  '& State',

  '& zip'

  ),

  user_phone ',' & user_mail ',' mem_idproof', ' & id_no');

  Dbms_output.put_line ('user is properly registered');

  exception

  When no_data_found then

  dbms_output.put_line ("' data not found");

  end reg_proc;

  Start

  Dbms_output.put_line (' enter ID or user name ');

  Dbms_output.put_line (' username: ' | p_user_name);

  If v_user_name is null then

  Dbms_output.put_line ('user not found');

  reg_proc;

  Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);

  Dbms_output.put_line (' because the user wants to have the membership? ");

  Dbms_output.put_line ('If Yes, please pay dues");

  INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;

  END IF;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  When too_many_rows then

  dbms_output.put_line (' too many lines).

  END validate_userLogin;

  procedure validate_issuedbooks (p_issuecount series)

  number of v_issuecount;

  Start

  Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;

  SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;

  v_issuecount: = p_issuecount;

  dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);

  end validate_issuedbooks;

  procedure issuebooks is

  procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is

  v_avl_now_flag char (1);

  date of v_avl_date;

  procedure reader_bookissue is

  Start

  insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);

  insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);

  Update book_availability set issued_to is "Reader" where book_id = v_book_id;.

  end reader_bookissue;

  Start

  Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;

  If v_avl_now_flag = "Y" then

  dbms_output.put_line ('the book is available for issuance' | v_book_id);

  on the other

  Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);

  If v_mem_type = "Reader" then

  reader_bookissue;

  dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;

  on the other

  dbms_output.put_line ('the book is member');

  end if;

  Select avl_date in the book_availability v_avl_date where book_id = p_book_id;

  v_avl_date: = p_avl_date;

  dbms_output.put_line (' the available date is: ' | p_avl_date);

  end if;

  end book_avl;

  Start

  insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);

  Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;

  commit;

  dbms_output.put_line ("' the book published successfully");

  end issuebooks;

  Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is

  number of v_extradays;

  number of v_latefee_total;

  number of v_latefee_per_book;

  number of v_latefee_per_day;

  number of v_book_count;

  Start

  Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;

  p_extradays: = v_extradays;

  v_latefee_per_book: = v_latefee_per_day * v_extradays;

  v_latefee_total: = v_latefee_per_book * v_book_count;

  p_latefee_total: = v_latefee_total;

  dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);

  end late_fee;

  end lib_01;

  Hello

  I checked the first 10 lines after the beginning and I could count already several errors.

  Is it an exercise or a real code, you must provide?

  Kind regards.

  Alberto

• Backwards compatibility of the CC Lr Lr 5 for temporary subscription

  Hello

  I bought Lightroom 5 in November 2014 and I hope temporarily to CC (Lr and Photoshop). This is to make use of the panorama of Lightroom CC and HDR features but also using photoshop to merge images. I only have the demand for these functions to a handful of images, however, and so I'm likely to use the software temporarily for one month subscription.

  My concern is the backwards compatibility of the software, and how my Lightroom 5 software is affected by the CC. Will I be able to use CC with my current library and after use it simply continue with Lr 5 and the new images? CC will be autonomous and does not affect my purchased version?

  Thanks a lot for your help.

  Matthew

  LR CC is not available for a monthly subscription.  You purchase a subscription of $120 / year with a plan to pay $ 10 / month, but for all 12 months, not only for one.

  The only way to get a monthly subscription would be to a Single App to the month PS CC subscription for $30 / month.  PS/ACR will be able to do the same HDR and Panos LR, so my suggestion would be to get a subscription in single-app in PS, then make your HDR and Panos and save those 16-bit TIF, then import these objectives into LR 5.

  Information on what plans are available here: https://creative.adobe.com/plans

• How to export a .mov with timecode file corresponding the time code on the timeline of my project?

  Hello:

  It seems it would be an easy thing to understand, but I'm deleting so far:

  I have a video of the source of long, 10 minutes (actually a series of film clips 16mm which were telecined to a single uncompressed .mov 10-bit with continuous timecode by a film laboratory) on my project timeline.  I need to be able to export a small section of the timeline for individual .mov files - and I need to be able to open the short .mov files in a logging of film application called F5.  Currently, I'm making these videos in H.264 .mov files, since it is a format that F5 can read.  Rendering/export selection "work area" of my project works very well, so it's no problem.

  The problem I have is that timecode of the resultant .mov H.264 files do not match the time code on the timeline of the project of my first - they always start at 00:00:00:00.  I don't want that.  If I made (for example) a section of 00:05:10:00 to 00:07:00:00 on my project timeline, I need time to start exported .mov file code 00:05:10:00 and the 00:07:00:00, does not restart at 00:00:00:00.  Is this possible?

  I'm in first Pro CS6.0.2 on a Mac OSX 10.8.2, all installed updates.

  Thank you very much.

  works by using "title" (cause its alpha) but does not work using the video black... I have to jump through hoops to do it this way... is nuts... so title works fast

  so you put cti where you want to start, updated title to the top he put above your video, timecode in, "generate", set the start time to slide the title at the end of your work for the export bar... and it should be good...

  safe way to ann is good also

• Compatibility between the cloud and non-nuage versions

  I'm sure that there will be no problem of compatibility between the same versions of cloud and non-cloud products. But what about the feature updates that are mentioned as an advantage of cloud products. How they affect the file format. It does not depend on whether or not I use a feature of some? These updates will be only to provide features that do not change the file format? For example: if I have version 6.0 non-cloud InDesign on one computer and 6. ? InDesign clouds with a new feature that it did not in the non-cloud version yet, can I save a file with the version of cloud and open it with the no-cloud version?

  Hi Mosaicpress,

  Files saved from creative Cloud of products versions are compatible with "framed" copies of the same program. Creative specific characteristic cloud updates will not affect the file format.

  -Dave

• Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  TT2

  Leave comments for Apple to http://apple.com/feedback/appletv.html.

  Furthermore, Yes, that would be nice.