Upgrade memory for iMac 24-inch, early 2009

I want to upgrade memory for my iMac 24 inch, early 2009 with 4 GB. What a memory of 8 GB will work Best Buy? I have a gift card I want to use.

Thank you!

Looks like you can get RAM for about half the cost at crucial.com

You need 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

Tags: Mac

Similar Questions

  • Sierra download on my iMac (24 inch, early 2009) w/8 GB memory

    Sierra will not download on my iMac.  I get the following message: "we could not complete your purchase.  This version of macOS 10.12 cannot be installed on this computer. »

    I have an iMac (24 inch, early 2009) w / 8GB memory running OS X El Capitan v.10.11.6 that meets the hardware and software requirements for installing Sierra.

    Any suggestions would be greatly appreciated.

    Sierra requires an iMac Late ' 09 or newer.

    • MacBook (late 2009 or newer)
    • MacBook Pro (mid-2010 or more recent)
    • MacBook Air (late 2010 or newer)
    • Mac mini (mid-2010 or more recent)
    • iMac (late 2009 or newer)
    • Mac Pro (mid-2010 or more recent)
  • iMac (24 inch, early 2009) freezes and then thaws

    iMac (24 inch, early 2009), frequency of 2.66 Ghz Intel Core 2 Dup, NVIDIA GeForce 9400 256 MB - no reason apparent other than a mouse click randomly, the computer freezes for anything between a few minutes and maybe 15-20 minutes.  Then, he thaws and answer to all clicks made while it was frozen.

    I started in 'safe' mode and disconnect all external devices.  It occurs again, but perhaps to a slightly lesser degree.  The overall reaction is slow, with simple activities, taking a lot of time.  for example to move a small folder to a new location, took nearly a minute to complete.  Ejection of an external drive, took a minute to complete etc.

    This started when I upgraded to El Capitan and has been progressively worse since then.   All ideas are welcome please?

    try to get etrecheck and run it and post the result

    seems that people usually the advice of people like you to do, then probably someone

    with exp in interping those know what components are

  • IMac 24 inch early 2009 as a display of macbook air 2012

    I want to use the Imac 24 inch early 2009 version as a screen for my macbook air 2012? I don't know if it will work?

    Thanks for the help!

    No, your early 2009 is too old. The first iMacs that could be used are models 27 "late 2009 through the use of your iMac as a display with the target - Apple Support Display Mode

  • What is the speed for OS 10.10 on 13-inch, early 2009

    My 13-inch, Early 2009 MacBook runs with OS 10.9.5 basically OK on speed, and it's a very good, loaded with the fine software is useful but old and slow sometimes with all additional popups and deflect and is very nervous about the links I don't want and mail that I didn't delete.

    The system is pushing me to the update/update 10.10 and I continue to resist the Apple push, the fear of losing what I have and I'm really happy with.

    I was looking for the answer among existing similar concerns, but did not get the simple answer and clear what will I win by the new OS 10.10.

    My fear is real or just scared?

    Apple has removed 10.10.5 and 10.11.5 from the App Store, so only your option upgrade is 10.12.

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • Upgrade memory for Tecra CDT 550

    I have a toshiba tecra 550 CDT laptop with 64 MB of RAM.

    I want to migrate the RAM.

    Memory expansions I could install and what is the maximum size of the memory?

    Thanks for any help.
    Jochen

    Hello

    Well, as I know you can upgrade memory for max 160 MB.
    I found information on this module and it is compatible with your laptop:

    16 MB RAM Part number: PA2039U
    32 MB RAM Part number: PA2043U
    64 MB RAM Part number: PA2044U
    128 MB RAM Part number: PA2054U

    Good bye

  • Cards 8 GB memory for a 27-inch mid-2010 iMac will work in a 2015-2016 iMac?

    27-inch iMac have two cards of memory of 8 GB installed in my current mid-2010. Can I transfer them to a new iMac 27-inch Mid-20i5

    No, bad speed.

  • help upgrade memory for laptop

    I'm trying to understand the amount of memory can handle my notebook?

    I have a small plus (2009) laptop HP Pavilion entertainment dv4t-1400, I originally bought for writing. He came with, and currently, 4 gigb of memory.

    is the product number: LV 244AV

    Whenever I go to one of the recommended sites to check the upgrade memory, I don't see my model in the list, so I don't know if this means that his already maxed out at 4 or not?

    I want maximum memory for more speed for now and its too slow, I installed PhotoShop CS6.

    Thanks for any assistance, Lily Marie

    I had already tried and did not find my phone model, but I tried again and this time I called them and they helped me to understand. pays the persistence, 2 slots, 8 GB thanks, now to install

  • Question about the upgrade memory for my Satellite M40-307

    Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

    Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

    Since no one wants to answer:
    1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
    2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

    The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
    you could:
    3. Add a 512 MB of RAM of the same type you have
    3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

    You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

    If you have lost your manual, you can download it here on the toshiba Web page

    I hope I could help a little.

  • Installation of the 4x8Go memory modules on Mac Pro early 2009

    Can I install 4x8Go registered memory modules on Mac Pro 5.1 firmware installed early 2009 Mac Pro?

    I installed 4 modules, system preference, however installed 3 modules and 1 location of vacuum with the Red of error ON the CPU board memory.

    If you rearrange the same empty watch housing RDIMMs?

    If you use only two RDIMMs can you do this job to see the slow?

    What specific memory do you have?

    This

    http://eShop.MacSales.com/shop/memory/Mac-Pro-memory#1066-memory

    shows that only 16 GB DIMMs is registered.

  • Pavilion p6608f: upgrade memory for p6608f

    Hello, my Pavilion p6608f came with 4 GB of RAM. I want to upgrade. By HP features, the motherboard is a MSI ms-7613 and it should support up to 16 GB of RAM (4 x 4 GB DIMMS). I bought 4 DIMM which seem to fit specifications, but the computer wouldn't POST after installation. I tried reseating the DIMMs, but no luck. My hypothesis is that the memory is not compatible.  I'm unable to find good information on the compatible memory for this computer on the site of Kingston, MSI site, or the site of HP. (Any ideas on one) why the memory I bought is not compatible and b) how to find compatible memory?

    Thank you.

    Saw that Crucial guarantees their recommendations, I'd go with it.  You may contact their Customer Service to see what they have to say if you are still skeptical.  I have recommended Crucial memory for years without reports of incorrect memory being received.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Upgrade memory for Portege M400

    I recently tried to upgrade my laptop Portege M400 the original 512 MB of ram to 2 GB (which seems to be possible according to the user manual.

    I tried to install the memory standard DDR2-533 (I install 2 x 1 GB). However, when I tried to reboot the computer with the new memory of the hard drive does not recognize the new memory and I had to involve someone with more expertise than me IT. After that I tried to replace the original memory in the computer the hard drive also failed to recognize that and laptop computer were to restore to factory settings before windows would load again.

    Can anyone tell me what type of memory should I install? Y at - it Toshiba specific memory that must be installed in the system? And finally, can I just pick this of any toshiba dealer?

    Thank you

    Hello

    Without much written, I can post modules compatible memory for your laptop model:
    PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
    PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
    PA3512U-1M1G(DDR2-667 1GB Memory Kit)
    PA3513U-1M2G(DDR2-667 2GB Memory Kit)
    DDR2-533 256 MB (PA3389U - 2M 25)
    512 MB DDR2-533 PA3412U - 2 M (51)
    1 GB OF DDR2-533 (PA3411U-2M1G)

    Your laptop can handle with 4 GB RAM max. If you want to order memory simply use PAxxx part number.

    Bye and good luck!

  • Upgrade memory for Tecra A5

    Hello, if anyone can help, I would be very grateful.

    I have a Tecra A5 that I bought a few years ago and recently it has become quite slow. On the suggestion of a colleague, I rebooted the machine, remove a lot of unused programs and it seems to have improved.

    However, I would like to upgrade the RAM. Currently, the task manager tells me I have 1 GB of available, and I read that the Tecra A5 can handle 2 GB, which seems likely to boost performance.

    However, looking at the manual and at the bottom of the laptop, it only seems to be a slot to expand memory. Looking at websites selling RAM upgrades, there only seems to be 128, 256, 512 and 1024 MB memory upgrades.

    Here's the question. Should I buy two memory upgrades 1 GB (and if so, where did I put the other?)

    I have a feeling that when I bought the laptop, the seller has provided two upgrades memory of 512 MB.

    Thanks for any advice on this.

    You are right. Your Tecra can be upgraded up to 2 GB. Compatible RAM module has PA3313U-2M1G part number. Are you a location is available downstairs?
    This old Tecra is unknown to me, but what I do know, is that all laptops with a RAM slot at the bottom have an another slot memory under the keyboard.

    If you want to have full access to this slot machine, you must remove the keyboard.

  • upgrade memory for envy quad 15 t-j100

    I'm lookin to upgrade the memory of my laptop and apologies if this has already been resolved, I tried to look through the forum.  I have an Envy 15 t-j100 Quad with the 4700mq processor.  The vehicle currently has a single 8 GB 1600 mhz, cl11, 1.35v sitck.  I thought to upgrade to 16 gb 1866 MHz cl10, 1.35v.  Here is a link  That, or 16 GB 1600 mhz cl9, 1.135v.  The 2nd link

    My main question is: this upgrade would be compatible?

    It would be the first time that I am trying to upgrade the memory and never changed anything about it either in the bios before (just learned about xmp profiles the other day).  It is my understanding that the bios are locked anyway to prevent any form of manipulation of xmp.  Would it cause problems if mhz or case values are different from the memory of the stock?  And which expect the extent of performance without being able to access the xmp profile settings?

    Thank you, and other suggestions are very appreciated.

    Auto-detect and configure the BIOS but within the limits of the system. Yes, you're understanding just what I say. Even if you put the faster memory or lower latency, if it works at all downclock motherboard will it. What you put in, install identical modules. You will get on a 10% increase the speed of im with dual channel memory and you have only two channels if you have 2 identical bars. So if you add another gig DDR3-1600 8 SO-DIMM you will speed up memory and more access to get more memory for multitasking, etc.. This is the page for Kingston:

    http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=ENVY%20Notebook&Model=86577&Description=Kingston_System_Specific_Memory_for_HEW_ENVY_Notebook_HP/Compaq_-_ENVY_Notebook_15t-j100

    You have an SSD drive? I see that the system can come with a 5400 RPM or hybrid disk 5400 RPM and that is where the bottleneck. If you install an SSD you will think that you have upgraded the CPU and memory and died and ascended to heaven. If you need help with this post back. It is not cheap but you looked already expensive memory.

Maybe you are looking for

  • Questions about the Satellite 1675CDS

    Just acquired a used laptop from Toshiba Satellite (1675CDS) and I was wondering if anyone knows: 1. what port replicator model will fit it?2. What is the biggest HARD drive I can install it?3. What is the maximum RAM I can install?4. where can I fin

  • HP Photosmart C309 all-in-one think it's out of paper

    It is a question about the system of my father. It uses a wireless HP Photosmart C309 printer and the Windows XP operating system. Even if there is paper in the printer, it gets a command prompt telling him that it is paper. Despite this, the printer

  • How can I turn off hide automatically for toolbars?

    The toolbar that appears at the top of the cover page disappear through a masking function automatic I don't know how I turned.

  • Buy Windows 7 license

    I want to buy a product of Windows 7 64 bit, but everywhere, it's windows 10 banners posted by SM. Can someone help me with a link where I can move forward. Kind regards JAY Goel

  • Select and hide the query

    In Photoshop CC when I use select and hide the 'onion skin' filter does only rarely. Any suggestions as to why this could be?