Upgrade memory for Satellite Pro 6000

Can anyone help? having trouble getting the straight bar.
I tried Uk Crucial, sent bad module. I tried logical Orca, was sent bad module.
The manual says to use PA3126U - 1 M 12: 128 MB part number only. Anyone know where I can get this?

Hi Bob

I found this memory module compatible info for your unit is:
PC133 512 MB (PA3108U - 1 M 51)
PC133 256 MB (PA3086U - 1 M 25)
PC133 128 MB (PA3085U - 1 M 12)

You can order from service partner in your country and also by some portable online parts dealer. Google around and you'll find a lot of online stores where you can order. You can also try your local dealer.

Good bye

Tags: Toshiba

Similar Questions

  • Upgrade memory for Satellite Pro L10

    Can I add 512 MB to 256 MB of memory already on my laptop? And also what is the name of the memory supported by Satellite Pro L10.

    Thanx
    Femi

    Hi Fernando,

    Your L10 has two available memory slots and will support up to 2 GB of RAM (2 X 1 GB modules).

    Check the following URL for details of compatible modules for your laptop: -.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11979&ft=m&St=3

    HTH

  • Upgrade memory for Satellite Pro L20

    I use a satellite L20 pro - PSL25E. That this PSL25E means in terms of satellite pro L20 - 102 until xxx. On the support site to keep just the numbers but not this alphanumeric expression. I need this in order to select the upgrade module suitable.
    If this can be answered, could someone tell me which module to upgrade should I choose in addition to the existing 512 MB?
    Thanks in advance

    Klator

    It of nice that you have found the laptop model after your own investigation.
    However, in my opinion the portable Satellite Pro L20 all support the same kind of memory, if it s L20-259 Pro or Pro L20-174

    The units are supported on these modules:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)

  • Upgrade memory for Satellite Pro L20 problem

    I buy a 1 GB, 200-pin SODIMM crucial (marked on the module as 1 GB 2Rx16 PC2-4200 s-444-12-A0) and added to the existing module 256 MB (marked as 1Rx16 256 MB PC2 4200 s-444-12-C3)

    I can't get the 1 GB module memory I bought the work with the existing 256 MB module. The PC will recognize the 256 MB module in each slot and it will also recognize 1 GB memory module in the other location. However, when both modules are installed the PC doesn't recognize any order they are installed in the module 1 GB. The essential tool memory online seems to think that a slot is empty when it scans the laptop, even if both slots are filled. The BIOS also reports that only 1 GB is present when both modules are mounted.

    No idea how I can get the two recognized modules?

    John

    Hello John

    I assume that there is a compatibility issue. If possible, try to get the 1 GB of Kingston RAM module or module recommended by Toshiba.

    If you have time take a look here

    By the way: 1 GB of RAM is sufficient for your laptop L20. In my opinion with 1 GB of RAM, you can work on this model of laptop.

  • Upgrade memory for Satellite Pro A60

    I would like to put in a chip memory of 1 GB in my current A60 because it has only 256 MB built in.

    When you view the pieces on the Toshiba site, it does not show the available portion. These are no longer available?

    Thank you
    Maniac

    Hello

    Compatible PC2700 1024 MB of RAM except the number PA3313U-1M1G. You can add it to existing 256 MB.

  • DVD burner for Satellite Pro 6000?

    I have a lite - on dvd slimline burner we don't work in the sp6000
    now, I want to know Witch one does not work in a satellite pro 6000?

    (DVD burner or a combination dvd/CD-RW)

    As far as I know that no engraver of DVD or combo for Satellite Pro 6000 driver is available. Download and review the Satellite Pro 6000 user manual. There are readers who must be compatible.
    I found these:
    Reader of DVD - ROM SD-C2502
    -Player CD-R/RW UJDA340
    -Drive CD-RW/DVD-ROM UJDA720
    -Drive CD-RW/DVD-ROM SD-R2102
    Reader of DVD - ROM GDR-8081

    But if you want to be 100% sure, you can contact the ASP in your country. There also order you the discs

  • How can I get a hard copy of a manual for Satellite Pro 6000?

    Hello Forum users

    My brother and I bought my father (at age 81) a Satellite Pro 6000 model PS600E-20EE1-EN on E - Bay for Christmas. There is unfortunately no manual with the laptop. I'm in Australia and my father's in the United Kingdom and he asked me to help to get your hands on a paper manual.

    As I don't know anything about Toshiba laptops or point of sale UK, I was wondering if someone could help. I tried for an hour on the net but could not find a manual to download, which seems to correspond to the above specifications. I guess I could make a phone call international to support the customer in the United Kingdom, but thought I'd try here everything first. My dad would really like a paper, in order to download manual is second best option.

    All the tracks were greatly appreciated.

    Thank you.

    Stella

    Here on this site Web from Toshiba, you can download the manuals for all Toshiba laptops.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU

    The manual of your Satellite Pro 6000, you can find in the.
    Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000

    Best regards

  • Is it possible to get the WLAN for Satellite Pro 6000

    Hello!

    I have a Satellite Pro 6000. Is it possible to get a WLAN-modul for this laptop?
    Can someone give me the room-no. ?

    Thanks, Michi

    According to the specification for this model of laptop, it must be PA3070U-7MPC.

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • The maximum size of HDD for Satellite Pro 6000?

    Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

    Is there a size limit of HD?

    Thank you
    Ronaldo

    Hello

    It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

    See you soon

  • Upgrade memory on Satellite Pro A40

    Can someone please advise what is the best place I can get a memory upgrade for my laptop Satellite Pro A40.

    I think my machine is a DDR PC2700. I'm looking for 512 MB or 1 GB.

    Thanks in advance.

    Christine

    Hello

    You will find on the A40 Pro Satellite 2 memory slots, and you can upgrade the memory for max 2 GB (2x1024Mo)

    It should be possible to use these modules:
    PC2100 512 MB (PA3164U - 1 M 51)
    PC2100 1 GB (PA3278U-1M1G)

    And

    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G

    I buy compatible parts and devices always form the Toshiba service partner in my country because I am so sure that the parts are compatible 100%.
    I also recommend you to buy the modules constitute the ASP in your country.

  • Cannot find the drivers of Windows XP Home for Satellite Pro 6000

    I have a Satellite of 6000 Pro that I can not find a driver for Windows XP pro cd to. It doesn't seem like anything is downloadable on the website of europe which will help me in the completion of the plant, that is

    Graphics and sound card drivers - I tried to download Realtek 97 driver for sound, but appears not to have taken. Does anyone know of a way to get the drivers on CD, or if there is an image that I can download?

    Hello

    All the drivers of Windows XP Home edition are available. Please see the download page again. Under product type, choose ARCHIVE.
    All that s!

  • Upgrade memory on Satellite Pro A10

    Can anyone advise me on the correct type of RAM to upgrade my Satellite Pro A10. Its a standard of 256 MB at the minute and I think to mortise in additional 512 MB next to her - but I am confused by the array of the types of memories and classifications - DDR - SODIMM etc!

    Practice with the screwdriver, but not so hot with the acronyms. A big thank you to you all out there who know the score!

    Hello

    I understand you very well and sometimes I also a bit confused because of the entire rating in the world of computing of m.

    The Sat Pro A10 supports 200-pin PC2700 (333 Mhz) DDR SODIMM modules and you can upgrade the memory on this laptop up to 1024 MB (2 x 512 MB)

    You can check this page of the memory module:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=21046&ft=m&St=3

  • Upgrading memory on Satellite Pro L40 - 15A

    Hello

    I have the Satellite Pro L40 - 15A with 512 MB of memory (Samsung), but I'm not going to 1 GB. I have Kingston ktt667d2 / 1 g I tray to put into the two slots, but nothing works I can't spend on computer.

    But when I change to old laptop is ok. What can I do? Install special program update the BIOS, or maybe the memory stick is broken.
    Concerning

    Hello

    Safe computer laptop doesn t after upgrading memory due to these different problems;

    -memory modules are not compatible set
    -memory modules are not compatible with the laptop
    -memory modules are defective
    -a memory slots is defective

    In most cases, replace the memory module helps.

    A hint; have you tried to move the modules of memory in the slots? Sometimes it helps.
    A few weeks ago I updated my memory and safe laptop didn t.
    I thought that it s a malfunction of memory, but after the switch module Notepad started successfully.

    Good luck

  • How to upgrade RAM for Satellite Pro 4300 Series

    Hello
    I own toshiba satellite pro 4300. He now has 128 MB of RAM.
    As it becomes very slow, I want to improve it with additional 128 MB.
    The problem is, I'm not an expert in this stuff and don't know how to do it. I have a friend gave me the extra RAM, but as I have lost the user manual, I don't know exactly how to do the upgrade.
    I will be grateful if someone can help me. Please consider me as a "dummy" in the explanation. :-(
    Thanx

    Ognian

    Hello

    As Lucky said already support memory Expansion can be found in the lower corner of your laptop and it is fixed with two screws. I hope you have the module that is compatible with this unit.

    I found the info that Ram module with the PA3005U part number is good.

    Good bye

Maybe you are looking for

  • Qosmio X 70-A - Blu - Ray drive randomly beeps

    The Blu Ray player is beep randomly while the laptop is on - this happens if used or idle with nobody near him. Happens about every 2 minutes - starts to drive me crazy. Any ideas anyone?

  • Why the other won't recognize my bluetooth devices?

    I thought that the iMac (early 2015) retina 1 Air iPad and the 6sPlus must recognize each other via Bluetooth? Now, of course, everything is linked to iCloud, and while all three devices 'see' each other, none of them will be "pair". I guess there is

  • How to use the Call executable to run a ping command?

    Hello I use TestStand 2014 and that you want to use the executable call to open cmd.exe and run ping 127.0.0.1 To do this, I currently inserted C:\Windows\system32\cmd.exe to the path of the file and "ping 127.0.0.1" to the Expression of Argument. Bu

  • How to use extern Code in LabView / cRio

    Hi guys,. After that I had created a Matlab/Simulink model, I use the model Interface Toolkit to generate a library of VxWorks file (.out) because I want to import this model on a cRio-9024. So I copy the library of VxWorks for the cRio (/ nor-rt/sys

  • control 3540i

    Hi all I am trying to achieve simple continuous backward motion with a linear actuator controlled by a 3540i applied Motion stepper drive but I am out of luck. It works the first couple of iterations, and then he starts ignoring orders and behave err