Similar Questions

• After the upgrade of the APEX 4.2 to 5.0 problems with static files

  Hello

  After the upgrade from 4.2 to 5.0 works of apex APEX (Apex runs on thothgateway 1.4.1 Morten Bråten.) but once the connection I get this message: "there are problems with the configuration of static files in your environment. Please see the section "Configuration static file Support" in the application Express Installation Guide. "and the page designer says"no page or page has no templates".

  OTN I found only advice for APEX with ADR.

  I tried to apex_rest_config and apex_epg_config.sql but without result.

  Apex works on thothgateway Morten Bråten 1.4.1. (I know: it is not supported.)

  Best regards

  Marco

  Hi Marco W.

  In the "Setup Guide" to "Thoth Gateway 1.4.1" go to 'step 3.' Configuration of DAD' and change/add the parameter:

  • PlsqlPathAlias the r value
  • The value PlsqlPathAliasProcedure wwv_flow.resolve_friendly_url

  Re-start the Middle Tier and check.

  It is of note for OSH who said:

  Note:

  PlsqlPathAliasand PlsqlPathAliasProcedure are required new parameters that must be added to an existing DAD. This is important when the upgrade to Application Express version 5.0.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/http_server.htm#HTMIG29263 (see the note below point 2)

  Kind regards

  Kiran

• Problem with the upgrade of 5 Apex

  Dear friends

  I installed oracle11g XE and then upgraded to apex ver5

  I run the command

  SQL > @apexins SYSAUX SYSAUX TEMP is

  SQL > @apxchpwd

  SQL?@apxldimg e:\

  After that when I run via google gives below error. Please resolve. I will be thank ful. Concerning

  

  Hi Kam_oracle_apex,

  Kam_oracle_apex wrote:

  Hi Patrick

  There is no such thing as no. d:\apex\images. I did apex5 folder on the D drive.

  So, how do you load images in XDB and the apex_epg_config.sql to work properly?

  No need to create the folder anywhere, not extracted from the apex_5.0.zip to the D drive. The actual path would be D:\apex\images.

  The apex_epg_config.sql requires the path where the apex_5.0.zip has been extracted and that will be the D drive.

  On the command line go to the D:\apex and connect to the SYS user with SYSDBA privilege. Then type the following command:

  SQL> @apex_epg_config.sql D:
  

  The apex_epg_config.sql script configures the EPG and load installable images from APEX to XDB.

  I hope this helps!

  Kind regards

  Kiran

• Upgrade of the APEX late

  Good day to you all:

  Today, finally, after fighting my boss for 3 years, I will be upgrading APEX 2.1 (YES, I YOU READ RIGHT) at APEX 5.0.

  Are there specific issues I should know about?  Should I upgrade to 4.0 first, and then to 5.0?  Am I at risk of losing functionality or custom applications that have been built in 2.1?

  Thank you all for your help.  I really appreciate the many of you.

  Kind regards

  Aqua

  Hi AquaNX4,

  AquaNX4 wrote:

  Today, finally, after fighting my boss for 3 years, I will be upgrading APEX 2.1 (YES, I YOU READ RIGHT) at APEX 5.0.

  Are there specific issues I should know about?  Should I upgrade to 4.0 first, and then to 5.0?  Am I at risk of losing functionality or custom applications that have been built in 2.1?

  Thank you all for your help.  I really appreciate the many of you.

  First of all congratulations you could convince your boss for the upgrade!

  There is a big difference between the functions of APEX 2.1 and APEX 5.0.

  I suggest you go for the incremental modernization (although you can go directly to APEX 5.0). The steps are:

  • APEX 2.1 updated 4.2 of the APEX.
  • APEX to APEX 5.0 4.2 upgrade.

  Please make a backup before each test in-depth applications and updated after each update.

  Until you have completed the first step of the upgrade, I think dust will settle questions about the APEX 5.0 upgrade.

  I hope this helps!

  Kind regards

  Kiran

• HTP.p does not like usual after upgrade to the apex 4.2.6

  Hello everyone,

  We have recently upgraded the Apex 4.0.2 on Oracle 11 g using Embedded PLS door of entry to the Apex 4.2.6 on Oracle 11 g using ADR.

  The initial series of unit tests seemed well until a few questions supported around "htp.p".

  The scenario is like this:

  1. the user fills some fields on the page-10 and click the Save"" button.

  2. This button then performs a redirection to a pop up page where some inputs more are invited to enter.

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend (as after presenting processes).

  II. another PLSQL block is executed, which closes the popup windows and returns the control to the parent page.

  This is achieved using htp.p...

  For example:

  HTP.p ("< body > '");

  HTP.p ("< script type =" text/javascript "> '");

  HTP.p ("var alertMsg =" &. P38_PO_AMOUNT has been paid";");)

  HTP.p ('javascript:Alert (alertMsg)');

  HTP.p ("window.opener.location.href =" f? p = & APP_ID.:7: & SESSION.) " ;") ;

  HTP.p('window.) Close (this);') ;

  HTP.p ("< /script >" ");

  HTP.p ("< /body >" ");

  The anonymous block under step 3.i. is well executed and done what it takes in the backend.

  Its the next step which is driving me crazy, I tried to add debugging but to no avail.

  The weird part is that the message "& P38_PO_AMOUNT. has been paid' getting appears on the pop-up itself instead of parent.

  Any ideas or pointers to this problem would be a great help. I have come to the forums and metalink for any position and had no luck so far.

  Kind regards

  Madhu.

  Hi Sunil,

  Thanks for the reply and apologize for the delay in responding.

  But 2 doubts which do not appear in your code:

  1. why you placetag through PTH again? Body will be already present on the page 7

  2. What is "this" in your window close event? 'this' will be indefinite in my opinion

  Thetag and the reference to 'this' was used because the application was developed first on Apex 3.x

  This piece worked through the upgrade to 4.0.2 and it starts to play up only after this upgrade (to 4.2.6).

  I had followed the suggestions from the link you posted, made some changes and the flow is as follows:

  1, as well as the original

  2 as well as the original

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend, under process, like submit it: after calculations & Validations.

  II. the 2nd block PLSQL for close & redirect the page is now part of 'Branch of PL/SQL procedure' with branch point ' on Submit: after the treatment (after calculation, Validation and treatment). The PLSQL code is as follows:

  BEGIN
    htp.p('');
  END;
  

  The behavior is always the same and seems not to have changed. I'm a little lost, try different options.

  I'll try to reproduce the scenario on apex.oracle.com and in the meantime of inputs/suggestions would be helpful.

  Kind regards

  Madhu.

• determine the storage space for the upgrade of the APEX

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  
  

  How can I determine which user is the " " " User of the oracle Application Express application" and which the user is the user Oracle Application Express 'files' (if I can then watch their default storage spaces)?

  
  

  
  

  Hi Mimi Miami,

  Mimi Miami wrote:

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  How can I determine which user is the user Oracle Application Express 'application' and that the user is the user Oracle Application Express 'files' (so I can then look at their default storage spaces)?

  APEX 3.2.x installation that follows is users:

  • Oracle Application Express Application user: APEX_030200
  • Oracle Application Express user files: FLOW_FILES

  So to determine the tablespace_apex and the tablespace_files you must connect with the user sys with sysdba privilege and run the following query:

  SELECT USERNAME
       , DEFAULT_TABLESPACE
    FROM DBA_USERS
   WHERE USERNAME IN ('FLOWS_FILES','APEX_030200')
  

  Then use the APEX_030200 user as tablespace_apex tablespace and a tablespace of the FLOW_FILES user as tablespace_files.

  I hope this helps!

  Kind regards

  Kiran

• After the upgrade of the APEX 4.2.0.6, I don't see any change

  Hello

  I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.

  When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?

  SQL > SELECT username

  2 FROM dba_users

  3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')

  4 AND USERNAME NOT IN)

  5. SELECT "FLOWS_FILES".

  6 DOUBLE

  7 UNION

  8. SELECT 'APEX_PUBLIC_USER' FROM DUAL

  9 UNION

  10 SELECT SCHEMA s

  11 FROM dba_registry

  12 WHERE id_comp = 'APEX');

  USERNAME

  ------------------------------

  APEX_030200

  I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839

  Thank you for your help.

  Christian

  Hi Christian,

  chipniz wrote:

  Hello Kiran

  I redid all installation steps and found that I now have this error:

  Service temporarily unavailable

  The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.

  When are you facing this error?

  • Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
  • Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)

  What kind of error is it?

  • HTTP error with an error like 404 code
  • Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)

  What is the type of the OHS?

  • Oracle Application Server 10g
  • Oracle HTTP Server distributed with Oracle Database 11g

  Finally it is part of your question:

  When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  What did you mean by that?

  • You receive the login for the old version screen
  • You receive a blank page

  I would like to you check the following things:

  • Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
  • Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
  • Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI

  I hope this helps!

  Kind regards

  Kiran

• Upgrade of the apex

  Hi all

  I'm upgrading application 3.2-4.0 Apex. I wrote about a few pages of javascripts. Do I need to recreate the javascripts after migration? Can anyone also let me know the things to be supported during the migration.

  Thank you

  Zourk

  Hello

  I guess you have JavaScript files or you have functions of writing somewhere in the page or the page template.

  There is no need to recreate them.

  Why switch to 4.0? There is already a version 4.2.

  Before the upgrade take backup full, and then follow the official instructions.

  Kind regards

  Jari

• Email does not work after upgrade to the APEX

  Operating systems: Windows 2003
  DB: 11 GR 1 material
  
  E-mail no longer works for users after upgrade from 4.0 to 4.1. New APEX_040100 'main' added to the ACL as well as the main APEX_040000 of the previous version. In fact, the two still exist in the ACL.
  
  Error code in the APEX Admin Mail queue: ORA-24247: access denied by access control (ACL) of network list
  
  What could be the cause of the installation of electronic mail within the APEX to not work?
  See you soon!

  See what {message identifier: = 10355015}

• Upgrade of the APEX v3 for 4 issues

  Hello
  
  I am trying to improve Apex v3 to v4, and we have the following questions:
  
  * The buttons do not work (doesn't do anything when you press on)
  * The show change the links appear automatically, and the arrows of edit link appear blue.
  * The values not being saved on the session.
  
  I exported the application and imported into the oracle development forum and everything works fine.
  
  We get the following error when you use IE;
  
  Webpage error details
  
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2;. NET4.0C;. NET4.0E)
  Timestamp: Tuesday, February 1, 2011 22:50:26 UTC
  
  
  Message: "apex" is not defined
  Online: 73
  Char: 1
  Code: 0
  URI: http://pcaapex01.pca.ad:7777 / pls/apexdev/f? p = 101:2:798892704964590:YES
  
  
  Any help will be appreciated.
  
  Thank you.

  My guess is the IMAGE_PRIFIX too. We had the same problem. I created a separate instance to upgrade our dev environment and changed the Image directory for versions 3 and 4 of Apex to use the same Web server. All you need to do is change the directory of the image, go to components that are shared for the application. Then, definition, change the prefix of Image on this page.

• Apex 4: Upgrade of the Apex in Oracle XE

  Hello
  
  This post is for the team of the Apex.
  Is it possible that instructions to upgrade Apex to the XE found under link is updated to include the step to upgrade OWA_UTIL?
  http://www.Oracle.com/technetwork/developer-tools/Apex/upgrade-Apex-for-XE-154969.html
  
  
  Kind regards
  Jari

  Hi Jari,

  Thank for reporting! I have informed our MP on this subject.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Moved to the new server and updated applications upgraded to the APEX, 4.2.6.00.03 and get the random error when using IE 11.

  Hello

  I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.

  When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.

  

  There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.

  The error does not appear when you access applications through Chrome, but not all users have installed chrome.

  Thank you

  Ronnie

  Well Ronnie,

  This thread suppose to have a problem like yours and resolved. Please try on your side:

  After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');

  Please Urgent help on ora_sqlcode :-28500

  It will be useful.

  Thank you

  Sunil Bhatia

• upgrade of the apex 4 to 4.1 facing issues such as the protection of the State of Session

  I have some areas that are read-only... But when I save it
  so I'm dealing with protection of session error
  
  Session state protection violation: this can be caused by manually editing the protected page P103_empid point. If you don't know what caused this error, contact the administrator of the application for assistance.
  Communicate with your administrative application
  
  
  Then when I change the p103_empid_no of the text field and remove the read only status
  so I'm able to save...
  If I make one point only display too he recorded record successfully. and the value of session state... then saves it
  but the p103_subscriber_no do not value go to the required table...
  Anyone has a work around on this please let me know
  
  What I do is I use oracle xe version 4 which has been upgraded to 4.1
  This page is called from another page... I'm feteching empid value on the page, hence it is called
  That is to say... Page 10 that has empid inside value...
  
  Published by: user12233760 on October 2, 2012 01:08

  Ahh well that explains it, you can not have session state on protection and then change a value of field using Javascript or dynamic action. I have stop any dynamic action on the page and try again just to try to confirm that it is the root of your problem.

  These 2 threads will help:
  https://CN.forums.Oracle.com/forums/thread.jspa?threadID=2383592
  https://KR.forums.Oracle.com/forums/thread.jspa?threadID=2362573&start=0&TSTART=0

  Thank you

  Paul

• Upgrade of the apex 4.02 3.02 on Linux RH 11 g - no image can not connect

  I got a job installing 3.x Apex Oracle under Linux 11 g and unzip the zip apex 4.02 in/home/oracle/apex
  
  Now I have a successful installation (valid said dba_registry query).
  When I go to the URL of apex who worked 39 minutes ago now, I get a login screen Apex 4 broken images and any attempt to login as the admin user fails (nothing happens and I get an 'error on page' at the bottom left of the browser.
  
  I ran
  / Home/Oracle/apex > sqlplus / as sysdba @apxchpwd.sql
  
  SQL * more: Production version 11.2.0.1.0 Fri Nov 19 18:09:53 2010
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  Enter a lower value for the password for the user of the Application ADMIN Express.
  
  
  Enter a password for the ADMIN user]
  
  Modified session.
  
  .. .the ADMIN password
  
  PL/SQL procedure successfully completed.
  
  
  Validation complete.
  
  Niku > change the APEX_PUBLIC_USER user account unlock;
  
  Modified user.
  
  Niku >
  
  
  Still no joy.
  
  
  
  Any help apprecioated

  George,

  So it seems that we found the error: you have forgotten a parameter in your @apexins call, that's why you saw the query, where you entered '2 '. The documented call is as follows:

  @apexins tablespace_apex tablespace_files tablespace_temp images
  

  You have entered the corresponding values for tablespace_apex and tablespace_files, but you don't provide a value for tablespace_temp. So what happened, the installer took your + / i / +, that you wanted to have prefixed images, for the tablespace_tempand then asked you to enter the value for the prefix-pictures later - that you set to be '2 '.
  I wonder why the installation worked with the + / i / + for tablespace_temp, but I guess that in the case that the tablespace does not exist, the default tablespace system is used.
  If that's true, all you have to do now is to reset the image prefix. Go to utilities- subdirectory of your APEX-installation environment (where you unzipped the installation package) and run

  @reset_image_prefix.sql
  

  as sys. You will be asked to enter the new value for the prefix-images, which should be + / i / +, and once all references have been updated, you should be able to see a correct login screen.

  -Udo

• Upgrade of the Apex 3.2.1 (mod_plsql) at Apex 4.0 with Oracle Listener

  Hello
  We have a few applications in the Apex 3.2.1 (i.e. mod_plsql) which have not been displaced in Production yet. We intend to move to Apex 4.0 with Oracle listener as soon as they are available (we don't want turn on any web server mod_plsql). What will be the migration process? My apps work and look the same when I opened the Apex 4.0? All the features, formatting, etc. will be lost?
  I heard that there is a Migration Wizard, but there is no information available.
  
  When Apex 4.0 and Oracle Listener comes out? Summer 2010?
  
  I would be recognizing all of the information you have on this subject.
  
  Thank you
  Violeta

  A new Forum OTN has been implemented for the listener of the APEX: ADR, SODA & JSON in the database

  Please use this forum for all future APEX auditor positions.

  Kind regards
  David