Upgrade of PeopleTools to 8.54 8.51

Similar Questions

• PeopleSoft PeopleTools model

  Hello
  
  Please let me know where I can find Peoplesoft PeopleTools Upgrade Template for PT50.27.
  
  I couldn't find the model in downloadable. It is a separate download?
  
  Kind regards
  Vikas
  
  Published by: 973585 on February 5, 2013 23:14

  You want to upgrade to PT8.50.27 or you upgrade a PT8.50.27?

  Models can be downloaded here:

  If you want to upgrade to PT8.50.27:
  Home Enterprise PeopleTools 8.50 Upgrade [889204.1 ID]
  https://support.Oracle.com/epmos/faces/DocContentDisplay?ID=889204.1

  If you want to upgrade to PT8.50.27:
  Home Enterprise PeopleTools 8.51 Upgrade [1196626.1 ID]
  https://support.Oracle.com/epmos/faces/DocContentDisplay?ID=1196626.1

  Upgrade of PeopleTools 8.52 homepage [ID 1362049.1]
  https://support.Oracle.com/epmos/faces/DocContentDisplay?ID=1362049.1

  Homepage of 8.53 PeopleTools upgrade [ID 1520927.1]
  https://support.Oracle.com/epmos/faces/DocContentDisplay?ID=1520927.1

• PeopleTools update does not start

  Hello
  
  Try to upgrade the Peopletools (at 8.51.10) the last PSOVM FSCM FP1 Peopletools 8.51.07, I can't start the configuration:

  [psadm1@psovmfscmfp1 Disk1]$ export DISPLAY=0.0  <-- it is indicated in the Peopletools 8.51 patch 10 document
  [psadm1@psovmfscmfp1 Disk1]$ ./setup.sh -is:tempdir /tmp
  Setting temporary directory /tmp/IA.2145
  Executing setup.linux   -is:tempdir /tmp -DPS_UMASK=0022
  Preparing to install...
  Extracting the JRE from the installer archive...
  Unpacking the JRE...
  Extracting the installation resources from the installer archive...
  Configuring the installer for this system's environment...
  
  Launching installer...
  
  Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)
  
  Stack Trace:
  java.lang.UnsatisfiedLinkError: /tmp/IA.2145/install.dir.2155/Linux/resource/jre/lib/amd64/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
          at java.lang.ClassLoader$NativeLibrary.load(Native Method)
          at java.lang.ClassLoader.loadLibrary0(Unknown Source)
          at java.lang.ClassLoader.loadLibrary(Unknown Source)
          at java.lang.Runtime.load0(Unknown Source)
          at java.lang.System.load(Unknown Source)
          at java.lang.ClassLoader$NativeLibrary.load(Native Method)
          at java.lang.ClassLoader.loadLibrary0(Unknown Source)
          at java.lang.ClassLoader.loadLibrary(Unknown Source)
          at java.lang.Runtime.loadLibrary0(Unknown Source)
          at java.lang.System.loadLibrary(Unknown Source)
          at sun.security.action.LoadLibraryAction.run(Unknown Source)
          at java.security.AccessController.doPrivileged(Native Method)
          at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
          at sun.awt.DebugHelper.<clinit>(Unknown Source)
          at java.awt.Component.<clinit>(Unknown Source)
          at com.zerog.ia.installer.util.BidiUtilImpl.setDefaultLocale(DashoA10*..)
          at ZeroGbd.a(DashoA10*..)
          at com.zerog.ia.installer.LifeCycleManager.s(DashoA10*..)
          at com.zerog.ia.installer.LifeCycleManager.b(DashoA10*..)
          at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
          at com.zerog.ia.installer.Main.main(DashoA10*..)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
          at java.lang.reflect.Method.invoke(Unknown Source)
          at com.zerog.lax.LAX.launch(DashoA10*..)
          at com.zerog.lax.LAX.main(DashoA10*..)
  This Application has Unexpectedly Quit: Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)
  [psadm1@psovmfscmfp1 Disk1]$

  If I do not display, then it works fine...
  
  Nicolas.

  I checked that it is a problem of Documentation and is not a problem with the model or the installer. The document should not State the requirement for the VIEW to define. It will be cleaned in the documentation, we followed this fix documentation internally. It remains that we must not libXext package must be installed. It is the absence (or the lack of packages upon which it depends) in the model livery is not a problem in my opinion. It would be convenient for these packages are available, but our overall goal is to be as usable as possible as well as models to have the bare minimum software delivered with them.

  MJ

• Connection Data Mover & Appdesigner problem

  Hello
  
  Enter below the error message mentioned in connection in Data Mover & Appdesigner
  
  "The database is free 8.51. The PeopleTools running require databases during the liberation of 8.52. ».
  
  This error message occurred after completing a 6-15-1 task: filling the Tables in the PeopleSoft database.
  
  Server details:
  
  Peoplesoft FSCM 9.1 Feature Pack 2 version request: V29133-01
  PeopleTools 8.52.11: Patch 14513380
  Oracle DB version: 11.2.0.1.0 - Production
  File/Batch/DB server: 2008
  
  Please advice.
  
  Kind regards
  Vikas
  
  Published by: 973585 on December 14, 2012 22:39

  As Nicolas says you need a short walk over to your PT8.51 database PT8.52.11 of preforms. Rel852n.SQL running is only a first step.
  As described in Chapter 7 finalization of database configuration of the Setup Guide of 8.52 PeopleTools to upgrade your PeopleTools to 8.52.11.

  I still don't understand that you have downloaded FSCM 9.1 Feature Pack 2: V29133-01 and that is comes to 8.51.
  I installed it a month ago and the same installation file was delivered to PT8.52.

  Rather than upgrade your current database to PT8.52.11, I would say to download FSCM 9.1 Feature Pack 2: V29133-01 new and recreate your database.
  Why do I say that?
  Because you clearly have an incorrect download and also missing patches that come preinstalled with FP2 review recut for this purpose.
  Download FSCM 9.1 Feature Pack 2: V29133-01 and recreate your database, this way you ensure that your installation has FP2 and all patches up to FP2 preinstalled. This will save you a lot of time...

  Halin

  Published by: Hakan Biroglu on December 16, 2012 14:17

• Could not find any of the links in the menu

  Hi guys,.
  I did an install of PT8.51 on Oracle11gR2 on Win2k8R2 64-bit. All scripts executed correctly. Everything went well. IAM using 2 machines i.e. one as an application server and the other as a database server. I have configured the application server and started. I have configured the PIA and I logged in it, but to my surprise I find no links or anything like that on the menu. Why does. I have to run all the scripts to assign the PS of the permissions to access the menu or what? Pls help me. What I have to do no matter what other configuration on any of the servers?

  Are you sure that you successfully upgrade of Peopletools 8.51?

  Nicolas.

• Regarding installation of the revision pack.

  Hi Nic,
  Hope you will be fine. Support team told me that I can jump packs of maintenance by application of the revision pack. So, I need your help about this management system human resources PeopleSoft Enterprise which can and Campus Solutions 9.0 - revision 1 is applied during the installation of basic HRMS and 9.0 Solution Campus? I also want to know if there is a sine qua non for this?

  As I told you in one of your previous thread, Rev may or may not include all the maintenance pack. Since some maintenance packs were delivered after revision, you must apply to them. You must read the document entering the package downloaded for more information. Delivery, the read me button opens a new page with everything you want to know, including the prerequisites:
  "+ * HRCS 9.0 - review * 1: HRCS 9.0 - Media Review 1 (part V20635-01 number) has replaced the HRCS 9.0 media (number B34591-01)." Review media 1 include all maintenance up to and including PeopleSoft HRCS 9.0 Service Pack 8. If you install support for revision 1, you have no need to separately install PeopleSoft Enterprise HRCS 9.0 Maintenance Packs 1-8 (... jumped...). All HRCS 9.0 - revision 1 facilities require PeopleTools 8.50.03 or higher. Please see the documentation for upgrade for PeopleTools needs for your specific upgrade path. + »
  This means that all the new MP should also apply. And since the MP9 and MP10 are released, you must apply them, or just the MP10 if there is a cumulative.

  Nicolas.

• PeopleTools Upgrade From 8.54 8.53 - change Wizard error when configuring the connection to the base

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  I am upgrading from 8.53 to 8.54 and have problems with the "Database Wizard" configuration screen in the wizard to change.  I use SQL Server 2012 for the database, change Wizard is running on the new server of 8.54 applications.  I use the following information when defining the configuration screen:

  Type: Microsoft SQL Server

  DatabaseName: PSHRPROD

  Database server name: PTY2DBAREH002

  User name: {AdminUser}

  AccessID: {DB user who is administrator system right now}

  ConnectID: {valid connect ID which has been vailidated}

  Current homes:

  PS homepage: \\servername\PT_853

  PS App Home: file://servername/PT_853\\servername\PT_853

  PS Cust homepage: \\servername\PT_853

  New homes:

  PS-home: D:\rootPS\PT_854

  PS App Home: D:\rootPS\PS_APP_HOME

  PS Cust home: D:\rootPS\PS_CUST_HOME

  When I clck 'Next', I get errors...

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  (1) I have validated that the path contains the path to 64-bit SQL tools.

  (2) the ODBC connection is set up under 64-bit and 'System' - it is also 32 bits of the system and user Setup, but also the 64-bit user.

  (3) I used the SQL Server sqlcmd.exe with access code and was able to connect from this machine and run the SQL commands.

  (4) I'm sure I've done the other stuff but don't remember.

  Please let me know if anyone experienced this or has any ideas.  I'm waiting on Oracle to react to the case after I opened it when their suggestion didn't work.

  Thank you

  Ryan

  I ended up working with Oracle Support, that had me do some things... I also did a thing on my own and with these changes, I am able to connect now.  If it does not please let me know... I tried a few other things that I don't think had no effect.

  (1) removed the Environment Variable "PS_SERVER_CFG" - I found in a document oracle that this could cause problems.  I have not set this manually, but Oracle says it is used to run data mover or SQR scripts outside of the process scheduler.  It must have been added as part of the installation so I'll add it again later.  This change did put a slight change to error messages, so it have some effect, but does not solve everything.

  (2) with the upgrade of 8.53 8.54 I had to add a 32-bit ODBC user DSN.  Even if change assistant 8.54 uses 64-bit, it seems that 8.53 connections are still serving who connects via ODBC 32-bit.

  (3) make sure that the paths configured in the wizard to change are not UNC, if they are matched with a drive and configure using readers.

  Good luck.

• Favorites missing after upgrade to PT 8.53.23

  Favorite with add and edit Favorites favorites are no longer visible after an upgrade of PT 8.52.06 PT 8.53.23 in our CRM 9.1 DEV environment. Under the Structure and content for the two favorites add and change references to favorite content, permission lists appear. Sync Collection security and security of site synchronization process were executed to success. If I add the role of the administrator of the portal my user profile, favorites are all here. We cannot add this role to all users. What Miss me?

  Please check the security on the folder 'My Favorites '.

  See-> E - SEC: What permissions are necessary to grant "My Favorites"? (Doc ID 664987.1)

  The 'My Favorites' menu link is a file and not a page or an ARB.  Security cannot be granted to a whitelist so that it can automatically view the 'My Favorites' folder in the left menu.  The delivered permission related to the 'My Favorites' folder list is PTPT1000.  If the granting of permissions to users this list gives too much access, a list of custom permission to provide this access.

  To grant access to Favorites Add and change the links under 'My Favorites' do the following:

  1. the list of custom permission must grant full access to the PORTAL_ADMIN menu Security page PORTAL_EDIT_FAV and hardware PORTAL_ADD_FAV.

  2. go to PeopleTools-> Portal-> Structure and content-> hidden tools.  In this case, there will be two Csrsfi: 'Add to Favorites' and ' change favorite.  In these two, make sure the custom permission list shows under the tab 'security '.  It should be here, because access was given through the permissions list.

  3. navigate to PeopleTools-> Portal-> Structure and content.  Click on 'Edit' on the record 'My Favorites '.  Look at the Security tab and make sure that the custom permission list shows here.  If it is not the case, you must manually add the list of permissions.

  The folder 'My Favorites' must always be manually updated and running synchronization of security portal will not grant this access.  Another option is to make the 'My Favorites' folder 'Public' so that all users can see this folder, and security settings are not required for the folder.

• PeopleTools 8.53.22

  We will be upgrading our worm PeopleTools 8.53.06 to 8.53.22 in the next 2 months.  (We will be upgrading to version 8.54 in about a year)  PeopleTools 8.53.22 is stable?  Are there any known bugs or "traps" with this version?  Are also the latest critical updates included in the PeopleTools.  We are on PeopleSoft 9.2.02.  Any suggestions or ideas are appreciated.

  Thank you

  Hello

  While I can't answer your question directly, I'll provide as much information as possible.

  Like all changes to the code, a patch of tools (8.53.06 to 8.53.22) requires extensive tests in your environment.  I understand that you request a general "is everyone else happy with this version', but the truth is nobody else is likely to use exactly the same way you are.  At the same time, an application of the patch has much less risk than the upgrade (e.g. 8.53 to 8.54).  However, I have been using 8.54 all this year and highly recommend you just patch your version of the tools.  It is good that you planned, but surely the effort you spend on the patch tools would be replicated in the upgrade, so you would get more advantageous to put this effort in upgrading earlier (possibly skip the patch altogether).

  In addition, as a general rule, higher versions of patch are usually more stable.  In my view, there was enough of a problem with 8.54.04 when it came out, but 8.54.08 is out.  By patch 08, I expect all underlying traps to have been ironed out.  I realize that this is in a bit of a ghost waiting - as I have little knowledge of bugs accurate as long as they are fixed - however higher patches are less likely to implement changes to the basic elements, that these changes will simply be moved to the next version.  I know 8.55 features already spruiked, is now the case for 8.54 as well.

  So ultimately, while I have no experience of 8.53.22, so I have it 'should' be stable.  I also recommend that bring your upgrade tools to the front if you can - especially if that means that you can ignore the effort to patch tools.

• Projects to compare a tools only Upgrade

  Team,

  I would like to know on what are the projects that are supposed to be compared a Peopletools Upgrade only.

  Thanks in advance.

  Take a look in your database for the project named PPLTLSxxCUR and PPLTLSxxCURDEL (where xx = 84 for 8.4 x tools).  Also look for projects named PATCHxxx (e.g. PATCH854) for the latest patches of tools.

  Please note that many of the contained objects have no relevant compare reports and some of these objects may also be imported using Data Mover scripts, rather than project imports.

• PeopleTools8.53 upgrade problems

  Hi all

  We intend to implement a peoplesoft 9.1 to 9.2 and peopletools 8.52 to 8.53 peoplesoft upgarde. The current tools of people of job java version 1.6. Our new version of PeopleTools (8,53) comes with Java version 1.7,is it possible to upgrade to Java version 1.8 during your stay on PeopleTools 8,53?

  Hello

  You must use Java version 1.7 with PeopleTools8.53 (Java version 1.8 is not certified for use with PeopleTools 8,53)

  -Karen

• PeopleTools has stopped working

  Hi everyone, someone has met the above message when trying to open the designer for the app or Data Mover?
  
  We currently perform a PT8.47 to PT8.51 peopletools upgrade, I was able to run the application PT847 and Data Mover earlier, but after trying designer to run the UPGCOUNT app engine via command line, I encountered the error "Peopletools has stopped working". After receiving the error, I now cannot open the appdesigner and the Data Mover for PT847. The app designer and Data Mover for PT851 is OK.
  
  We are on Windows 2008 R2 64 bit, Oracle 11.2.0.3 and as directed by the engineer, oracle, pt847 should work on this version of windows.
  
  We have re-installed PT847 and restarted the server, but still encountered the problem. Please notify.

  974596 wrote:
  ...
  We are on Windows 2008 R2 64 bit, Oracle 11.2.0.3 and as directed by the engineer, oracle, pt847 should work on this version of windows.

  I don't think so. According to the note * PeopleSoft Enterprise PeopleTools PT 8.47 Certifications [749107.1 ID] * + - only 32-bit Windows XP Pro, 2003 and Vista are supported as a client of this version of Peopletools.
  In addition, Oracle 11 g is not supported nor (the highest version is 10.2.0.4).

  Nicolas.

• How to change the PS_home while making people upgrade tools

  Hi all
  
  I hope that all are doing well,
  
  I use peopletools 8.45 in windows environment, now I want to upgrade the upgrade of the tools people
  from 8:45 to 8.50
  
  This is my PS_home, D:\PT8.45
  
  but in Peopletools document upgrade saying "run the installation of PeopleSoft program and install the software in the same directory PS_HOME.
  where you installed software 8.4 PeopleTools previous x, where x represents the output level PeopleTools
  "go where you perform."
  
  My original name is therefore, after update Peoletools D:\PT8.45
  
  How can I change my name like this D:\pt8.50 PS_home
  
  Could you please help me with this ASAP
  
  concerning
  Shiva

  Create a backup of you old ps_home first of all, of course, you can restore all changes.
  New ps_home and rename it to ps_home and install pt8.50.

  Before you start, have you checked the matrix certification? I was wondering if your current operating system is certifited on pt8.50.

• 84819 to 850 X upgrade

  Hello
  We are planing to upgrade our 84819 PT.
  Initially, we thought to upgrade to 850.08, but then, we notice that the 8.51 version is available.
  I'd like to get your opinion in what option should I take?
  Does anyone have good expirience with 851? Is - this version is stable?
  Thank you

  Since you have not yet improved, then I second Michel, skip PT8.50 and go directly to PT8.51. 6 patch was released last Friday, it should now be a production ready version of Peopletools.
  As we said already, make sure you close the compatibility matrix within the layer (client server OS, OS, database...) as well as the level of your application.
  In addition, in accordance with the plan presented during the last Oracle Open World, Oracle will release a new version of Peopletools annually, this means at the end of 2011, the PT8.52 goes out - stop patches on PT8.50, it would be a shame to be already two versions behind later.
  You are also able to test it for free without too much effort, by deploying the latest model of Peoplesoft LMOS HCM9.1 on Peopletools 8.51.02.

  Nicolas.

• How to uninstall PeopleTools 8.50 PeopleTools 8.49?

  People,
  
  Hello. I'm level PeopleTools 8.49 to 8.50. The procedure is the following:
  
  Step 1:
  Install PeopleTools 8.50 3-disc to the directory in which the PeopleTools 8.49 existing is installed (C:\PT8.49).
  
  Step 2:
  Install PeopleSoft change Assistant 8.50 and configure it.
  
  Step 3:
  Download an appropriate http://support.oracle.com upgrade model.
  
  Step 4:
  Import the model to upgrade into change Assistant 8.50 and follow the steps to upgrade 8.49 to 8.50 PeopleTools.
  
  Because I can not download an upgrade of http://support.oracle.com model, I can't upgrade PeopleTools 8.49 to 8.50. I need to recover the existing PeopleTools 8.49. So my question is:
  
  How do I uninstall 3 disks of PeopleTools 8.50 PeopleTools 8.49 (C:\PT8.49) as well as recover PeopleTools 8.49?

  I use Windows Server 2003 64-bit. I don't think 10gR 3 Tuxedo for MS Windows Server 2003 32 bit can be installed in my computer.

  However, it does. And this is the supported configuration.

  Nicolas.