upgrade of RDBMS House of 11.2.0.3 to 11.2.0.4 using OEM12c

Similar Questions

• Run 'localconfig add' home of ASM or RDBMS House?

  Hello

  I'm preparing a new Oracle - Oracle 10 g 2 on RHEL 5.8 64-bit server. Here's what I've done so far.

  1. ASM install home
  2. ASM home to 10.2.0.5 patch group and apply 10.2.0.5.8 PSU
  3. RDBMS host installation
  4. Upgrade Home RDBMS for the 10.2.0.5 patch group and apply 10.2.0.5.8 PSU

  Now, the next step is to configure the ASM using DBCA. Then I set ORACLE_HOME to point to the House ASM /u01/app/oracle/product/10.2.0/ (DSO) and run "dbca. I select "Configure Automatic Storage Management" and press "next". DBCA then asks me to run the following script as "root":

  • /U01/app/Oracle/product/10.2.0/db_1/bin/localconfig add

  My question is why DBCA asks me to run the 'add a localconfig' House of RDBMS? Is this the right thing? Should it not ask me to run 'localconfig add' ASM home?

  2nd question is: If all that advertising DBCA is correct, what happens if I run the House of ASM? Just curious to know the side effects for the sake of knowledge.

  Could someone please clarify this me nicely?

  Best regards

  Hello

  If there is no DBCA running, stop it.

  OH, set to ASM_HOME.

  Create a listener and configure the network HOME of the ASM, using NETCA.

  Run localconfig from ASM_HOME.

  Run DBCA of ASM_HOME and create the ASM Instance.

  Just it.

• 10205 RDBMS House with 10204 CRS

  Hi friends,
  
  We have an obligation to upgrade the CRS and RDBMS and ASM House 10204 to 10205 on my server linux 3 knots. To this end, I'm not trying to upgrade existing homes 10204 directly. Instead, I am trying to install a new version of base:
  
  (1) install 10201 base for ASM and RDBMS House (on the same server where the 10204 crs asm RDBMS is there)
  (2) improve the base ASM 10201 and RDBMS to 10205 using the patches 8202632 group
  (3) upgrade of CRS later during the weekend.
  
  My reason for this in this way is that I can save time during the window of real failure by upgrading just of CRS at that time. But when I get to the point of application of the Group of hotfixes 10205, in the Verification of the prerequisites section useful, I am getting following error:
  
  Oracle Clusterware Version check
  The current version of oracleclusterware is not 10.2.0.5. Recommendation: you must upgrade all nodes to the Oracle Clusterware at 10205... You must pass all the nodes in the Oracle Clusterware at 10205 before proceeding with this installation.
  
  What I've done is I've checked the verified user and proceeded to the installation and the upgrade to 10205. So my question would be:
  Is what I done correct?
  It I just stopped installation and first run CRS updated and then do this upgrade?
  It will cause problems more later as ASM or RDBMS home runs later when the CRS is actually upgraded to 10205?
  
  I was checking this note "Oracle Clusterware - ASM - version of database compatibility (Doc ID 337737.1() .
  'and 'version Oracle Grid Infrastructure/Clusterware (CRS) should be the latest version down to the 4th digit combination at any time. This means that you first put Grid Infrastructure/Clusterware. »
  
  I agree with that, but I will not use the 10205 aSM and RDBMS homes until after the CRS improved 10205 weekend. This weekend all the houses will undergo 10205 only. Its only now the time to install it separately as I need to know if its ok to do it like that or if the problems in the future...
  
  
  Thanks in advance.

  Hello

  the installation program checks the CRS 10.2.0.5... This is for safety, not that you forget first put the clusterware and simply use a newer version.
  The installation of the software itself doesn't change - it will install exactly the same thing, any CRS version you use.
  So in your case, it should be absolutely okay (just make sure that you are not using anything out of the House, 10.2.0.5 before moving the clusterware;).

  However I'm not Oracle support, so if you want to be 100% sure that I suggest you open a SR.

  Sebastian

• After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for L775D.

  Original title: Graphics Adapter Gone.

  After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for my L775D. I have an AMD Radeon 6250 built in card and when you search AMD support site, it does not show my video card. I did a search automatically and empty came also.

  I also had a problem with a file. TVALZ_O Sys when I search because she is on board I came with 3 files which no I can do something with. The system will accept all available Windows updates and continues do not install 3 updates of security. This a Quad Core A6 Vision 1.4 GB processor any help would be greatly appreciated as I formatted and reinstalled until I'm blue in the face.

  Hello Stephen,

  The file that TVALZ_O seems to be linked to Toshiba ACPI and it seems THAT BIOS should be updated.

  Since you are facing many problems after the upgrade to Windows 7 Professional, it seems you may need to check the latest updates of the Toshiba BIOS.

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You have to get in contact with the support Toshiba BIOS update and to get help.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Silent installation of RDBMS HOUSE in RAC Server

  Version of grid Infrastructure: 11.2.0.3
  RDBMS version: 11.2.0.3
  Platform: Solaris 10
  
  Due to some technical problems, we install IM and RDBMS houses in silent mode (not through GUI).
  We have successfully installed of IM on both nodes. Now, we need to install a RDBMS software silently. We need to know what are the additional configurations that we have to run the RDBMS software with the cluster.
  
  From the bottom of post
  Hosting a 11.1 DB in a Cluster 11.2
  
  We met, we must do two things
  
  Step 1. Attach the RDBMS host 10.2 to the nodes in the cluster
  
  export ORACLE_HOME=/u01/oracle/10.2/db

  --from Node1
  /u01/oracle/10.2/db/oui/bin/attachHome.sh -silent -attachHome CLUSTER_NODES={sianhx134, sianhx135} LOCAL_NODE=sianhx134 -invPtrLoc /u01/oracle/10.2/db/oraInst.loc
   
  ---from Node2
  /u01/oracle/10.2/db/oui/bin/attachHome.sh -silent -attachHome CLUSTER_NODES={sianhx134, sianhx135} LOCAL_NODE=sianhx135 -invPtrLoc /u01/oracle/10.2/db/oraInst.loc

  Step 2. Relink the binary of RDBMS Oracle 10.2 to include the option of CARS.

  cd $ORACLE_HOME/rdbms/lib
  make -f ins_rdbms.mk rac_on ioracle

  Question1.
  What stage 1 (attachhome) exactly? This isn't "integrating" home RDBMS with the House of GI I can't IM home being specified in this step?
  
  
  Question2 . In metalink doc 1073926.1 , runInstaller script is used instead of the attachHome.sh script do the fixing. Here the ORACLE_HOME variable is passed into the command.
  
  -of Node1

  $ORACLE_HOME/oui/bin/runInstaller -silent -attachHome -local ORACLE_HOME="/opt/oracle/product/11.2.0/racdb" ORACLE_HOME_NAME="OraDb11g_home" "CLUSTER_NODES={racnode1,racnode2}" LOCAL_NODE='racnode1'

  -of node2

  $ORACLE_HOME/oui/bin/runInstaller -silent -attachHome -local ORACLE_HOME="/opt/oracle/product/11.2.0/racdb" ORACLE_HOME_NAME="OraDb11g_home" "CLUSTER_NODES={racnode1,racnode2}" LOCAL_NODE='racnode2'

  Which should I use (as mentioned in Metalink) attachHome.sh or runInstaller script?

  First, oracle hosting you are referencing is 10.2 not 11.2.

  second attachHome.sh uses runInstaller, then it sortof is not serious.

  This makes is to enter the OH specified in oraInventory. Pay attention as to what node you're on and which node you specify as "local".

  Don't know why you couldn't use the 'gui', you should study how to make X - ssh tunneling for X 11. works great if run you it correctly.

• I'm about to upgrade premium creative design cs4 for I mac 10.11.2. can I still use it? If it's not like I'm retired and I have only some minimum number of works during the year, I can upgrde at a regular bundel and to add a tax when I get to work, and/or

  I'm about to upgrade premium creative design cs4 for I mac 10.11.2. can I still use it? If it is not that I am retired and I have only some minimum number of works during the year, I can upgrde at a regular bundel and to add a tax when I get to work, and/or monthly pay depending on my work schedule?

  Move the discussion to the download, installation, commissioning.

  Please check the terms of System. Adobe Creative Suite 4, Point products. You can upgrade to the App only and add more applications each time as needed. Please check: pricing and membership creative cloud plans | Adobe Creative Cloud for more details on the plans and prices.

  I hope this helps.

• The upgrade of the House of fromXP to XP Pro

  I have XP home with Service Pack 3 installed. I would switch to XP Pro (mainly for the remote desktop connection). I also have a copy of XP Pro no service Pack installed.

  Is there a way to uninstall service packs make XP Home, then switch to XP Pro and add service packs- or is it useless?

  Will I need to re - install all my software, after installation 'clean '?

  Yes, you will be. Suggest that to create an installation CD integrated which includes SP3 where you have the need to repair XP.

  J W Stuart: http://www.pagestart.com

• Are displayed solutions / suggestions for action to fix a breakdown "upgrade library" for the mail after update El Capitan 10.11.2 accurate and useful?

  After five days of reading and discussion of the best way to go beyond the grip that appeared during the upgrade of El Capitan 10.10.1 to 10.10.2,"limited that I have no evidence that the steps provided and online by Apple engineers are the real solution.

  System and the details of the hardware:

  Start of OS: El Capitan 10.11.1

  Downloaded from Apple and installed update: El Capitan 10.11.2

  Computer: Power Book Pro, early 2011; 15-inch display

  Memory: 8 GB

  The window "Upgrade library" appeared immediately after the installation of the new operating system (. 2) and to try to use the Mail. The progress bar seems to stall and all messaging functions becomes unavailable. Precious data backed up 10 days before were not available on the computer. Apple consultants advised against the use of Time Machine to reinstall a backup Time Machine 10 - day old.

  Councillors, local and by phone from Apple support, recommended repeatedly running time-consuming terminal and orders of OS that would be to check and fix permissions.

  The activity of "Upgrade library" report Mail appeared repeatedly stalled as it was blocked from the outset.

  Finally, despite the appearance of an interim report to a standstill, I authorized the computer to continue working - even if the same apparent have absolutely no interim report - again - saw on the screen. I left the computer in precisely this configuration for five hours. The progress report on screen disappeared. I restarted the computer and Mail worked now, my data have been recovered.

  There is no evidence of this challenging experience that change the permissions of the home and the user had no impact. It is conceivable that had I was sick from the start, has allowed the computer to work (while the window of progress reported no progress) for five consecutive hours, the conversion of my mail e-mail data V 2 Mail V 3 (what was going on behind the scenes) could have taken place with zero assistance of a technician or the forums.

  Conclusion: I appreciate the hand holding, (perhaps useless) preparation of 'clean' permissions, expertise, training of experienced Apple staff who guided me through the steps of permissions, but there is no evidence of my experience that the stall, I knew was a permissions problem. It is quite possible, based on what I've seen, that just after leaving the computer running his own for five hours, or even overnight, perhaps gave the same result.

  Apple experts suggest that you reset the permissions. I suggest cancelling the computer for an evening, ensuring that energy preferences are set to allow the computer to work constantly without interruption, could give the same result. If the reset of the House / permissions for the user of the BONE and the Terminal are proven steps until the computer crunching to a conclusion, which is not obvious in my experience. It is possible from what I saw just the computer to perform its functions - despite the progress apparently stuck screen which does not indicate that progress - could be a simpler solution.

  If the Apple experts or users know better, is a necessary first step to reset the permissions, I'd be interested to know that.

  PS sorry my fault for typing in the opening graph: it should read 'when upgrading El Capitan 10.11.1 in 10.11.2' (No 10.10.1 to 10.10.2)

• How to upgrade to windows 7 64 bit, when I have Windows XP 32-bit by using the version "upgrade windows 7."

  I had been using windows XP 32 bit before decide me get windows 7. I have read around and thought you could buy the "version upgrade of windows 7" and go for 32-bit windows xp to windows 7 64 bit. Unfortunately, when I got home to do a clean installation of windows 7, I received an error message when I put in the 64-bit and says that the disc is not compatible with my current windows. I called Mircrosoft and they told me that with the version of windows upgrade 7 "" you can't go from 32 to 64-bit, that I would need to get the full version of this one for $200 here in the Canada. Unfortunately, at this time, I have the product installed and running. I'm a bit disappointed in this light my 6 GB of ram go lose and not to mention my $120 I spent. So I wanted to know are another that blow $200 for full windows 7 and lose my $120 on the updated version, is there another method to get the 64-bit? Because at this point, I am at a total loss.

  You can go from 32-bit XP to Windows 7 64 bit by doing a custom (clean) install with an upgrade version disk.  You don't need to buy a full version disc.  But you can't start from the upgrade disk.

  I don't know what you have installed now.  If XP is installed, turn on the computer, insert the DVD upgrade after start XP and follow the prompts.  This method might also work if 32-bit Windows 7 is installed.  If not, maybe to re - install XP to start the upgrade.

• iCloud won't let me upgrade to my new email address on my new iphone 6s, the sound by using an old email which is no longer active and won't let me delete or change.

  How can I change my email and id on icloud on my new iphone 6s

  Welcome dipete,

  Thanks for posting in the communities of Support from Apple. I see that you have changed the e-mail address on your Apple ID and your phone has the former account listed and does not let you change to the new. I know how it is important for the correct account on your phone. I'll be more than happy to help.

  Take a look at this article, I'll help you get the switch over.

  If iCloud asks you the password to your Apple ID - Apple Support previous

  Take care!

• Can I upgrade the graphics card on a Macbook Pro in 2011 to be able to use Adobe Creative cloud?

  I'm not a designer. I just want to use Indesign and photoshop for basic provisions / the strange brochure.

  I got an error message when I download Photoshop yesterday after that I subscribed to the cloud app all. Saying «PHOTOSHOP has IDENTIFIED a PROBLEM WITH THE DISPLAY DRIVER...» AND PROPOSES IMPROVEMENTS TEMPORARILY DISABLED USING THE GRAPHIC MATERIAL.

  I looked online and called the line of Adobe tips - United Kingdom: 0207 365 0735. A woman in Photoshop tech told me to uncheck 'Use the graphics processor' in preferences / performance saying I wouldn't have access to 3D in photoshop (not a problem).

  Drinking, that she didn't know if it would affect indesign or one of the other applications too? She also advised me to update my graphics card. But when I told him I didn't know if I COULD on an OLD Macbook Pro 2011 that she was unable to answer. Similarly when I contacted the chat for cancellations the woman there are no. ADVICE to OFFER. She did however try and sell me an extra free month IF I Cancel. Not very smart if it does not WORK

  God, I despair of the customer service.

  I have OSX 10.9.8, 4 MB of memory, graphics AMD Radeon HD 6750 M 1024 MB so this helps.

  Thanks in advance, Kay

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

• Upgrade to the APEX 3.2 in the tenth, what web server do I use?

  New user, so much to learn, starting with the silly stuff.
  
  I have a new installation of XE on Windows and was not on the bridge PL/SQL or Apache. I want to improve APEX and may as well stick with already, so I use...
  
  How do I know if I use the gateway PL/SQL or Apache? The installation guide for XE did not help, I guess that I do not use Apache as there is no configuration for her step in the installation.
  
  There the comparisons of the gateway PL/SQL and Apache showing the advantages and disadvantages that would let me make a wise choice?
  
  Are there only traps to the newly introduced appearance disconnection between the accounts of APEX and database?
  
  Thank you
  
  Ed
  
  Published by: user633260 on March 15, 2009 05:41
  
  Published by: user633260 on March 15, 2009 05:48

  Ed,

  If you have installed XE, you use the embedded PL/SQL gateway. On the advantages and disadvantages of the EPG vs Apache, our friend Tyler made some points here: Re: APEX3.2 with can emp runs do not on oracle database10g? .

  Are there only traps to the newly introduced appearance disconnection between the accounts of APEX and database?

  I think you may have misread something of what read you. There is no newly introduced change having to do with XE + Application Express (which has been there for years) or the report of the accounts of the user Application Express accounts database.

  Scott

• Something to watch out for when upgrading to JDK on OS?

  Running Oracle RDBMS 11.2.0.3 on RHEL6. The systemwide default JDK is currently the OpenJDK 1.6. I've been troubleshooting some problems with the jagent of GoldenGate upgrade that required me to use Oracle/Sun JDK 1.7. At this point, I wonder if there is a drawback to simply do the default Oracle/Sun JDK for the oracle OS user (who has the RDBMS and GoldenGate Software installed).

  I did have the pleasure of dealing in java database yet, but I understand that the RDBMS packaging its own JDK (in $ORACLE_HOME/jdk). However, I know that the GoldenGate process will use the external JDK.

  I was wondering if any of you out there did this and what I should look out for side effects.

  Thanks in advance!

  Hi Don,

  Oracle installation comes with its own jdk you mention and all the db utilities (netca etc.) are hard-coded to use the RDBMS House rather than a few os by default one.

  One within the database will be 1.6 in 11.2.0.3 I think (1.7 is available in only 12 c) - but is unaffacted by what you do outside - it is completely resident inside the DB - so classpath for example has no external connection paths - instead, he searches inside the db java objects.

  I'm sure you can do what you like with the jdk os and oracle does not care (even if JAVA_HOME is set to a new 1.7 on the operating system installation) - Although no doubt there's an exception somewhere...

  See you soon,.

  Rich

• Upgrade to 11g - DBUA cannot retrieve the version

  Hello
  
  I'm upgrading to 10.2.0.4 11.2.0.2 version and I have problem at the beginning.
  
  Immediately after the beginning of DBUA in the I get the error that the version of the database can ' be retrieved. Somewhere in the logs I found:
  
  connect / * as SYSDBA
  trigger the echo;
  @/ u01/app/oracle/OracleHomes/db11g/rdbms/admin/rdbmsup.sql.
  
  exactly at this moment I have understanding problem.
  
  It seems that the new software wants to connect to the instance and cannot. What should I do to enable him to do this? I started the new(11g) listener and it is possible to connect to the previous instance of 10 g, but the old instance runs in the old House. I can connect to it, but I have to use the tnsname 'emrep '. Without using the tnsname, it connects to the instance of idle.
  
  SQL > conn / as sysdba
  Connect to an instance is idle.
  SQL > conn sys@emrep as sysdba
  Enter the password:
  Connected.
  
  Without doubt, I made a mistake while configuring the listener, but I can't find any indication in this sense. In all the places where I'm looking, I see only: "create new listener using netca and add the database in the database for this listener Services tab using netmgr." In fact there is no need to do the last because tha database uses the default port 1521.
  If I do just that, the I get in $ORACLE_HOME/networt/admin folder listener.ora only with the following content:
  
  listener.ora # Network Configuration file: /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = mmredora.aegon - net)(PORT = 1521) .to)
  )
  
  ADR_BASE_LISTENER = / u01/app/oracle
  
  After that, I see the database that is registered with the listener:
  [oracle@mmredora-SID:emrep] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-AUG-2011 15:38:23
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = mmredora.aegon - net)(PORT=1521) .to))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date 27 - SEP - 2011 15:34:19
  Uptime 0 days 0 h 4 min 3 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/diag/tnslsnr/mmredora/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = mmredora.aegon - net)(PORT=1521) .to))
  Summary of services...
  Service 'emrep' has 1 instance (s).
  'Emrep' instance, State LOAN, has 1 operation for this service...
  The command completed successfully
  
  Can someone help me with this?

  Can you please review the MOS Doc below

  11 GR 2 DBUA stipulates 'the POC file does not have the version directive' (Doc ID 980693.1)

• Pavilion X 360 11-n012na: Clubhouse X 360 11 - n012na memory upgrade

  Is it possible to increase the ram from 4 to 8 GB?

  If possible the BIOS also does update?

  Hello

  Its Maintenece and Service of Guide:

  Customer accessible/upgradable memory module housing

  Support for DDR3L 1 333 MHz (downgrade DDR3L-1600-MHz to 1 333 MHz-DDR3L) - for use with Pentium processors

  Support for DDR3L-1066-MHz (downgrade DDR3L-1600-MHz at DDR3L-1066-MHz) - for use with Celeron processors

  Support 8192 MB RAM system in the following configurations:

  ● 8192 MB × 1

  ● 4096 MB × 1

  Source: http://support.hp.com/us-en/product/HP-Pavilion-11-x360-PC-series/6796818/model/7398935/manuals

  Kind regards.