Upgrade to the APEX 3.2 in the tenth, what web server do I use?

Similar Questions

• 4 Apex-Apex 3.2 on the same Oracle web server running

  Is it possible to run Apex 3.2 and 4 Apex on the same Oracle web server (apache)? We have two instances of different database with Apex 3.2 and 4 installed and configured oracle mod_plsql with web server.
  
  There are separate aliases defined in dads.conf as
  
  Alias is "/ opt/oracle/11 GR 2/apex/images / '-> apex 3.2
  Alias /i4/ "/ opt/oracle/11 GR 2/apex/images4 / «-> apex 4»»
  
  Apex 4 isn't picking up directory of images on the right, and it is not possible to log on to administer the apex workspace. Is it possible to set this up?
  
  Published by: user12099969 on June 28, 2010 05:43

  You have run the installation script with the appropriate letter for each alias directory instances?

  You have bounced the http?

  concerning

• HP Laserjet M606x: Disable the option 'Print' in the built-in Web server

  I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.

  The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.

  Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.

  To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.

• Finding information on the ink using the built-in Web server in Photosmarts

  SAP (built-in web server) is a useful tool which is used in many respects related to networking, it can provide information on Web Services and can also set Static IP and static DNS on the printer.

  But, if it is connected to the network via Ethernet or via a wireless connection with the Officejet, it is also a great way to check the ink levels and number of pages.

  To access EWS of the printer.  Take the IP address of the printer and type it in a browser on the computer. The IP address can be found under settings wireless to the printer on display or on the Network Configuration report that can be printed.

  Once we've hit this address in the browser, the integrated Web server opens to a screen that will show you some basic information on this page. It will be showing the ink levels estimated for the printer.

  For a more detailed look at the output of consumer and media of ink printers:

  1. once on the homepage of the Photosmart EWS, click the tab above titled "Tools".

  2. from there, looking at the left column on the new page that appears, click reports

  3. from here, click use report
  

   

  • We'll now be able to see how many cartridges have been replaced for each color in the printer.
  • Once can see the total number of pages for pages printed by the printer
  • This report will also give a break down on how many pages when printed on plain paper, photos and media size

  So, for those who are connected by Ethernet or wireless to the printer; Here's another option to find information about the ink levels.  These steps and information listed are general guidelines.

   

  I hope the community finds this is useful and informative.  Good impression!

• CF2016 - Alias/cf_scripts / scripts on the built-in Web server

  I am following the guide lockdown here:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/products/ColdFusion/PDFs/ColdFusion-2016-Lo ckdown - guide.pdf

  The guide proposes to move/cf_scripts/scripts directory, I did.

  The guide also offers using only the web server integrated access to the ColdFusion administrator, this is how I put it in place.

  The guide also indicates that you need to create an alias for the directory moved to the built-in web server.  See page 58 of the PDF.

  If you plan to use the built-in web server to access the ColdFusion administrator, you may need to create an alias for/cf_scripts/scripts if you have changed the default Script Src in ColdFusion administrator.

  To create a new Alias for/cf_scripts/scripts on the built-in web server

  If you plan to use the web server to access the ColdFusion administrator, then you must also add an alias by adding a tag context inside the tag of the located server.xml file host: /opt/cf11/cfusion/runtime/conf/server.xml

  < context path = ' / '.

  docBase = "/ opt/cf11/cfusion/wwwroot".

  Workie = "/ opt/cf11/fusion/runtime/cone/Catalina/localhost/tamp.

  alias = "/ coscripts = / opt/cf11/fusion/wwwroot/CFIDE/scripts" / >

  Restart ColdFusion, and then test by visiting /cfscripts/cfform.js on your server of builtin.

  There are a ton of typos in the present (Workie vs WorDir, vs conf cone, Pack vs coscripts vs cfscripts, tmp, etc..

  This also seems to be referencing the paths cf11 (CFIDE/scripts vs /cfscripts/cfform.js vs cf_scripts/scripts/cfform.js and cf_scripts/scripts).

  In addition, coldfusion - error.log notes the following:

  WARNING: A context path should be an empty string or start with a ' / ' and do not end with a ' / '. [The path [/] does not satisfy these criteria and has been replaced by]

  WARNING: [SetPropertiesRule] {Server/Service/engine/host/context} setting property 'alias' to ' / cf_scripts/scripts = / cf_scripts/test_scripts "did not find a corresponding property.

  The first line is not a problem, but the second line is.  alias is not a valid property of the context.

  The server.xml file is an example, and it is as follows:

  "< context path =" "docBase =" < cf_home > / wwwroot "WorkDir =" "< cf_home > / runtime/conf/Catalina/localhost/tmp" > "

  < resources >

  < base preResources = "docBase1" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath1" / > "

  < base preResources = "docBase2" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath2" / > "

  < / resource >

  < / context >

  It aligns with the Apache docs.

  I have CF installed on Windows, to F:\CF_2016\.  That's what I did to alias the directory of scripts (renamed to test_scripts for testing) for the built-in web server:

  < context path = "/" docBase = "F:/CF_2016/cfusion/wwwroot" WorkDir = "F:/CF_2016/cfusion/runtime/conf/Catalina/localhost/tmp" >

  < resources >

  < base preResources = className "F:/CF_2016/cfusion/wwwroot/cf_scripts/test_scripts" = "org.apache.catalina.webresources.DirResourceSet" webAppMount = "/ cf_scripts/scripts" / > "

  < / resource >

  < / context >

  It seems to work.  Is this correct? Wouldn't be an alias as \Scripts or /cfscripts instead of/cf_scripts/scripts?

  Why exactly should I alias this to the administrator?

  Thank you

  Hello

  I was in the same boat (we are defining a profile secure for testing) and I see no one answered you so I want to offer what we were doing.

  webAppMount = "/ {NEW_CFSCRIPTS_VIRTUAL_DIRTORYNAME" / >} "

  You see, I believe the problem you had previously was that the base should be the physical directory and the webAppMount should be the virtual directory.

  You were correct about the typos in the "official" document

  I don't know if it's important or not, but we have also created the directory "tmp" (quoted above) within the "{YOUR_DRIVE} :/. "{CFROOT} / cfusion/runtime/conf/Catalina/localhost / ' because it is not there by default.

  Kind regards
  David

• How not one disables the built-in web server?

  In my case Adobe technology enabled web server integrated for some sort of test and left, that it has.  I would like once more to turn it off to limit the attack surface that I see it's getting some visits by an internal network vulnerability scanner.

  Where is the configuration file and setting specific to only disable the built-in web server?

  Unwanted changes to the built-in web server is referenced in this article in the forum: http://forums.Adobe.com/message/4388179

  Add Miguel-F information, in case you use ColdFusion 9 then, adding only the code below, in the section above will be used.

  true

• Where to put XSD in the local (HTTP) Web server, so that they are visible?

  Currently I'm statically import my HDD XSD schema files into projects.
  
  However, I prefer to put these XSD files on the local (HTTP) Web server, so that I can return to their
  dynamically with a http://... address.
  
  How (where / which directory) what I have to put files to XSD schema on the Oracle Server local so that I can call them http://127.0.0.1/ resp. http://localhost/...
  
  Peter

  It is also common to the XSD files in $ORACLE_HOME/bpel/system/xmllib

  They are then available as http://HOST: PORT/orabpel/xmllib/XYZ.xsd.

  I recommend you do your own file in this directory. These are served by OC4J upward, not purely by Apache however.

• Photosmart 2575 AIO - need to reset the password for the built-in web server

  People,

  I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.

  Can you please help me reset it?

  Thanks in advance and Bravo!

  Cristian.

  csantiago78 wrote:

  I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.

  Can you please help me reset it?

  This thread gives to think that a full reset can be done by disconnecting the power to the Photosmart 2575, then plug the power while pressing the keys 'Cancel' and 'OK '.

• Publish the pix 501 Web server

  Remote office is connected to Headquarters via the site to site vpn. I have 1 static IP address (on the remote site) that I use for the site to site. I need to publish a web server at the remote site.

  My question is if I can use the same IP address for VPN and web server edition, I have a problem for the web server to publish

  See attachment

  Thanks for your time

  Hello

  Of course, you can use the same public IP address of your external interface for port forwarding, you just need to apply the acl to your external interface

  Add the line below to the config file. NT and try www

  Access-group interface incoming outside

  If no joy you can try to modify the acl to reflect outside keyword instead of the public IP address

  example:

  list of allowed inbound tcp access any interface outside eq www

  and delete the old (no list of access allowed tcp not incoming of any host 74.94.2yy.xxx eq www)

  Concerning

• What is the version of SQL Server Express embedded used?

  To the best of my knowledge, we are using vCenter Server 5.0 U1.

  Build number is 623373 in help | Everything.

  What is the version of the SQL Server Express included/embedded - 2008?

  How to know and check?

  I need to know specifically which version of SQL Server Express Management Studio install on our vCenter server so I can start to run maintenance such as backups that truncates logs, and also to allow for more storage Journal, we get the error 9002 with the journal storage.

  Thank you, Tom

  vCenter Server 5.0 uses Microsoft SQL Server 2008 R2 Express as the Group datasbase.

  See for example http://kb.vmware.com/kb/2003790

  André

• How to find the type of Web server is configured for use with ColdFusion

  Hello

  Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.

  Thank you!

  You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally

  Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server

  In fact, you can use this tool to add or remove web servers.

• Is upgrading to the El Capitan crash Server Apple Application?

  Only Mini server - crash Server Application after an upgrade to El Capitan, or it doesn't work until a patch is installed?

  My experience is that the upgrade using the App store of 10.10.5 for a running Server 5.0.15 smoothly by stopping the server, and then performing the upgrade. You must then open the.app and he made some kind of update and then starts with the previous services and settings as they were. At this point, that I reboot, no particular reason, it seems just too good to be true.

  C.

• After the upgrade of the oracle, what needs to be changed in the program

  Hello everyone.
  
  I want to upgrade the oracle 8i to 10g. I think I need to change somewhere in my program on SQL, PL/SQL and Pro * C, if I want the program can run without any problem.
  Can someone tell me where can I change my program.
  I want the list that needs to change SQL, PL/SQL and Pro * C.
  
  Thank you very much.

  A response has not been provided to you?

  I don't think that if you need to change anything but...

  the background is to be tested

• Upgrade to the latest version of Firefox. Cannot use my yahoo toolbar favorites. Can I go back to a previous version of Firefox?

  Favorite toolbar Yahoo do not work in the latest version of Firefox

  A new version of the Yahoo toolbar is released on 19 February.

  Download here: https://toolbar.yahoo.com/?.intl=us

  BTW, that extension should have been updated automatically, but some comments I saw yesterday, it seems that Yahoo has been / is having a problem with the server for updates to their end.

• How would I go about installing device driver USB mobile Apple who is missing after upgrading to the latest version of iTunes? I use Windows 10. Thank you.

  There are some days that I installed the latest version of iTunes. I've also updated my iPad 2 and iPhone 4 iOs 9.3 sec. Now I can not activate the iPad and iTunes on my PC does not show the iPad, or iPhone. I've gathered that the Apple mobile device driver is missing, but don't know how to install it. Any help?

  Maybe isn't a driver problem.

  Help here > How to restart the Service Apple Mobile Device (AMDS) on Windows