Upgrade to 11.2.0.4 with the physics of the standby database

Similar Questions

• Switching from primary to the standby database

  Hi all
  
  Please can you give me some advice/comments/documents to help understand the steps that should be applied to move from a primary database to a standby database.
  I'm using Oracle 11 g 2 with Dataguard.
  
  What are the steps that must be applied from the primary to the standby database.
  
  Kind regards

  Hello again;

  My paper is a physical standby database. I have NOT tested using a logical standby database.

  The steps documented to perform the failover of the database logical Standby is located in:

  Perform the failover in a Configuration of data hold without the [ID 232240.1] Data Guard Broker

  Look under the heading "the steps to perform the logical passage with the Standby databases:

  I hope this helps.

  There is additional information here:

  http://ayyudba.blogspot.com/2007/10/performing-switchover-in-Data-Guard.html

  Best regards

  mseberg

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• BAM works with the Oracle database only in the backend.

  Hi, I was wondering if Oracle Business Activity Monitor (BAM) implemented in ADF application works with the Oracle database as Oracle database is one of the databases very little supporting the database change Notification? Or can it be implemented using database of MySQL etc.
  
  Thank you!
  
  Published by: 996574 on June 3, 2013 14:06

  As far as I KNOW only Oracle db supports the database change Notification.

  Timo

• How many still for my application to interact with the Timesten database?

  Hi all, still how much for my application to interact with the Timesten database?
  As far as I know, we can connect directly to the database without network load that improves performance, should my application only to specify the DSN name under the name of DSN Manager data? There is no document to clarify that clearly.
  The other approach is c/s connection and there are 3 commucation protocols, such as plain TCP/IP, sockets, UNIX domain and the CPI, right?

  Yes, that's correct. (Preferably) direct mode when the application and TimesTen are on the same machine. UNIX domain socket and shared memory IPC server local (only for cases of special purpose given that the direct mode is faster and more) and normal TCP/IP client/server (local or remote).

  The specific details on how the application connects depends on which API that it uses (ODBC, OCI, Pro * C, JDBC, ODP .NET). For ODBC and JDBC, you must specify a data source name and use the driver corresponding (direct-mode driver or client driver). For the OIC that is configured through SQL * Net and TNSNAMES. ORA and for ODP .NET, I don't remember without it looking up. Please see the TimesTen for relevant API documentation for full details.

  Chris

• The Oracle HTTP Server come FREE with the Oracle database

  Hello
  
  Please let me know if Oracle HTTP Server are FREE with the Oracle database.
  
  Also any idea how much it would cost roughly to buy independent?
  
  Thank you

  Please let me know if Oracle HTTP Server are FREE with the Oracle database.

  If this is a related issue of license then better check with the sales representative in your area. Oracle sales team can only confirm the details.

  As far as I know if a product is delivered in another product then product main price includes the price of the licenses for all.

  Example: OEM license purchase, will include the license for Weblogic.

• Effects of the opening of a primary database in resetlogs on the standby database

  Hi all

  Operating system: Solaris

  DB: 11 gR 2

  Can anyone throw some light below the explanation is given in case of recovery through the OPEN RESETLOGS Statement oracle documentation

  If the database pending...	Then...	Perform these steps...
  Not asked to redo data beyond the new resetlogs SCN (after the start of the new branch of data recovery)	Redo apply automatically takes the new branch of the roll forward.	No manual intervention is required. The MRP automatically resynchronizes the database pending with the new branch of data recovery.

  Here is the link of the source:

  Manage a database of physical standby

  Kind regards

  Just to give a concrete example, I did a test on one of my VM boxes. The database currently shows:

  SQL > select sequence #, the journal of v status $;

  SEQUENCE # STATUS

  ---------- ----------------

  34 ACTIVE

  CURRENT 35

  ACTIVE 33

  While on the eve, I stopped the redo apply so the standby status is:

  SQL > select sequence #, used from v$ archived_log;

  SEQUENCE # APPLIED

  ---------- ---------

  YES 30

  31 YES

  32 YES

  33 NO.

  34 NO.

  The database ensures in a few newspapers behind the primary.

  On the primary, I moved the journal a few sequences, close, the bootable media and restored and recovered 37 sequence:

  RMAN > run

  2 > {}

  3 > restore database;

  4 > up 37 sequence;

  5 > restore database;

  6 > alter database open resetlogs;

  {7 >}

  During the open resetlogs operation, I have to tail the log of alerts on the standby database and the following output shown:

  RFS [11]: identified the type of database such as 'physical' standby: customer is ARCH pid 17192

  RFS [11]: new branch archives REDO: 844006029 current: 843649185

  RFS [11]: Journal selected 102 for thread 1 1 dbid-204899919 branch of the 844006029 sequence

  RFS [11]: new Branch (resetlogs_id) of archive REDO: before 844006029: 843649185

  RFS [11]: ID of Activation of archives: current 0xf3d44942: 0xf3cf5ac3

  RFS [11]: effect of primary database OPEN RESETLOGS

  RFS [11]: entry of Incarnation added to Branch (resetlogs_id): 844006029 (ORCL11PS)

  Fri Apr 04 14:07:39 2014

  Definition of embodiment of recovery target 2

  Fri Apr 04 14:07:39 2014

  Archived journal 21 additional for each sequence 1 1 0xf3d44942 dest ID thread entry 1:

  So as you can see, the log shows the standby detects the resetlogs on the primary operation and the new branch of the roll forward and received the next archivelog with sequence 1.

  Audit on the eve, it shows the status following the archivelogs:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  32 YES

  33 NO.

  34 NO.

  35 NO.

  36 NO.

  37 NO.

  38 NO.

  1 NO.

  2 NO.

  And after restart the managed recovery process, it now shows:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  YES 30

  YES 19

  YES 33

  34 YES

  35 YES

  YES 36

  37 NO.

  38 NO.

  1 YES

  2 YES

  Archivelogs with sequence 37 and 38 were not implemented because of the CAMILLE on the main sequence until (but not including!) 37 and then properly applied the next archivelogs of the new branch of the roll forward, with sequence 1 and 2.

• Backups on the physics of the standby database?

  I use dataguard and standby a physical database. How to assign backups on the physics of the standby database to reduce the load on the primary database.
  
  environment: windows
  
  Database version: 11.2.0.1.0
  
  
  What are the pro and cons on the allocation of jobs of RMAN backups for the physics of the standby database?

  Hello;

  The backup database is an identical copy of the primary database block.

  Therefore, you just save one of the two (you can choose to only save the day before, however, if you want to remove the load on the primary). But if you are uncomfortable with the primary backup, it is not necessary for the safeguarding of the day before. (Since you can recreate the primary backup before).

  The only important part, is that you use the RMAN catalog. Then only known RMAN, the two are identical and can use the same backup.

  Best regards

  mseberg

• The physics of the standby database Y2K problem

  Hi all
  
  I am the passage of primary school to the physics of the standby database. Physical standby is in "recovery management" mode using real-time applies and is in editing mode. I've run alter database commit to switch to sleep mode physical with the logoff command. Now I'm waiting for standby mrp leave after treated RAH recording, but it seems mrp was hanged.
  
  Here is the content of the database pending:
  
  Online Redo Log recovery: thread 1 mem Group 5 Seq 620 reading 0
  Mem # 0: /oracle/app/oracle/dbrac/th1-redo5a.log
  Activation reset sleep ID 749049115 (0x2ca5951b)
  Met Media Recovery end Redo indicator
  Media recovery continues
  Media, recovery waiting for thread 1 sequence 621
  Journal archived 14 extra for each thread 1 620 0x2ca5951b dest ID sequence entry 1:
  
  
  Need help to solve.
  
  Thank you
  Sandy.

  Hello;

  After after deliver you (successfully) a:

  alter database commit to switchover to physical standby with session shutdown
  

  You must:

  Shutdown the former primary and mount as a standby database
  

  Check out my step by step:

  http://www.Visi.com/~mseberg/data_guard/Data_Guard_switchover.html

  Read everything (all steps) before continuing.

  Best regards

  mseberg

• failover and failback on the physics of the standby database.

  Hi all
  
  I use the EE 10.2.0.4.I oracle version have a configuration database and named prim and Everelief. I tried the method of failover. I liquidated low primary eve and convert to the new primary database.
  
  
  •Arretez repeat applies.
  Run the following SQL statement on the database waiting for target:
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  Standing by applying all the data received to redo.
  In this we give indication to the standby database primary database is no more.
  
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
  Once the order of FINISH is completed, the mode of protection of the primary database is lowered to optimum performance, regardless of its original protection mode. This is done because the new primary can be activated with on a standby
  SQL > select protection_mode, protection_level from database v$
  Level of Protection for the protection Mode
  ——————– ——————–
  PERFORMANCE WITHOUT PROTECTION
  
  •Check that the standby database target is ready to become a primary database.
  
  Query column SWITCHOVER_STATUS of the view V$ DATABASE on the database waiting for target.
  •If the physical database ensures the main role.
  SQL > ALTER DATABASE COMMIT to THE MOVE to THE PRIMARY WITH the STOP of the SESSION;
  •Open the new primary database
  SQL > ALTER DATABASE OPEN;
  •At this point the level of protection is passed to Max Performance "Unprotected".
  Circuits the new primary database.
  
  
  
  How can I see this previous situation?

  Hello;

  I can share my test notes (Oracle 11) should work even in 10:

  http://www.Visi.com/~mseberg/Data_Guard_Failover_Test_using_SQL.PDF

  Best regards

  mseberg

• Destination different archivelog on the physics of the standby database

  Hello

  Can I set different archivelog destination for the physics of dual standby database? (Because of space issues) How can I do?

  For example, on the site main archivelogs reside in/u01/ORCL/archivelog and I want on phy. side Eve archive dest. under/u08/ORCL/archivelog.

  You can also give LOG_ARCHIVE_DEST_1 in file init Eve, so whenever you start sleep/auxiliary instance automatically done dest_1 refers to/u08/orcl (whereever you want).  So you can have destination archive anywhere but must have the appropriate permissions and location should be available.

  If you want to set a destination, then again you can use the "ALTERNATE" sort clause only when the primary location unavailable or unable to archive, and then, of course, he wrote in the other location you have specified a pfile.

  You can check this

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/log_arch_dest_param.htm#i91817

• Archived not getting applied to the standby database.

  Hello
  
  I turned the parameter standby_file_management to manual and since I created 3 primary data file, but they are not applied to the standby database.
  I turned on the Auto setting and started the MRP process but still not able to apply archive.
  Version Oracle 10.2.0.5
  
  
  Please suggest,
  Amit Sharma

  Hello

  Your problem is that the MRP standby automatically when a data file is added on the primary database. The reason would be that the parameter STANDBY_FILE_MANAGEMENT is set to MANUAL on the standby database.

  Please refer to this http://shivanandarao-oracle.com/2012/04/02/managed-recovery-process-mrp-terminates-on-standby-database-upon-adding-datafile-on-the-primary-database/

  It will be useful.

  Kind regards
  Shivananda

• Data file not shipped from the primary database to the standby database

  Hello
  
  (1) create a new user
  (2) created a new table space and add datafile on the primary database
  (3) the value tablespace default user
  
  But so far, this new data file is not delivered on the standby database.
  
  Version of database - 10.2.0.3
  OS - Windows
  
  Setting of primary and Standby: -.
  
  SQL > show parameter standby_file_management;
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  standby_file_management string AUTO
  
  Both have the same file system, but the difference is case sensitive.
  
  Primary data file location - D:\testdata
  
  Location of file data at rest - D:\TESTDATA
  
  Help, please.

  MRP process is running on the standby database?

  If it is then try to pass, log on the primary database and share your result.

• Script of free space for the physics of the standby database

  I need to determine how much free space I have in my physical storage spaces of the standby database. Is there a query for this? Remember that dba_ views are not available in a mounted single standby database so I'm pretty well limited to using the views v$. Thank you

  Why do you think you have to check the free space into a storage ensures physical ?
  You cannot create all segments anyway.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Upgrade a new empty hard drive with the old product key Windows OS Windows Y Ultimate 32 bit is possible, if so how?

  I have a laptop with an earlier version of Windows OS on it and I have the product key for this (it's the Microsoft label on the bottom of the laptop), the hard drive failed and I can't access the data on the disk, including the recovery partition, which I had not done a cope of , and I want to kow if I buy version upgrade of Windows 7 Ultimate 32 - bit you and install it on a blank hard drive recently replaced, also does with the media?

  In order to qualify and install a version upgrade of Windows 7 on a blank hard drive, you must have a qualification already installed Windows XP or Vista operating system.  Otherwise, you can buy an edition of Windows 7 "full version".

• Upgrade Vista Basic Vista Home Premium with the old product key.

  When I bought my laptop, it came with Vista Home Premium installed. I had to wipe my HD and reinstalled Vista using the diskette provided me by Dell, but the version they gave me was Vista Home Basic. Is there a way to upgrade to Home Premium with pay them for it because I bought the license when I first bought my computer?

  Contact Dell on them giving you the wrong recovery disk...

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation

  See you soon.

  Mick Murphy - Microsoft partner