Backups on the physics of the standby database?

Similar Questions

• Destination different archivelog on the physics of the standby database

  Hello

  Can I set different archivelog destination for the physics of dual standby database? (Because of space issues) How can I do?

  For example, on the site main archivelogs reside in/u01/ORCL/archivelog and I want on phy. side Eve archive dest. under/u08/ORCL/archivelog.

  You can also give LOG_ARCHIVE_DEST_1 in file init Eve, so whenever you start sleep/auxiliary instance automatically done dest_1 refers to/u08/orcl (whereever you want).  So you can have destination archive anywhere but must have the appropriate permissions and location should be available.

  If you want to set a destination, then again you can use the "ALTERNATE" sort clause only when the primary location unavailable or unable to archive, and then, of course, he wrote in the other location you have specified a pfile.

  You can check this

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/log_arch_dest_param.htm#i91817

• The physics of the standby database Y2K problem

  Hi all
  
  I am the passage of primary school to the physics of the standby database. Physical standby is in "recovery management" mode using real-time applies and is in editing mode. I've run alter database commit to switch to sleep mode physical with the logoff command. Now I'm waiting for standby mrp leave after treated RAH recording, but it seems mrp was hanged.
  
  Here is the content of the database pending:
  
  Online Redo Log recovery: thread 1 mem Group 5 Seq 620 reading 0
  Mem # 0: /oracle/app/oracle/dbrac/th1-redo5a.log
  Activation reset sleep ID 749049115 (0x2ca5951b)
  Met Media Recovery end Redo indicator
  Media recovery continues
  Media, recovery waiting for thread 1 sequence 621
  Journal archived 14 extra for each thread 1 620 0x2ca5951b dest ID sequence entry 1:
  
  
  Need help to solve.
  
  Thank you
  Sandy.

  Hello;

  After after deliver you (successfully) a:

  alter database commit to switchover to physical standby with session shutdown
  

  You must:

  Shutdown the former primary and mount as a standby database
  

  Check out my step by step:

  http://www.Visi.com/~mseberg/data_guard/Data_Guard_switchover.html

  Read everything (all steps) before continuing.

  Best regards

  mseberg

• failover and failback on the physics of the standby database.

  Hi all
  
  I use the EE 10.2.0.4.I oracle version have a configuration database and named prim and Everelief. I tried the method of failover. I liquidated low primary eve and convert to the new primary database.
  
  
  •Arretez repeat applies.
  Run the following SQL statement on the database waiting for target:
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  Standing by applying all the data received to redo.
  In this we give indication to the standby database primary database is no more.
  
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
  Once the order of FINISH is completed, the mode of protection of the primary database is lowered to optimum performance, regardless of its original protection mode. This is done because the new primary can be activated with on a standby
  SQL > select protection_mode, protection_level from database v$
  Level of Protection for the protection Mode
  ——————– ——————–
  PERFORMANCE WITHOUT PROTECTION
  
  •Check that the standby database target is ready to become a primary database.
  
  Query column SWITCHOVER_STATUS of the view V$ DATABASE on the database waiting for target.
  •If the physical database ensures the main role.
  SQL > ALTER DATABASE COMMIT to THE MOVE to THE PRIMARY WITH the STOP of the SESSION;
  •Open the new primary database
  SQL > ALTER DATABASE OPEN;
  •At this point the level of protection is passed to Max Performance "Unprotected".
  Circuits the new primary database.
  
  
  
  How can I see this previous situation?

  Hello;

  I can share my test notes (Oracle 11) should work even in 10:

  http://www.Visi.com/~mseberg/Data_Guard_Failover_Test_using_SQL.PDF

  Best regards

  mseberg

• Script of free space for the physics of the standby database

  I need to determine how much free space I have in my physical storage spaces of the standby database. Is there a query for this? Remember that dba_ views are not available in a mounted single standby database so I'm pretty well limited to using the views v$. Thank you

  Why do you think you have to check the free space into a storage ensures physical ?
  You cannot create all segments anyway.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Effects of the opening of a primary database in resetlogs on the standby database

  Hi all

  Operating system: Solaris

  DB: 11 gR 2

  Can anyone throw some light below the explanation is given in case of recovery through the OPEN RESETLOGS Statement oracle documentation

  If the database pending...	Then...	Perform these steps...
  Not asked to redo data beyond the new resetlogs SCN (after the start of the new branch of data recovery)	Redo apply automatically takes the new branch of the roll forward.	No manual intervention is required. The MRP automatically resynchronizes the database pending with the new branch of data recovery.

  Here is the link of the source:

  Manage a database of physical standby

  Kind regards

  Just to give a concrete example, I did a test on one of my VM boxes. The database currently shows:

  SQL > select sequence #, the journal of v status $;

  SEQUENCE # STATUS

  ---------- ----------------

  34 ACTIVE

  CURRENT 35

  ACTIVE 33

  While on the eve, I stopped the redo apply so the standby status is:

  SQL > select sequence #, used from v$ archived_log;

  SEQUENCE # APPLIED

  ---------- ---------

  YES 30

  31 YES

  32 YES

  33 NO.

  34 NO.

  The database ensures in a few newspapers behind the primary.

  On the primary, I moved the journal a few sequences, close, the bootable media and restored and recovered 37 sequence:

  RMAN > run

  2 > {}

  3 > restore database;

  4 > up 37 sequence;

  5 > restore database;

  6 > alter database open resetlogs;

  {7 >}

  During the open resetlogs operation, I have to tail the log of alerts on the standby database and the following output shown:

  RFS [11]: identified the type of database such as 'physical' standby: customer is ARCH pid 17192

  RFS [11]: new branch archives REDO: 844006029 current: 843649185

  RFS [11]: Journal selected 102 for thread 1 1 dbid-204899919 branch of the 844006029 sequence

  RFS [11]: new Branch (resetlogs_id) of archive REDO: before 844006029: 843649185

  RFS [11]: ID of Activation of archives: current 0xf3d44942: 0xf3cf5ac3

  RFS [11]: effect of primary database OPEN RESETLOGS

  RFS [11]: entry of Incarnation added to Branch (resetlogs_id): 844006029 (ORCL11PS)

  Fri Apr 04 14:07:39 2014

  Definition of embodiment of recovery target 2

  Fri Apr 04 14:07:39 2014

  Archived journal 21 additional for each sequence 1 1 0xf3d44942 dest ID thread entry 1:

  So as you can see, the log shows the standby detects the resetlogs on the primary operation and the new branch of the roll forward and received the next archivelog with sequence 1.

  Audit on the eve, it shows the status following the archivelogs:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  32 YES

  33 NO.

  34 NO.

  35 NO.

  36 NO.

  37 NO.

  38 NO.

  1 NO.

  2 NO.

  And after restart the managed recovery process, it now shows:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  YES 30

  YES 19

  YES 33

  34 YES

  35 YES

  YES 36

  37 NO.

  38 NO.

  1 YES

  2 YES

  Archivelogs with sequence 37 and 38 were not implemented because of the CAMILLE on the main sequence until (but not including!) 37 and then properly applied the next archivelogs of the new branch of the roll forward, with sequence 1 and 2.

• Switching from primary to the standby database

  Hi all
  
  Please can you give me some advice/comments/documents to help understand the steps that should be applied to move from a primary database to a standby database.
  I'm using Oracle 11 g 2 with Dataguard.
  
  What are the steps that must be applied from the primary to the standby database.
  
  Kind regards

  Hello again;

  My paper is a physical standby database. I have NOT tested using a logical standby database.

  The steps documented to perform the failover of the database logical Standby is located in:

  Perform the failover in a Configuration of data hold without the [ID 232240.1] Data Guard Broker

  Look under the heading "the steps to perform the logical passage with the Standby databases:

  I hope this helps.

  There is additional information here:

  http://ayyudba.blogspot.com/2007/10/performing-switchover-in-Data-Guard.html

  Best regards

  mseberg

• Archived not getting applied to the standby database.

  Hello
  
  I turned the parameter standby_file_management to manual and since I created 3 primary data file, but they are not applied to the standby database.
  I turned on the Auto setting and started the MRP process but still not able to apply archive.
  Version Oracle 10.2.0.5
  
  
  Please suggest,
  Amit Sharma

  Hello

  Your problem is that the MRP standby automatically when a data file is added on the primary database. The reason would be that the parameter STANDBY_FILE_MANAGEMENT is set to MANUAL on the standby database.

  Please refer to this http://shivanandarao-oracle.com/2012/04/02/managed-recovery-process-mrp-terminates-on-standby-database-upon-adding-datafile-on-the-primary-database/

  It will be useful.

  Kind regards
  Shivananda

• Data file not shipped from the primary database to the standby database

  Hello
  
  (1) create a new user
  (2) created a new table space and add datafile on the primary database
  (3) the value tablespace default user
  
  But so far, this new data file is not delivered on the standby database.
  
  Version of database - 10.2.0.3
  OS - Windows
  
  Setting of primary and Standby: -.
  
  SQL > show parameter standby_file_management;
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  standby_file_management string AUTO
  
  Both have the same file system, but the difference is case sensitive.
  
  Primary data file location - D:\testdata
  
  Location of file data at rest - D:\TESTDATA
  
  Help, please.

  MRP process is running on the standby database?

  If it is then try to pass, log on the primary database and share your result.

• Upgrade to 11.2.0.4 with the physics of the standby database

  Dear gurus,

  
  We have the obligation to upgrade databases 11.2.0.1 existing 11.2.0.4 and 11.2.0.2 to 11.2.0.4 running on AIX boxes. We have physical databases of Eve configured for these databases of different version.

  During the preparation of the documentation for upgrade, we observed that FORCE_LOGGING is disabled for the production databases and observed, there are objects along 350 + with journaling = No. and logging = NULL and patterns are SYS, SYSMAN, APEX_030200, OLAPSYS, XDB, SYSTEM, OIMDBUSER, MDSYS, EXFSYS, WMSYS, ORDDATA, PERFSTAT.

  My query:

  I can still proceed with the upgrade still under the document indicated for "upgrading a database with a physical Standby database in place" without you connect the data dictionary objects will be not be updated pending database.

  Can you please let me know your suggestions on this please?

  Kind regards

  Kumar

  Hello;

  Quote:

  "Keep the database in LOGGING mode FORCE as long as the backup database is necessary."

  Of

  Oracle® DataGuard of Concepts and Administration 11 g Release 2 (11.2) E10700-02

  I think I FORCE turn on CONNECTING to the primary database and rebuild the eve before doing the upgrade.

  Best regards

  mseberg

• create the standby database using backup to restore

  Hello

  I'm creating a database ensuring 11g using a manual process of restoring a backup, but nothing helped. I can restore same failed backup.

  Here are the steps that I followed (courtesy of ORACLE-BASE) BASE-ORACLE Data Guard physical standby Setup in Oracle Database 11 g Release 2 -

  I'm confused about these steps:

  Copy the files from the primary to the standby server.

  Copy Standby controlfile to all locations. 
  $ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl 
  $ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
  

  My question is, for the 2nd copy, I have to stop the primary db? given that control01.ctl is updated all the time?

  Then I have not used the previous day ctl (db11g_stbg.ctl) and copy it into /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?

  Your help is very appreciated.

  Check "ORCL" your backup files will be present in this place.

• GoldenGate to replicate physical of the standby database

  Friends,

  I don't have an answer instead of data guard

  Could we use oracle Portal gold to replicate a physical custody ensures data in a new logical basis?

  Or we need to replicate keeps the primary database data in a new logical basis?

  Thank you

  newdba

  Use the extract parameter TRANLOGOPTIONS with the ARCHIVEDLOGONLY option. This

  force option extracts for ALO mode against a primary or logical standby

  database, as determined by the PRIMARY or STANDBY LOGIC value in the db_role

  column in the view v$ database. The default is to read newspapers online.

  TRANLOGOPTIONS with ARCHIVEDLOGONLY is not necessary if you use the ALO mode against a

  standby database physical, as determined by the PHYSICAL INTELLIGENCE value to the

  db_role column of v database $. Extract works automatically in ALO mode if it

  detects that the database is a physical standby.

• Script to remove applied connects on the physics of the standby database

  Hello
  
  Our prod DB is configured with Dataguard physical standby Database (10.2.0.4) on Linux.
  
  I'm trying to write a script to delete the archives that are applied on a standby database to DR (standby server).
  
  Any help will be appreciated.
  
  Kind regards
  Viswa08

  viswa08 wrote:
  Hi pavan,.

  I received the script of OTN itself below is the script and I can't understand how the sequence is deleted.

  ******************************************************************************************
  ###################
  #! / usr/bin/ksh

  script = ' basename $0'.

  SID = RW2P
  dir = / u04/oracle / $sid/arch

  Prof = $HOME /'echo ${sid} | AWK ' {print tolower($0)} ".profile
  tmpf=$home/.$script.tmp

  LogCount = 100

  function GetAppliedLogfileSequenceNumber
  {
  sqlplus-s/nolog $tmpf
  Connect / as sysdba
  Go head
  set pages 0
  Select max(sequence#) from v$ archived_log in case of application = 'YES ';
  output
  EXPRESSIONS OF FOLKLORE
  return
  }

  If [f $prof]
  then
  . $prof
  on the other
  print ' $script: $prof no such file or directory ".
  Output 1
  FI
  If [d $dir]

  If there is the $dir

  then
  CD $dir

  change directory to $dir

  GetAppliedLogfileSequenceNumber

  call the GetAppliedLogfileSequenceNumber function

  So [s $tmpf]

  If there is no sequence max

  then
  Count ='cat $tmpf | AWK '{print $1} ' | SED 1 d; »

  Set as maxsequence

  If [${#count} - No 0]

  If the counter is not zero

  then
  Let count = $count - $logcount

  Assign County County-100 the script does not remove the last 100 archivelogs applied.

  If ((County<=>

  If count is less than or equal to zero

  then
  print ' $script: journal count is set to zero (or not) no or newspapers to remove.
  Exit 0
  FI
  on the other
  Exit 0
  FI
  on the other
  print ' $script: no archive or newspapers to remove.
  Exit 0
  FI
  While [http:// f ${sid} _arch_1_$ {number} .arc]

  If $ORACLE_SID_arch_1_count.arc is

  do
  RM-f ${sid} _arch_1_$ {number} .arc

  delete

  RCODE = $?

  RCODE is assigned as the return code of the rm command.

  If ((rcode! = 0))

  If the return code is success

  then
  Print "$script: can't delete: ${sid} _arch_1_$ {number} .arc.
  Output 1
  on the other
  Let count = $count - 1

  reduce the number of 1

  FI
  fact
  RM-f $tmpf

  delete the temporary file.

  on the other
  print ' $script: $dir no such file or directory ".
  Output 1
  FI
  Exit 0

  Hope will help you.

  Kind regards.

• Need help on Physics of the standby database

  Currently, our physical database ensures runs in manual mode and newspapers is applied by me manually within 2 days.
  
  And also when I add a data file in the primary database, I have to manually add the file again to sleep.
  
  This process becomes too painful, that now I want to automate this process,
  
  Now my question is
  To automate this process, I need to bounce back to the database?
  I want to have the gap of 2 days for check log to apply the process? How should I do this.
  
  And all the settings I need to change.
  
  Please advice...
  
  Oracle 9.2.0.7 verison
  Solaris 10 operating system

  ORA_DBA2 wrote: for the automatic management of the files that I need to enable these settings,

  For example

  standby_archive_dest = ' / disk1/oracle/oradata/payroll/standby.
  db_file_name_convert = ('/ disk1/oracle/oradata/pay /',)
  ’

  db_file_name_convert and redo_file_name_convert are parameters used for databases of relief when waiting for redo log files and data files are in different places of the primary database. If you do a conversion of the locations. If they are the same as the primary, then you don't need the parameters. What do you need to make sure of, is that you have standby_file_management = 'auto', while created for primary data files are also created for sleep.

• Switch on the physics of the standby database

  Hello
  
  I'm the primary database "DPRB" on the ip address of the server 10.0.0.7.
  and database ensures "DBST" Physics on the ip address of 10.0.0.8 Server
  
  I can spend the roles of database with integrated OEM Data Guard Broker.
  
  At some methods including ip automatic change of database pending after switch? cuase users didn't change tsnnames of files?
  
  Can I use LDAP internet directory or 2 network interfaces on private and public servers, but is located in oracle, another solution? simple like DataGuard broker

  Follow this metalink note:

  Step by step guide how to configure and test the failover of Client for the transition to the Dataguard and failover.
  DOC - ID: 740029.1

  Werner