Upgrade to 4.1 failing - not enough scratch space?

Similar Questions

• Upgrade to 10.5 fails - not enough disk space in common Partition - db_hist using more space

  Hi all

  Tried upgrading our 9.0 (2) UCCX SU1 HA deployment 10.5 (1) last night and it failed with the following message.

  There is not enough disk space in the common partition to perform the upgrade. Please use the platform command line Interface or the tracking tool in time real (RTMT) of free space on the common partition.

  RTMT reported common disk space used as 94%. RTMT using we put the LogPartitionHighWaterMarkExceeded at 55% and waited for the disk space free. No luck.

  A bit more investigation and it turns out there is a database called db_hist_dbs in the common partition which is 33 GB in size. This is the command and returned the output that we used to find this point.

  See the common diskusage

  8.0 K/common/Ministry of health

  33G/common/var-uccx/CBD/db_hist_dbs

  1.6 G/common/var-uccx/CBD/temp_uccx_dbs

  201M/common/var-uccx/CBD/uccx_er_dbs

  1.6 G/common/var-uccx/CBD/uccx_ersb_dbs

  37G/common/var-uccx/dbc

  37G/common/var-uccx

  /Common/ontape_backup.gz 16 M

  8.0 K/common/cancel_upgrade

  Using this command - show uccx dbserver disc - we can see that the db_hist database file is actually 80% free! Output of the command here-

  SNO. TOTAL SIZE (MB) OF NAME OF DATABASE SIZE (MB) USED THE FREE SIZE (MB) TO ONE HUNDRED FREE

  ---- ------------------ --------------- -------------- -------------- ------------

  4 db_hist 34508,6 6836.9 27671,7 80%

  Anyone have any ideas on how to reduce the file size of the database in question? Is it still possible? Or what are our options to work around this problem and perform the upgrade.

  Thanks in advance

  Jeff

  You run in this bug: CSCul18667

  Symptom:
  Log purge CUIC is not clean file JMX. Upgrade may fail for lack of space.
  "show status" command s show that logging consumes 99% of space

  Workaround solution:
  Can remove by going to RTMT-> central tracking log & -> remote browse-> nodes-> 'specific node'-> UCCX-> Cisco Unified Intelligence Center Servicability Service-> jmx-> select all-> Delete

• When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

  no installed: 246 encoder

  When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

  Hello

  ·         The question is limited only with Real Player?

  Method 1:

  You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  See also:

  http://www.Microsoft.com/download/en/details.aspx?ID=507

  Method 3:

  If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

  How to change or Remove a program in Windows XP

• "Backup failed. Not enough storage space.

  Original title: image

  W7 32-bit HP. Use the image via Control Panel with success for a long time. However, this morning received the message "backup failed. Not enough storage space. Have you checked and at least ten times more space on the destination like this drive would be necessary for the entire image.  The only change I've made since the last successful backup is to install an SSD on my computer as the main C drive.

  Thanks, but none of it has hit the problem!

  I now it worked. For the benefit of any person who has the problem, Image requires that there is enough space on the * source * system partition of the drive for the shadow file (when get "space insufficient" messages everyone (including me) assumes respect to the * destination drive!)  (Not so).

  This seems to happen to a lot of people who are for the first time in an SSD. Because I had previously shrunk the partition on my drive C primary, preparatory to mounting small SSD (112 GB), the system partition was too small for shadow of the image file.

  Under W7 disk management even if the main partition on the C drive could be reduced to create a space unallocated, the space could not be assigned to the system partition as requiring a contiguous space.

  So I used (free for home) Easus Disk Manager to create space * before * the partition main c and then expanded the system inside partition, making this system partition that is large enough. Everything worked well then!

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Not enough free space on the drive to intall Brother MFL - Pro Suite

  My PC is running Windows XP Home Edition Version 2002, Service Pack 3 and I had my Brother MFC-9440CN multifunction printer for about 2 or 3 years and it worked without problems during this period.

  However, I recently moved across country and since the implementation of my PC again once the scanner no longer works because the following error:

  "Failed to start the control center. Required registry information is missing. Please reinstall the Multi-Function Suite (CC3-001-00001901).

  So I uninstalled the suite already on my system so to re - install, and I now get:

  "There is not enough disk space to install. Brother MFL - Pro Suite requires at least 44 MB of free hard disk space. »

  I have 116 GB of free space on my C drive where everything is installed, so it's not logical to me, but now I can't do anything on my printer because the suite is currently uninstalled. How can I solve this problem? All the tips and advice would be most appreciated.

  If it is a USB connection, try a different USB port.

  1, however, make sure that all removed them from xp, go to my computer,.

  Search, search all the files (hidden & protected), with the results, delete all.

  Also, search using brother MFL - Pro, separate searches. Once through, go to

  run, type: regedit

  In regedit, expand HKEY_LOCAL_MACHINE, software, if its listed, R.click & clear. Close

  outside, expand: HKEY_LOCAL_USER, software, do the same thing, close regedit when thru. Back to

  run, type: folder

  In the new window, go to edit, select all, clear all, close when thru, (you can see the old

  brother Software installation data 3 years ago if the temporary files were never deleted), run Disk Cleanup.

  After all, stop pc, try a different USB port...

• "There is not enough disk space to record" warning - where at - it go?

  I just upgraded from Vista to Windows 7-32 bit.  There is a feature that I noticed the lack (or at least I can't).  On the list of the recordings scheduled, use to be a warning that says "it will be not enough disk space to record" - where he?  This is essential, since we are always close to edge of the exhaustion of the room, and I would not miss certain shows because I didn't know that I was running out of room.

  I changed all current records in 'keep for a week' and then restarted.  I then returned and changed their return to 'keep until I have delete' (38 of them) and restarted still thinking he thought he was set to "keep until space is needed.  Still no warnings.  Now I'm lost. Any help is appreciated.

  I'm the only do not receive the "It won't be enough disk space to record" WARNING?

• vshpere update utility not enough free space

  I'm trying to update my esxi 4 with the latest patches, but it keeps saying not enough free space

  the data store has 35 GB of free

  any help thanks

  I could be wrong of course, but it seems that you have a missing partition. Count the number of partitions and compare to what I posted. The VMKS is the data store. It has been reported here before. For some reason any partition was not created or it has been deleted. ESXi cannot be improved without this partition. At present the only work around is to reinstall. Since this is an installation on a hard drive, I think that you will need to do it from scratch. This means moving your virtual machines out of storage and then reinstalling ESXi. I remember that there was mention that there might be a fix in ESXi 4 U1, so you can wait until then. If anyone has more information please add your stuff.

• Compacting files: I get the message, "not enough disk space.

  Compaction stops, a message on "not enough disk space. I tried to delete the .msf file and also delete "inbox." Nothing works.

  The kind of details that really your search does not exist. Once I looked for something similar and some of these topics, I'm still trying to learn more.

  But I can offer some advice.

  IMAP. Words like Subscribe riffle and quota, inherent to the IMAP protocol and are not terms that you will find are defined in Thunderbird, or he has documentation. They are defined terms in the IMAP protocol, see RFC 3501

  Their isn't a such thing as a remote folder, but IMAP is synchronized. essentially local copies of the mail are a cache to speed up performance, although there are options for do not keep local copies. My experience is that it's slow. I'm assuming that IMAP, it is that what you call remote folders.

  Size limits on technical terms are difficult. Historically, Thunderbird has a limit of 4 GB per file. This has been deleted way back to IMAP. local POP e-mail accounts and local folder still have the limit, or at least bug if you exceed the limit. Whenever the developers think they killed the bugs, another arises.

  What files are compacted. Why all of them! Compaction has a dual purpose. In IMAP account it purge deleted mail from the server (a permanent deletion) locally the large amounts of wasted space are compacted to recover used space again by mail folders as being deleted. The physical elimination of the deleted mail only occurs during compact.

  Remove folder is as simple as right clicking them and selecting Remove. Some special folders and the local folders account space simply cannot be deleted.

  There is a manual here http://en.flossmanuals.net/Thunderbird/ but I do not think that it deals with the issues you have raised.

• cannot be synced because there is not enough free space to hold all of the items in the iTunes library

  cannot be synced because there is not enough free space to hold all the items in iTunes (required additional 194.8 MB) library.

  It is not supposed to because I have enough memory on my iPad.

  Help, please

  ckucharek wrote:

  It is not supposed to because I have enough memory on my iPad.

  Not based on what? You have not provided any information as to the amount of space you have left and what is the total capacity of your iPad. He must leave a certain percentage of the free capacity at all times, so if you have a 32GB device and you are up to 2 GB of free storage, which could in fact be severed close... If it says you need to 194.8 MG of free space that would be in addition to the amount that you see as free space.

  It also depends on what you're trying to sync on iTunes as well. What content, apps, songs, etc.

  So... can provide you more details?

• Not enough disk space to convert the iPhoto photo library

  My wife iPhoto library has about 9 500 photos. She has a MacBook Air, which has limited hard disk space, so we put his iPhoto library on a SD card (which is still in its SD slot). We decided to convert the iPhone photo library. When the process is started, it happens about 4% on the progress bar when a popup said that there is not enough disk space to perform the task (said to 72GO). How can I complete this process? She wants to ensure its iPhone and iPad Air can all share all the photos via iCloud. Can I put the library of Photos on the SD card too? Once the synchronization of library of Photos with iCloud, not all large digital images disappear from MacBook Air and only a miniature remain (like on the iPhone and the iPad)?

  I decided to try the procedure on my original post on my MacBook Pro.

  I copied the Library.photoslibrary Photos of my MBP to an external hard drive connected to my MBP.

  I did an "Option" + then click on 'Photos' selected the "Library.photoslibrary Photos" on my external hard drive. This produces the following pop-up message:

  "This library contains items to download from iCloud photo library".

  "To download the complete library, delete the incomplete elements, then set this library as the library of the system preferences and activate iCloud photo library. This will disable iCloud photo library on other libraries. »

  "Delete the incomplete items" or "quit".

  I clicked on "Quit" and posted above.

• Safari could not download because there is not enough free space on the disk

  Safari could not download the file 'MacKeeper.3.9.1.pkg' because there is not enough disk space

  You are very lucky, MacKeeper is a scam, do NOT download it

• Manual backup for PC. message "there is not enough free space.  My last backup is 1.3 GB, 124 GB available, without encryption.

  Manual backup for PC. message "there is not enough free space.  My last backup was 1.3 GB, four weeks ago.   My disc is 256 GB total with more than 162 GB available.  I do not use encryption. I am running windows 10 with 4 GB of memory system, iOS 9.2.1 and iTunes 12.3.2.35.  The only thing that has changed to realIy is the latest update to iTunes. I found this page and tried the steps.

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  I cleaned my recycling, did the reboot of my iPhone 5 s and my computer, disconnect all devices except iPhone and mouse, checked my security software (off), reset the lockdown folder.  Uninstalled/reinstalled iTunes 12.3.2.35.  No joy.

  I can do the manual backup on the PC of my wife, and she has more than 500 GB of available and uses the same version of iTunes, but on Windows 7.  Any ideas?

  Is the part of the computer which, by default, stores the backup on a smaller partition by accident?

  The part is \Users\yourusername\appdata\roaming\apple computer\mobilesync\backup.

  If this is not the case, the other thing I guess try would be to temporarily move the backups that exceed in this folder there and test if the prior backup is the problem of not being able to back up now.