"Backup failed. Not enough storage space.

Similar Questions

• Upgrade to 10.5 fails - not enough disk space in common Partition - db_hist using more space

  Hi all

  Tried upgrading our 9.0 (2) UCCX SU1 HA deployment 10.5 (1) last night and it failed with the following message.

  There is not enough disk space in the common partition to perform the upgrade. Please use the platform command line Interface or the tracking tool in time real (RTMT) of free space on the common partition.

  RTMT reported common disk space used as 94%. RTMT using we put the LogPartitionHighWaterMarkExceeded at 55% and waited for the disk space free. No luck.

  A bit more investigation and it turns out there is a database called db_hist_dbs in the common partition which is 33 GB in size. This is the command and returned the output that we used to find this point.

  See the common diskusage

  8.0 K/common/Ministry of health

  33G/common/var-uccx/CBD/db_hist_dbs

  1.6 G/common/var-uccx/CBD/temp_uccx_dbs

  201M/common/var-uccx/CBD/uccx_er_dbs

  1.6 G/common/var-uccx/CBD/uccx_ersb_dbs

  37G/common/var-uccx/dbc

  37G/common/var-uccx

  /Common/ontape_backup.gz 16 M

  8.0 K/common/cancel_upgrade

  Using this command - show uccx dbserver disc - we can see that the db_hist database file is actually 80% free! Output of the command here-

  SNO. TOTAL SIZE (MB) OF NAME OF DATABASE SIZE (MB) USED THE FREE SIZE (MB) TO ONE HUNDRED FREE

  ---- ------------------ --------------- -------------- -------------- ------------

  4 db_hist 34508,6 6836.9 27671,7 80%

  Anyone have any ideas on how to reduce the file size of the database in question? Is it still possible? Or what are our options to work around this problem and perform the upgrade.

  Thanks in advance

  Jeff

  You run in this bug: CSCul18667

  Symptom:
  Log purge CUIC is not clean file JMX. Upgrade may fail for lack of space.
  "show status" command s show that logging consumes 99% of space

  Workaround solution:
  Can remove by going to RTMT-> central tracking log & -> remote browse-> nodes-> 'specific node'-> UCCX-> Cisco Unified Intelligence Center Servicability Service-> jmx-> select all-> Delete

• When I try to access the services it tells me that there is not enough storage space.

  I tried to access the services to change some settings to see if I can get my printers and devices is displayed but I get the same error messages saying: there not enough storage is available to complete this operation. any ideas?

  Hello

  1. what exactly is the problem you are having with the computer?

  2. Since when are you facing the issue?

  3 are logged as administrator?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

• Upgrade to 4.1 failing - not enough scratch space?

  I'm trying to update a host of vsphere CLI 4.0 to 4.1 and I get this error:

  Cannot create, write, or read a file as expected. IO error (28) on the file: don't Err No 28 no space is available on the device

  According to me, that means I'm out of work space, and I found the article KB 1012640 but I don't know how to proceed.  When I look in advanced settings, zero Config the ScratchConfig.CurrentScratchLocation is set to/tmp/scratch.  What should I change to?  How do I know how much space is available in zero?  Is it possible to remove the unnecessary reset files to free up space?

  The host is a HP DL180 G6 with ESXi connecting a 2 GB flash device.  My local storage on the host is a raid 5 930 GB volume, is it possible to mount the scratch space on local storage?

  You must point to a directory on a data store. / tmp/Scratch is just a RAM disk

  / vmfs/volumes/datastore_name

• Windows Media Player cannot perform the requested action because there is not enough storage space on your computer. Delete some unnecessary files on your hard disk, and then try again.

  The message above when retrieving a 3 TB hard drive.

  1.98 to used and 759 GB free. (Current status).

  Windows 7 operating system. Current WMP

  Any chance WMP is unable to work with more than 2 TB of drives?

  Disk Cleanup shows able to win 0 bytes.

  Hello

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run Disk Cleanup to reduce the number of unnecessary files on your hard disk to free up disk space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

   

  Method 2: I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. click Start, type folder in the search box and press enter.

  b. press the CTRL + A, that will select all the content and Remove it.

  Once you disable this, follow these steps:

  a. click Start, click computer.

  b. open the C drive, go to the Temp folder and delete all the content and check if it helps.

   

  Method 3: You can also run the troubleshooting Windows Media Player Settings Troubleshooter & check if the problem persists.

  Troubleshooting of Windows Media Player settings

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  I hope this helps. Please reply back with the State so that we can better help you.

• Manual backup for PC. message "there is not enough free space.  My last backup is 1.3 GB, 124 GB available, without encryption.

  Manual backup for PC. message "there is not enough free space.  My last backup was 1.3 GB, four weeks ago.   My disc is 256 GB total with more than 162 GB available.  I do not use encryption. I am running windows 10 with 4 GB of memory system, iOS 9.2.1 and iTunes 12.3.2.35.  The only thing that has changed to realIy is the latest update to iTunes. I found this page and tried the steps.

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  I cleaned my recycling, did the reboot of my iPhone 5 s and my computer, disconnect all devices except iPhone and mouse, checked my security software (off), reset the lockdown folder.  Uninstalled/reinstalled iTunes 12.3.2.35.  No joy.

  I can do the manual backup on the PC of my wife, and she has more than 500 GB of available and uses the same version of iTunes, but on Windows 7.  Any ideas?

  Is the part of the computer which, by default, stores the backup on a smaller partition by accident?

  The part is \Users\yourusername\appdata\roaming\apple computer\mobilesync\backup.

  If this is not the case, the other thing I guess try would be to temporarily move the backups that exceed in this folder there and test if the prior backup is the problem of not being able to back up now.

• not enough storage for backup

  I s 6 more, 128 GB (not even near full... yet), iCloud is off (never use), and every morning for the past 3 weeks I've been doing the pop up that says that the phone could not be saved because there is not enough storage. When I touch the upgrade of storage, the pop-up goes away but me takes no parameters. I got the phone about 3 months so why this just started?

  You apparently do not have 'turned on' iCloud and backups iCloud activated, otherwise you would not receive this message.

• Cannot restore backup because there is not enough free space

  Try to restore from the latest backup and get an error message that there is not enough free space. How can be greater than the capacity of the backup phone? What the user should do?

  How free do to space you have left on the phone?

  Have you tried to transfer the contents of the camera to your Mac and remove the pictures after that in the phone, to get more free space?

  Because the backup will replace the contents of the camera as well, this should be no problem.

  If you want to restore, and then try again.

• In time real PXI-1031 does more work with labview. "Not enough disk space to perform the backup.

  The labview real-time project was working until a few weeks ago and the only error that is displayed on the PXI is this error message.

  "NEITHER Configuration Manager: not enough disk space for the backup" everything before that looks like it starts very well. Recently, I removed the hard drive and remove the 4 GB network log file because it seemed to me that a file of 4 GB on a fat32 file system was probably the cause of the problem. After that it the project worked when I tested it, but others in my lab said it was broken again the next day.

  Any help would be greatly appreciated because I don't know all that equipment.

  I found that I had "reset IP" set to "yes" in the bios that seemed to be causing my problem because I changed it to no and it seems to work perfectly now. Sorry that it took so much time to understand and I feel like a fool.

• Cannot complete the Windows backup "there is not enough disk space.

  Original title: backup error

  If you use windows 7 home premium backup & restore to backup errors program and says that there is not enough disk space when there are 1.2 to and the space required is 60 GB. Any suggestions?

  Check very carefully that the insufficient space, the error message can be generated by the disk you want to save not necessarily the destination drive.

  Backup Windows uses the VSS service who need free space on the drive to work. The cause is a lack of space on the system reserved partition and is generated by the VSS recorder.

• There is not enough disk space to create the shadow copy of volume of storage location 0 x 80780119

  Original title: create system image error - not enough disk space?

  I am trying to create a system image on my external hard drive reformatted with over 400 GB of free space. I get the following error message: «is not enough disk space to create the shadow copy of volume of the vault...» 0 x 80780119"backup should take up to 82 GB of disk space. I have more then enough available space.  External hard disk is formatted NTFS. My internal hard drive has more than 150 GB free. 64-bit Windows 8

  Any suggestions?

  Hi Mohammad,.

  I thought that's kind of a joke to check the drive on my brand new Microsoft Surface, but I figured it's worth a try. It worked! You are a genius, thanks man.

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• cannot be synced because there is not enough free space to hold all of the items in the iTunes library

  cannot be synced because there is not enough free space to hold all the items in iTunes (required additional 194.8 MB) library.

  It is not supposed to because I have enough memory on my iPad.

  Help, please

  ckucharek wrote:

  It is not supposed to because I have enough memory on my iPad.

  Not based on what? You have not provided any information as to the amount of space you have left and what is the total capacity of your iPad. He must leave a certain percentage of the free capacity at all times, so if you have a 32GB device and you are up to 2 GB of free storage, which could in fact be severed close... If it says you need to 194.8 MG of free space that would be in addition to the amount that you see as free space.

  It also depends on what you're trying to sync on iTunes as well. What content, apps, songs, etc.

  So... can provide you more details?