Upgrade to iOS 10.0.2 and phone won't

Tried to update the phone started to reset, but screen is now black (always on). No button does not

Try a forced reboot. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

If your iPhone, iPad or iPod touch won't turn on - Apple Support

Tags: iPhone

Similar Questions

  • After upgrading to iOS 9.3.2,and volume is very low when the reception or appeal of the mine

    After the upgrade to iOS 9.3.2,and I hear very low volume everything without or receive calls. Either side can hear properly

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

    My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

    You should be able to get the latest compatible version of the app Apple Podcast and other apps too:

    From when iOS 7 was released, Apple can now download the latest compatible version of some applications (iOS 4.2.1 and later only)

    Install the latest compatible version of an application on a previous version of iOS or OS X

    App Store: Download the old Versions applications

  • Since the upgrade to IOS 9.2 my iPhone 6 won't ring and goes directly to voicemail. The do not disturb, plane or silent mode is not enabled. I have reset the settings of the carrier and the phone is still going to voicemail. can I wind back to 9.1?

    Have you tried the usual bugs of restarting the phone, wipe it all away, activate and deactivate do not disturb, disable bluetooth and mode plane from suggestions from the forum. Think I should rest the IOS to 9.1 and not spend to 9.2. How can I do this?

    Thank you very much

    N ° you can not downgrade. Contact your operator.

  • Bridge of Sony for Mac. wanted an update, and phone won't turn on now!

    Hello

    Today, I tried to transfer files from my phone to my Mac. When I plugged my phone the Sony Bridge for Mac asked me if I'd like to update so I clicked Yes and it started to be updated with my phone connected. Then out of it, my phone off and it won't turn on. It will only vibrate and display the Sony logo but won't go any futher. I tried the combination of flight + and start/stop button and many others, but nothing works! I need my phone very quickly at work, and I really don't want to lose all the files!

    Help, please!

    It sounds more like you had an update to the system firmware and you can have disconnected your phone that this process was going on - anything you can do I'm afraid to say is a repair of the system, but this will erase all data on your phone

  • Where's my playlists? I have upgraded to iOS 9.2 today and all my playlists of music have disappeared.

    I can't find my playlists! So much work lost! Is it possible to recover?

    You do backup before the upgrade?

  • I have upgraded to iOS 10.0.2 and don't like it. Can I backward to the previous version?

    I want the old features, like the slide to get the keyboard for the access code. How to get back?

    Go to settings then general then accessibility, then scroll to "home" button. You can change the home button to work as before.

  • iPhone 6s + had some problems after upgrade to iOS 9.3.2

    1st issue is the battery. Already before the upgrade to iOS 9.3.2 since iOS 9.3.1 my battery iphone 6 s + last latency time approximately 40 hours. Now after the upgrade to iOS 9.3.2,and it last only 15 hours. I noticed that the battery went from 100% to 60% in 8 hours without using it. I change all the settings after upgrade.

    2nd question is Siri Spotlight search Suggestion. I see more suggestion of Siri (recent call log and recent applications) in the Spotlight search. I also noticed that, to start the Spotlight search, I need to get to the bottom of the home screen. Previously on iOS 9.3.1 when I push upwards, search Spotlight is cancelled and return to the home screen. Now in iOS 9.3.2,and it no longer works.

    I also-hard reset by pressing Start button / stop and the "home" button together until I see the apple logo. Who will not help too.

    Have you checked the battery in use/settings/battery? All apps using the battery more than usual?

    If the power to restart the phone did not help, the next step after that which could be set back to factory settings and restore form the last backup, especially if you updated using the option 'Over the Air '.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    For some users, removal and establishment of post counts once again solved the problem for others, connecting to iCloud and connect again after you stop the farm by a restart of drain.

  • Camera problems after upgrade to iOS 9.3.2

    My camera on the iPhone is block after having upgraded to iOS 9.3.2,and but I try to drag the video mode to make it work. The photo function is blocked. Help, please.

    I have the same problem. The camera is useless

  • Why my mini show iPad connect to itune when I try to upgrade to IOS 9.1.3? Please answer as soon as possible

    I'm trying to upgrade to IOS 9.1.3. and at the end of the loading on my ipad, my ipad mini display the thread with an arrow and the itune logo and it's write itune upstairs... And after I plug it into my computer and I do the proposed update (IOS 9.1.3) and I click Start and I wait until the end of the update and change anything, my ipad shows always the same (wire, the arrow, the logo and the word itune up)... What should I do?

    Please answer as soon as possible

    You are in recovery mode. You must restore your iPad via iTunes on your computer.

  • My dosnt mini iPad for upgrade to iOS 9.2.1

    I have a mini iPad and its old software and I'm trying to upgrade to iOS 9.2.1 and he says that there is an error

    What is the error message?

    Put you up to date via iTunes or OTA in the settings on the iPad? Try to update by using the alternative method you use.

    Have you tried another WiFi network if OTA update?

  • Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

    Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

    I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

    Nice day.

  • After upgrade the iOS 10, phone thinks it is in mode

    6 s upgraded to iOS 10. Now I can't change paper painted. notice on screen says phone is in low power mode. It is fully charged. Tried to empty < 20% battery, and then recharge. No difference. What gives? Thank you.

    Hi Bill Partsch,.

    I understand that you constantly see an alert that your iPhone is in low power mode, which is causing you to not be able to change your desktop wallpaper. I know it's nice to set up your iPhone to your liking, so I'm happy to help you.

    You started with charge it completely and even let loose a lot of its load before loading again. Let's you restart your iPhone so that we can give a chance to recognize the amount of the fee increase:
    Restart your iPhone, iPad or iPod touch - Apple Support

    Thank you for using communities Support from Apple. See you soon!

  • I wanted to upgrade to iOS 9 so I do it, and he beat by error 53

    Hello

    my name is s. mohsen and I'm from the Iran.

    Unfortunately, apple doesn't have any support in my country, but we love Apple products and use them.

    A few months ago, I bought an iPhone from a guy that I him no more after a few days I wanted to upgrade to iOS 9

    so I'm doing this and he beat by error 53 and I can't use it until a few days ago that I hear apple made a way to fix it.

    I was very happy and use the firmware to fix my iPhone, and then I see one apple linked ID, I can't active iPhone.

    Unfortunately I don't even know the guy that I bought and I don't know even what is the apple ID.

    I put all my money to buy and as you know products apple is very expensive in my country.

    I want to do something for me please.

    MEID: *.

    my iphone imei is: *.

    ICCID: unknown

    Sent from my MacBook Air

    < re-titled by host >

    You met the locking of activation.

    There is no way to bypass the blocking of Activation. Nothing can be done about it. Only the owner of the account that is used to lock can remove the lock.

    I'm sorry, but it is not important where you have lived in the world. There's no way beyond that.

    There is a very high probability that the phone you bought was stolen.

  • Cannot make or receive phone calls after the upgrade to iOS 9.2

    Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.

    Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.

    When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.

    I don't have to "do not disturb" lit.

    My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."

    I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.

    WiFi works.

    A related issue is to: IOS 9.2 update .

    OK, now it works.

    I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!

    For Ting (Sprint), here's what I had to do:

    1. to connect to a Wi - Fi network

    2. dial # 873283 #.

    3. press the call key

    4. press "Start Service Update" and wait a minute or two.

    5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.

    6. once the upper line shows that Sprint is connected, I could make and receive phone calls.

    Greg

Maybe you are looking for

  • iMac running slow!

    I have an iMac running El Capitan 2013. Sometimes, it seems that someone poured glue into the gears. Apple Mail is slow to respond. Programs to take a minute or two to open it. I try to look at the activity monitor at what is happening, but I don't k

  • I have Windows XP Home Edition and Windows XP Professional in my computer.

    I got the family origin of Windows XP Edition and when I got my computer Upgrade they added Windows XP Professional because they did not have Windows XP Home Edition so I tried to eliminate professional and Add XP Home Edition, so that whenever I tur

  • Switchable graphics problem on Pavilion G6 1130SL 8 64-bit Windows

    Hi all, this is my first post. I have a HP Pavilion G6 1130SL (upgraded to 8 GB Ram), OS: Win8 PRO 64-bit (OEM). My problem is with switchable graphics ATI RADEON 6470 M. I downloaded the latest driver for HP DRIVERS SUPPORT, but the (ATI) graphics c

  • RVS4000 &gt; ROUTER set to use custom dns?

    Here's my situation: my ISP assigns me a dynamic ip address. That's pretty standard. with my IP, I get my DNS settings as well. This is quite normal. I totally understand this. However, I want to use CUSTOM DNS. in windows, I can do this very easily.

  • Pen tool in Ultra key

    When a green screen overlay with "Ultra key", I use the pen tool to select the person who I want to composite.  After the outline of the person, I would expect the peripheral green screen to turn black as if I was using a cache of transparency.  But