Upgrade to vcenter OS = problems with ADAM

Similar Questions

• upgrade to vCenter 5.0 with update 1

  So, I update my environment vSphere 5.0 Update 1.  Updated forecasts to day went very well, but I have problems with vCenter.  When I run the upgrade, that looks like it happens to the installation of the profile-based storage, and then I got the error "the wizard was interrupted before VMwre vCEnter Server could be completely installed.  I consulted another debate that referenced KB 2007231.  I made the changes he ordered, but no dice.

  I found described similar problems but not quite what I'm trying to do.  Does anyone have ideas on this?

  I have attached the file vminst.log.

  Thank you

  SB

  File log says "VMware VirtualCenter-build-623373: 22/03/12 15:45:23 failed to install SP.". Check for the profile of storage service in the Services (Services.msc).

• Upgrade to vCenter 4.0 with Cisco Nexus 1000v installed

  Hi all

  We have vCenter 4.0 and ESX 4.0 servers and we want to upgrade to version 4.1. But also Nexus 1000v installed on the ESX Server and vCenter.i found VMware KB which is http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1024641 . But only the ESX Server upgrade is explained on this KB, vCenter quid?  Our vcenter 4.0 is installed on Windows 2003 64-bit with 64-bit SQL 2005.

  We can upgrade vcenter with Nexsus plugin 1000v installed upgrading on-site without problem? And how to proceed? What are the effects of the plugin Nexus1000v installed on the server vcenter during update?

  Nexus1000v 4.0. (version 4).sv1(3a) has been installed on the ESX servers.

  Concerning

  Mecyon,

  Upgrading vSphere 4.0-> 4.1 you must update the software VEM (.vib) also.  The plugin for vCenter won't change, it won't be anything on your VSM (s).  The only thing you should update is the MEC on each host.  See the matrix previously posted above for the .vib to install once you're host has been updated.

  Note: after this upgrade, that you will be able to update regardless of your software of vSphere host or 1000v (without having to be updated to the other).  1000v VEM dependencies have been removed since vSphere 4.0 Update 2.

  Kind regards

  Robert

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• upgrade windows vcenter 5.1 with oracle external to the appliance database virtual 6

  Hey people,

  We have a Windows external Vcenter 5.1 with an oracle database server. We would like to upgrade to an appliance Vcenter virtual v6 with an external oracle database. I was not able to find much info on this since most posts and blogs are based or sql.

  Is it as simple as deploying a new installation of a Vcenter virtuall device v6 and then connect it with our database current oracle and move virtual machines and turn from the old Server 5.1?

  GR,

  Michiel

  Welcome to the community,

  You can not skip vcenter windows 5.1 with oracle external to the appliance database virtual 6. You can improve windows vcenter 5.1 with oracle database external to vCenter windows 6.0 with external oracle database.

  From now officially VMware does not support migration from Windows to vCSA. But it is adventure, you can explore more

  https://labs.VMware.com/flings/VCs-to-VCVA-converter

  Concerning

• upgrade to 12 c - problem with AQ tables

  Hi all

  I'm trying to upgrade a 11.2.0.3 database to 12.1.0.2 (PSU 5) on Solaris-64.

  Upgrade throws an error as follows:

  Oracle Server

  ORA-24005: inappropriate utilities used to perform the DDL about table AQ

  SYSTEM. DEF$ _AQCALL

  ORA-06512: at line 30

  ORA-24002: QUEUE_TABLE SYSTEM. DEF$ _AQCALL does not exist

  ORA-06512: at line 19

  ORA-00942: table or view does not exist

  ORA-24005: inappropriate utilities used to perform the DDL about table AQ

  SYSTEM. DEF$ _AQERROR

  ORA-06512: at line 30

  ORA-24002: QUEUE_TABLE SYSTEM. DEF$ _AQERROR does not exist

  ORA-06512: at line 19

  I tried to run the statements manually in the database with the same result.

  Any helpful ideas?

  Thank you

  Michael

  Try to force these objects and then re-create them.

  sqlplus system/passwd

  dbms_aqadm.drop_queue_table exec ("' DEF$ _AQCALL", true);

  dbms_aqadm.drop_queue_table exec ("' DEF$ _AQERROR", true);

  If you MOS access check notice

  Invalid DEF $_AQCALL and _AQERROR $ DEF after Patch or upgrade (Doc ID 961104.1)

• The upgrade to vCenter Server 5 with a view Server 4.6 on a host ESXi 4.1

  We have guests ESX and ESXi 4.1 and just got a new host ESXi 5. We must now be upgraded vCetner to version 5 server in order to manage the new host. I know 5 4.1 manage vCenter hosts but do I need to be wary when it comes to the host that maintains the virtual computers view or the view Server 4.6 VM itself?

  According to the comapbility matrix View 4.6 is not supported under vSphere or vCenter 5.

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• Re-installing CS3 on computer upgraded to Windows 10 - problem with serial number

  I rebooted just CS3 after installing Windows 10 on my laptop. When I enter the serial number, I get a message that says that the number is not valid.

  Error: "serial number is not valid for this product". Adobe Creative Suite

• CS4 problem with background colors

  Hello

  I've recently upgraded to Dreamweaver CS4 from CS3. Since the upgrade I have a problem with the background colors for the divs layout. I can't make them appear.  I use a PC and use any programming on this other than xhtml and css work. I created a div named "main_content" so that I could change the background color. The div is written in xhtml as usual and color is listed in the CSS file as appropriate and the CSS file is attached to the html page and it's normal, but no color appears.

  For clairity, this is how it is implemented.

  < div id = "main_content" > content goes here < / div > <! - main_content - >

  In the CSS file is written like this.

  #main_content {background-color: #e1e1d6;}

  }

  It has always worked before, including at - it a bug or something in CS4 that I have to work around?  I would appreciate help with this problem.

  Thank you

  quicpic

  It should work. Are you sure there aren't any typos or a bad path to the css file? Can you post the whole code? It works, if you use the CSS dialogue window? If so, are there differences in the code?

  - Alex

• Upgrade from 5.1 to 5.5 - problem with VClient and inventory VCenter

  Hi all

  I just upgraded our VCenter of 5.1 to 5.5. All done successfully without warnings or errors. Verify that SSL certificates are still valid.

  Has decided to upgrade the databases too.

  Here's the problem:

  If I use the webclient service I have to use a user name in the format user@domain and then I connect successfully, but connected once the inventory is not empty, no host at all.

  If I use the VClient, it simply doesn't: failed (unable to connect to the remote server (o) connection.

  I tried to fix it by reinstalling the service inventory, but after that the error is the same.

  We have seen, it is because less 5.5 AD inheritance behaves differently, because it does not inherit.

  If you follow the steps on this link it should solve the problem for you.

  vCenter Single Sign-On not grateful 5.5 nested Active Directory groups. VMware vSphere Blog - VMware Blogs

  Kind regards

  Iain

• vCenter 5.5 | In case of disaster, lost database tries to upgrade, vCenter blue screen and now problems with vCenter rebuilt.

  There was a bug in vCenter 5.5 (go figure) where he tried to access a file in "C:\users" for some strange reason, she refused to install/configure SSO.  It took hours of VMWare support to force it to install by copying files autour in hand, trying to get the installer to recognize the file she needed to 'C\users '.

  Now, I have vCenter 5.5, with a new database and service WebClient is not configured correctly.  On the page where it asks to run under a local system account or a domain account, I've specified a domain account.  Well, the field is not the name of the server so I knocked on the server.local domain name FULL instead of the server's FULL domain name.  Now when I visit the URL of the web service client it says it cannot connect to vCenter he's trying to access the domain.local not server.domain.local.

  VMWare support tells me I have vCenter UNINSTALL and reinstall to fix.  This is ridiculous.  They try to tell me there is no other way to change this setting.  Are you kidding me?

  Ideas of the community?  VMWare help was very helpless in front of this whole situation.

  Thank you

  Cody

  It turns out that this error during installation is created by the presence of one! my user name.  Support said they will include a fix for this in a future release.  They also said the errors generated during installation could be ignored.  Everything seems not to work regardless of errors generated during the installation process (simple installation).

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• problems with upgrade of mavericks in el capitan

  I've heard of problems with the migration of iphotos to pictures photo library, are there any problems with it?  It's the only thing that keeps me from upgrading to el capitan, all my photos are in iphoto on Mavericks. Thank you!!

  As long as you have an updated version of iPhoto, bought on the Mac App Store, there is no problem. As always, back first.

• Problem with the upgrade to version 37.0.1 - update just "hangs".

  I am currently in Firefox 36.0.4 on a Windows 7 Pro computer. I tried twice to move to Firefox 37.0.1 WITHOUT success. Once the software is downloaded and start the upgrade, the upgrade appears just "hang" - nothing happens after 15 minutes, which is much too long to do the upgrade previous updates of Firefox have NEVER took this long and I never had any problem with prerequisites updated to Firefox! My Windows 7 has the latest Microsoft patches. I don't know why this is happening. Any suggestions? For now I give up trying to pass to the 37.0.1 version.

  He just go to www.getfirefox.com, download the new version and install it. All your data will be saved, but you will be running the most recent version.

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en