Upgrade to windows 8.1 and intel n 1030 wireless wireless not working not

Similar Questions

• I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

  Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

  Thank you for your help. Here are the answers your request:

  "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
  Complete error message: "Missing Component - required component Media Center is.
  missing. Please contact the manufacturer of your hardware.
  KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
  The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

  This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

  Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

  The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

  Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

  Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

  Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

  PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• Use and upgrade to Windows 7 Ultimate and professional from another country

  As part of a plant from South Africa, India, we have 3 desktop computers loaded with 1No. Windows 7 Ultimate and 2 amendments. Windows 7 professional OS. Can I use these desktop computers with operating system existing in India? Can I use the opportunity for these OS upgrade to WIndows 10 of the India?

  It should not be a problem.  In fact you can be upgraded servers anywhere in the world of.  Just because you are in a given country does not mean that you get the upgrade from there.  Microsoft balance the load on their servers so if in your country is busy other countries will be used

  Good luck

• Since the upgrade to Windows 8 Youtube and other videos flash will not play smoothly

  Since I've upgraded to Windows 8 Youtube and other flash videos will not play smoothly.  When I press play, the video freezes on an image and the sound is fine but the image is locked for several seconds.  So if it starts to play, he is so rough its not watchable.  If I pause the video and let it buffer for a bit and press play again it works usually smooth for 3-4 seconds in the rough again goes.

  This is the case with IE, Firefox and Chrome.  My computer is a HP DV7 3060 64-bit with 4 GB of Ram.

  I have tried to update drivers video, impossible to find the best drivers.

  Any help would be really appreciate as I really get annoyed by this and do not want to go back to Windows 7.

  Here are the video drivers for your graphics card.

• My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  Hi @Jake08,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and questions with external screen works not properly. You can try this without the connected external monitor.

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• I've upgraded to Photoshop CC (2014) and uninstalled the CC version, but 2014 works slowly, so eager to revert to the previous version. How to do this?

  I've upgraded to Photoshop CC (2014) and uninstalled the CC version, but 2014 works slowly, so eager to revert to the previous version. How to do this? I'm not able to find CC in creative cloud Manager and when I am trying to download via the web, there download the 2014 version.

  http://helpx.Adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. HTML

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• The upgrade to Windows 7 Professional, and I lost my installation CD Office

  I plan to upgrade to Windows Vista Edition full of Windows 7 Professional.  I understand that you need to do a "clean install" I also includes will wipe away all my programs Microsoft Office from my computer.  I moved once kajillion since I got my computer and I can't find the installation CD does that mean I'll have to buy it again?  Or is there a way around this?  Thanks in advance.

  Microsoft Office 2007 Download Center:
  http://www.Microsoft.com/Office/downloads/

  Requires that you have a valid Office 2007 product key.

  How to order an Office 2010 and 2007 disk backup:
  (for 2007 see the link located at the bottom of the page)
  http://www.Microsoft.com/office/backup/en-us/default.mspx

  How to replace Microsoft software or hardware,.
  order service packs and replace manuals:
  http://support.Microsoft.com/kb/326246

  ===========================================

  Requires a valid product key.

  Office 2010 (in English) with Service Pack 1
   
  Office 2010 Home and Student x 86
  http://msft.digitalrivercontent.net/Office2010/X17-75058.exe
  Office 2010 Home and Student x 64
  http://msft.digitalrivercontent.net/Office2010/X17-75161.exe

  Office 2010 Professional x 86
  http://msft.digitalrivercontent.net/Office2010/X17-75058.exe
  Office 2010 Professional x 64
  http://msft.digitalrivercontent.net/Office2010/X17-75161.exe

  Office 2010 Professional Plus x 86
  http://msft.digitalrivercontent.net/Office2010/X17-75238.exe
  Office 2010 Professional Plus x 64
  http://msft.digitalrivercontent.net/Office2010/X17-75612.exe

  For the Office 2010 Language Packs, see: http://www.heidoc.net/joomla/technology-science/microsoft/18-office-2010-direct-download-links

  Office 2010 downloads
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_install/here-are-the-download-locations-for-Office-2010/ac67aa2f-dc1c-46F4-8B1D-ca00b3f02a18

  Also: http://www.mydigitallife.info/download-office-2010-official-direct-download-links/

  ===============================================

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  J W Stuart: http://www.pagestart.com

• EPM 11.1.2.2 in upgrade from Windows 2008R2 Standard and Enterprise of Windows 2008 R2 square

  We have Oracle EPM 11.1.2.2 installed on our servers running in Windows 2008R2 Standard.

  The Windows 2008 R2 Standard in place upgrade to Windows Enterprise 2008 R2 will be affect the current Oracle EPM 11.1.2.2 installation? Is the high risk in a procedure like this?

  It should not cause serious problems, but I don't know the installation and the products that you have, there will always be a risk with any changes to the operating system, if you want to go this route, make sure you have a recovery strategy and if possible test the procedure for a non-production environment first.

• my administrator password does not work after the upgrade to Windows 7 Ultimate and can not get as administrator__

  Failed to get on as an administrator on new Wwindows & Ultimate

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• If I upgrade to Windows Media Player11 and don't like it, can I go back to WMP9?

  I am running Windows XP Pro and it came with the Player9.Everytime media I check updates, it wants to install WMP11. I don't know if I want to update or not.

  Thanks for the reply. I again how to avoid downloading the update, my concern was if I download and did not like it could I return WMP9, but I understood how do. Thanks again for the response.

• Why my computer keep asking an upgrade of windows solutioncentre.msi and tells me to insert a disk that came with my computer?

  What is windows solutioncentre.msi and where I get it so that my computer came with a disk which the program keeps asking me

  It is related to HP.

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/d4c72163-97f3-4D54-A4EA-193f82aa93e2

  If this post answers your question, click mark as answer .

• upgrade to Windows 10 now printer HP Officejet 6700 Premium does not work.

  I have upgraded to Windows 10 earlier today and now the printer HP Officejet 6700 Premuim no longer works. I found it to bind, but he says it has been disabled. How do you get to work?

  Welcome to the HP community @Nanabirchleaves,

  I saw that your Officejet 6700 no longer works after upgrade to Windows 10, and I wanted to tender hand. Start with printer HP install wizard for Windows, that will find and install the correct drivers, you will need on Windows 10 for the printer running. Try printing and scanning then and let me know the result!

  Best wishes to you, I hope that I have led you in the right direction

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• GFXUI and intel turbo boost monitor has stopped working

  I get errors that gfxui stopped working, and also that the intel turbo boost monitor has stopped working. Have installed all the drivers and installed their return. Also uninstalled microsoft NET framework and installed back. Always the same mistakes. What should I do?

  Almehand

  in the Panel "programs and features".

  Select "turn on or off windows features.

  then scroll down and look for ".net Framework 3.5.1."

  first disable and uninstall

  then restart the PC

  then, click on the checkbox to re activate .net Framework 3.5.1.

  Restart the PC

  Let us know if this solves the problem