upgrade to windows xp sp2

Similar Questions

• Error when MANUAL upgrade of Windows XP SP2 FOR wINDOWS XP SP3

  during the Windows XPSP2 MANUAL upgrade FOR wINDOWS XP SP3
  Following error is displayed, not able to verify upd ate.ini.ensure cryptogrphic services are running.i have checked & all the cryptographic services are running. Error continues. Unable to upgrade to SP3

  Start here:

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• recently upgraded to windows xp sp2 from sp1, now computer hangs at startup upward?

  Someone has no solution to the freezing at the start up

  If you have been running XP SP1 and everything just recently installed SP2, then I would be shocked to learn that your computer had not been infested with malware.  XP SP2 has not been supported for some time now and there has been no updates released for XP SP1 or XP SP2.  Without SP3 installed, your computer is a duck sitting for malware.

  I suggest that get rid you your computer of malicious software to reformat and reinstall Windows XP.  Then, immediately, before all else, install all the essential and important updates, including Service Packs.

  Be sure to only install a good antivirus before you venture out to surf the internet.

• The upgrade of Windows xp sp2

  Is it safe to download win xp sp3 and install win xp sp2 operating system?

  It has long been at the time to install XP sp3

  Prerequisites for a successful installation: http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx

  Steps to take before you install WinXP SP3: http://support.microsoft.com/kb/950717

• Satellite 2800-200: loss of bass/subwoofer after the upgrade to Windows XP SP2

  I've recently updated me for XP, but even after reinstalling driver Yamaha DS - XG on the Toshiba site, I seem to have lost the ability to control or to hear anything for two subwoofers on the front of the case, under the keyboard. I would like to know if they can be restored as the two speakers below the screen are not exactly hi-fi! Thanks for any help.

  Hello Gerald

  As you know, this unit is designed for Microsoft Windows 98, Millennium Edition, and the device is configured to work with the operating system that is supported. The list of whole software for this device is not known to me, but I assume that there is also something preinstalled to support the subwoofer function, but please don t ask me that. If you have preinstalled recovery image may be that you will be able to know what it can be.

  Now you have later the OS available on the device and it is logical and expect that you will also lose some special options. I'm afraid, there is nothing to do, and you have to live with that. Now, you have no option of subwoofer but WXP. I just hope that WXP runs stabile and without any problems.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.

  I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.  I have the CD SP2 Professional.  I need to remove SP3 so that can perform the update.  How can I do this?

  I ask why you "may need to be upgraded" Win XP (I guess) professional?

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  NB: If your computer came with WinXP SP3 preinstalled, you can not uninstall it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to upgrade my system windows xp sp2 to windows 8.

  Original title: upgrading system.

  I want to upgrade my system windows xp sp2 to windows 8. my system configuration is as follows...

  Udo of Intel core 2
  E4500 @ 2.2 ghz
  2 GB of ram
  graphic: Intel 82852/82855 GM/GM

  is it work? for this?

  First of all, check here if your system is compatible:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-Vista-XP-tutorial

  Second, consult the website of your computer manufacturer to see if they have the necessary drivers for your system to work with Windows 8. It is not likely.

• I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!

  I bought a used under Windows XP SP2 desktop computer.  I need to upgrade to SP3 to run MS Office Home and Student 2010.  I was not able to be upgraded.  Help!

  If I where to install SP3 I would choose to download the
  file and don't use automatic updates.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
  OR http://www.microsoft.com/en-us/download/details.aspx?id=24

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  If you use a third-party firewall brand, of course, it is up to date (latest version)

  Install SP3 in mode "clean boot":
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
  Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
  Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."

  The space of hard disk required for Windows XP Service Pack 3
  Describes the space of hard drive required for installation
  Windows XP Service Pack 3 (SP3)
  "For a PC on which Windows XP is already installed"
  http://support.Microsoft.com/kb/947311/en-us

  Install Windows XP Service Pack 3 (SP3)
  http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspx

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929/en-us

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480/
   
  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  Setup Windows XP Service Pack 3 offline

  I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  -David goods ETF investor

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  J W Stuart: http://www.pagestart.com

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• After upgrading my Windows Vista computer to SP2 double my user account icons.

  Original title: After upgrading my Windows Vista computer to SP2 double my user account icons. I'm not trying to delete one of them, because all of the account will be deleted.  How can I fix it?

  I use a laptop Lenovo Dual 32-bit CPU. My OS is Windows Vista Business.

  Hello
   
  Where it seems double?
   
   
  Method 1:
  Step 1:
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
   
  If step 1 work, try step 2
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
   
  If the problem persists, you can uninstall service pack 2, put the computer in start state in minimum mode, and then reinstall Service Pack 2 and see if that helps.
   
  Step 1:
  
  Perform the system restore and go back to a date when Service pack was not installed on the computer.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Step 2: Put the computer in a clean boot state.
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Step 3: Download Windows Vista Service Pack 2 here:
  http://www.Microsoft.com/download/en/details.aspx?ID=16468

• I am running Windows Vista SP2 Ultimate edition on my desktop and just upgrade to Windows 7 family premium, there will be a problem?

  Upgrade Vista 32 bit to Windows 7 32 bit

  You can't do it.

  You can only upgrade Vista Uptimate for Windows 7 Ultimate.

  Read more update on the link below:

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to upgrade Windows XP - SP2 for Windows XP - SP3 again?

  Sometimne in early 2013, I did a "factory reset" on my laptop, and after that he went back to SP2. Now, he can't go back to SP3 more because Microsoft has already ceasing to support SP2.

  Can someone please help me to update my WinXP SP2 for Windows XP - SP3 again?  Is it possible to send me the SP3 files and give me instructions on how to install it on my Windows XP - SP2 so that it will be updated to become WinXP-SP3 and can continue to receive auto-updates again.  Help, please.  Thank you.

  See tricky300 to answer a post above about the error:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-run-Windows-Update/387b478e-96cd-47E1-8851-a640e1ebd423>

  `~`

  The current time and the date now in Bhutan is

  14:16
  Wednesday, March 20, 2013
  Standard time + 0600 UTC
   
  UTC/GMT is 08:16 on Wednesday, March 20, 2013
              
  Current weather conditions in Thimphu

  Partly cloudy66 ° F / 19 ° C

• Can I upgrade a windows professional xp 2002, SP2, AMD Athlon (tm) XP 1800 + 1.50 GHz, 480 RAM for windows 7?

  I have an old computer with this syntactic:

  Windows xp professional 2002, service pack 2,

  Athlon (tm) XP 1800 + 1.50 GHz, 480 RAM AMD

  And I would like to upgrade to windows 7, but I can't use Windows 7 upgrade advisor, because it doesn't have internet acess.

  If it is possible?

  Thank you...

  480 MB of RAM?  No, don't do anything useful.