Upgrade Windows 2003 on-site

Similar Questions

• My CD drive is broken and I want to reinstall Windows 2003 however, I can't find the link on this site. Can someone direct me to it?

  Reinstall Windows 2003 MS site

  My CD drive is broken and I want to reinstall Windows 2003 however, I can't find the link on this site.  Can someone direct me to it?
  Thanks in advance.

  Hello ShazDongargon,

  Are you referring to Windows Server 2003? If so, please post in our forums Windows Server on TechNet:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problems upgrading to 2003 R2?

  I need upgrade Windows 2003 servers of some VM w / SP2 to 2003 Server R2. I wanted to see if there are any questions about or things I need to look for when our VM to 2003 R2 refresh?

  2K 3 R2 has no problem, SOME people report that 2008 R2 cannot get console connections.  We have 1 or 2 2008 R2 VM, and they seem to work well.

• Problems of Flash player v11 on Windows 2003 Terminal Server upgrade

  Hello

  I am trying to upgrade of several Server Terminal Server to Windows 2003 32-bit, v5.2 IE Flash plugin version 11.1.102.63.  It did not work on the first two servers I tried, and later I concentrated my tests on one of them.  The version on the server before the upgrade attempt has been 10.3.181.14.

  Whenever I try the upgrade, the executable initially runs, but then does nothing.  The running process is visible in the Task Manager, with no resources of treatment and about 18 MB of memory.  Unless I kill the process manually, it will sit like that indefinitely.  If I try the installation again, I get a message advising me that a single instance of the process can run.

  I tried to reboot the server, I tried to install terminal server mode server running the installation, I tried to uninstall the previous version, I tried to reinstall the previous version (which works fine).  For some reason, this version will not work.

  Any suggestions as to the next step would be very welcome.

  Thanks in advance.

  Paul

  How to do a clean install of the Flash Player?

• Upgrade of Windows 2003 to 2012 r2 DC replication problem

  Hello

  I added R2 2012 Windows server to windows 2003 sp2 (primary DC) DC and promotes as DC. After the promotion, I run dcdiag and it shows errors.

  Each of the servers have three NICs connected to different networks.

  Please help me with your expertise since I have to raise this Monday.

  Thank you

  Kind regards

  Charaf-eddine

  Here the dcdiag output new DC

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = CADPDC1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: connectivity

  CADPDC1.engineer.com host name resolution error by

  IPv6 stack.

  WARNING: could not confirm the identity of this server in the

  Directory and names returned by DNS servers. Host name

  fixed error 0x2af9 "host is known."

  ......................... CADPDC1 passed test connectivity

  Primary testing

  Test server: Default-First-Site-Name\CADPDC1

  Commencement of the trial: advertising

  WARNING: DsGetDcName returned information for

  \\cadpdc. Engineer.com, when we tried to reach CADPDC1.

  SERVER IS NO ANSWER or IS NOT considered AS APPROPRIATE.

  ......................... CADPDC1 was not able to test advertising

  Beginning of the test: FrsEvent

  There are warning or error events in the last 24 hours after the

  SYSVOL is shared.  Don't not SYSVOL replication problems can cause

  The Group of political problems.
  ......................... CADPDC1 test FrsEvent

  Commencement of the trial: DFSREvent

  ......................... CADPDC1 test DFSREvent

  Commencement of the trial: SysVolCheck

  ......................... CADPDC1 test SysVolCheck

  Beginning of the test: KccEvent

  ......................... CADPDC1 test KccEvent

  Beginning of the test: KnowsOfRoleHolders

  [CADPDC] DsBindWithSpnEx() failed with the error-2146893022,

  The name main target is incorrect...
  ATTENTION: CADPDC is the owner of the schema, but does not meet the DS RPC

  Bind.

  [CADPDC] LDAP bind failed with error 8341,

  A directory service error has occurred...
  ATTENTION: CADPDC is the owner of the schema, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of the domain, but does not respond to LDAP

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of PDC, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of RID, but does not meet the DS RPC

  Bind.

  ATTENTION: CADPDC is the owner of RID, but does not respond to the LDAP bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  meet DS RPC Bind.

  ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

  respond to LDAP Bind.

  ......................... CADPDC1 failed test KnowsOfRoleHolders

  Beginning of the test: MachineAccount

  ......................... CADPDC1 test MachineAccount

  Beginning of the test: NCSecDesc

  ......................... CADPDC1 passed test NCSecDesc

  Beginning of the test: NetLogons

  Cannot connect in the NETLOGON share. (\\CADPDC1\netlogon)

  [CADPDC1] An net use or LsaPolicy operation failed with error 67.

  The network name was not found...

  ......................... CADPDC1 failed test NetLogons

  Commencement of the trial: ObjectsReplicated

  ......................... CADPDC1 test ObjectsReplicated

  From test: Replications

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = ForestDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = DomainDnsZones, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Schema, CN = Configuration, DC = engineering, DC = com

  The replication generated an error (1727):

  The remote procedure call failed and did not execute.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:06.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: CN = Configuration, DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:07.

  1 failures have occurred since the last success.

  [Check the replications, CADPDC1] A recent replication attempt failed:

  From CADPDC to CADPDC1

  Naming context: DC = engineering, DC = com

  The replication generated an error (-2146893022):

  The name main target is invalid.

  The failure occurred at 2014-06-27 17:05:59.

  The last success occurred at 2014-06-27 17:01:21.

  1 failures have occurred since the last success.

  ......................... CADPDC1 failure test replications

  Beginning of the test: RidManager

  ......................... CADPDC1 failed test RidManager

  Commencement of the trial: Services

  ......................... CADPDC1 test passed Services

  Beginning of the test: SystemLog

  A warning event occurred.  Event ID: 0x000727A5

  Generated time: 27/06/2014-17:01:38

  The event string:

  The WinRM service is not listening to the WS-Management requests.

  A warning event occurred.  Event ID: 0 x 80050004

  Generated time: 27/06/2014-17:05:03

  The event string:

  HP 1 GB 2 332T adapter ports Ethernet: the network link is down.  Check that the network cable is connected correctly.

  A warning event occurred.  Event ID: 0xA004001B

  Generated time: 27/06/2014-17:05:06

  The event string: HP NC112T PCIe Gigabit Server Adapter

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was LDAP/cadpdc.engineer.com/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:39

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was ldap/cadpdc.engineer.com/*** address email is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:41

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was of cadpdc$. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:43

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0x000727AA

  Generated time: 27/06/2014-17:05:43

  The event string:

  The WinRM service could not create the following SPNS: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:55

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  A warning event occurred.  Event ID: 0 x 84350444

  Generated time: 27/06/2014-17:05:58

  The event string:

  Information System Officer: health: Post errors have been detected.  One or more errors of Power-On-Self-Test were detected when the server starts.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:05:59

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000410B

  Generated time: 27/06/2014-17:05:59

  The event string:

  The request for a new account identifier pool failed. The operation will be retried until the request succeeds. The error is

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:06:07

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:06:30

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041D

  Generated time: 2014/06/27 17:07:07

  The event string:

  The processing of Group Policy failed. Windows could not resolve the user name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:11:32

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 27/06/2014-17:16:33

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  An error event occurred.  Event ID: 0 x 40000004

  Generated time: 27/06/2014-17:16:38

  The event string:

  The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

  An error event occurred.  Event ID: 0x0000041F

  Generated time: 2014/06/27 17:21:35

  The event string:

  The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

  ......................... CADPDC1 failed test SystemLog

  Commencement of the trial: VerifyReferences

  ......................... CADPDC1 test VerifyReferences

  Running partition tests: ForestDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... ForestDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... ForestDnsZones passed test

  CrossRefValidation

  Running partition tests: DomainDnsZones

  Beginning of the test: CheckSDRefDom

  ......................... DomainDnsZones passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... DomainDnsZones passed test

  CrossRefValidation

  Running partition tests: schema

  Beginning of the test: CheckSDRefDom

  ......................... Schema passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Schema passed test CrossRefValidation

  Running partition tests: Configuration

  Beginning of the test: CheckSDRefDom

  ......................... Configuration test past CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ......................... Configuration test past CrossRefValidation

  Running partition tests: engineer

  Beginning of the test: CheckSDRefDom

  ... engineer passed test CheckSDRefDom

  Beginning of the test: CrossRefValidation

  ... engineer passed test CrossRefValidation

  Running tests of the company: engineer.com

  Commencement of the trial: LocatorCheck

  ... engineer.com passed test LocatorCheck

  Commencement of the trial: cross-site

  ... engineer.com passed test intersite

  Hi Chamarasi,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows 2003 domain upgrade to Windows 2008

  I have problems to find any information about it. I do a 10 minute presentation on the following scenario. Can anyone help or point me in the right direction

  • You have a Windows 2003 domain conisting of: -.

    
    

    1 x Windows Server 2003 AD

    1 x Exchange Windows 2003 Server

    1 x Windows 2003 file server and print

    1 x Aplicatiom in Windows 2003 Server (SQL, case)

    25 x Windows XP desktop computers / laptops

    
    

    You intend to upgrade/migrate to a 2008 domain. Need to consider the following:--

    
    

    Why update?

    What's new?

    What order/priority should take the upgrades?

    What are the best practices in rank?

    What are the problems that I am likely to encounter? Ried to solve the problem

  See you soon
  A dizzy

  Where's your homework due?

  Windows Update has nothing to do with the upgrade of Windows. Try to post in this forum instead-onlinehttp://social.technet.microsoft.com/Forums/en/winservergen/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 2003 Service Pack 1 free not updated from the Windows Update Site Security.

  For all 3 months one of our Windows 2003 servers that are not on the service pack 2 not available updated safety when you go to the Windows Update site.  They are available to the malicious removal tool and the stop bits, but nothing else.  The 2003 SP2 servers work very well.  Can someone help me with this?

  Thank you

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919.aspx

  Windows Server 2003 communities above link.

  Forum tab at the top.

  This is the Forum for Windows Vista update.

  See you soon. Mick Murphy - Microsoft partner

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Is it possible to upgrade Windows professional XP 2002 SP3 of Windows 2003 Standard R2?

  We have an old computer with Windows XP Pro 2002 SP3 server is installed.  There is also other software that we need on this issue to run new software, we want to install, but the new software is only compatible with Windows 2003 Standard R2.  So is it possible to XP to Windows 2003 Standard R2 level so that the settings and software on it are left alone - as it is with the Windows Vista upgrade to Windows 7?

  Thank you!
  Jon

  No, there is no path not upgrading to this version of Windows XP Professional.  You will need to do a clean install, which of course would not preserve your settings and/or other software.

• compatibility check tool to test the will to Windows 2003 R2 x 32 upgrade to Windows Server 2008 RTM x 32

  Looking for specific compatibility check tool test the will to Windows 2003 R2 x 32 upgrade to Windows Server 2008 RTM x 32

  Hello

  Please click on this link for more information

  http://TechNet.Microsoft.com/en-us/solutionaccelerators/dd537573.aspx?CA=not&Su=WINSVR&SA=map&CT=webs&CN=MSCOMWEBS&au=BDM&go=MAPTN&DT=04012009

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• upgrade in place windows 2003 32-bit

  Hi all

  I have a problem, make an upgrade on the spot of a machine virtual windows 2003 32-bit to 32-bit Windows 2008. I need for it that the applications running on the existing operating system is not compatible with 64 bit OS. All is well until the last step "Completing upgrade" up to 52% then start restart and just never came up. If I'm going to "Safe Mode", it stops on Windows\system32\drivers\CRCDISK. SYS when trying to load the drivers. I tried loads of options none of them worked. I'd appreciate any help.

  Kamran7446

  Hello

  The controller is parallel LSI. I managed to solve the problem with a little to manipulate the operating system. I had to make some registry changes (system32\config\...) and reboot several times, that upgraded with little success. Then I had to upgrade a Windows 2008 to windows 2008! Yet one more time to work things out. I know it sounded strange. At the moment he works and as I mentioned the current controller is parallel LSI. Thanks for your reply.

  Kamran7446

• the upgrade of windows 2003 standard edition to enterprise edition

  Hello
  
  Currently, we are conducting 32-bit essbase in windows 2003 standard edition 32 - bit os. We are planning to upgrade to windows 2003 enterprise edition 32-bit os (or) windows 2003 standard edition 64-bit operating system...
  
  so in this scenario
  
  1 > my current essbase applications will have no effect (or). ???
  
  2 > if aplications get impact what could be the possbilities for this scenario...?
  
  Published by: 854925 on April 26, 2011 22:26

  With Essbase you should not all the problems of your switch/bet far Win 2003 Enterprise Edition.

  If you are moving to x 64 Win Server you will probably have to do a full install on a new machine in which case you will just be transfer (.otl) schema files, etc. for the Essbase Essbase Server to the new. So no effect as long as you install more Essbase on x 64 don't box correctly.

• UPGRADE WINDOWS 2000, 2003 OR 2008 WITH EBS - 11.5.10.2 AND DB 10 GR 2

  Hello...
  
  We have a new project to start upgrading windows 2000 to 2003 or 2008 (Wich is better). As I would like to know what our options here .all reference will be more useful.
  
  
  I think the cloning option. What do you think?
  
  
  Thanks in advance.
  
  
  Kind regards

  Hello

  We have a new project to start upgrading windows 2000 to 2003 or 2008 (Wich is better). As I would like to know what our options here .all reference will be more useful.

  You would need to go with Windows 2003, Windows 2008 is not certified with 11i - see (update on the Installation of Oracle Applications Release 11i (11.5.10.2) [316806.1 ID]) for more details.

  I think the cloning option. What do you think?

  You can use quick Clone to clone the instance of Windows 2000 to Windows 2003 in accordance with the following documentation.

  Documentation fund quick Clone, version 11i and 12 [799735.1 ID]

  Or, you could simply upgrade the operating system directly, and in this case, please make sure that you follow the steps described in these documents.

  Note: 356878.1 - how to recreate a link to all of the Installation Applications 11i
  Note: 407055.1 - process to upgrade the operating system and the Oracle database server

  Thank you
  Hussein

• the windows 2003 functional level upgrade

  Hello

  We run windows 2008R2/2012R2 controllers and single forest and some of the Member servers are runing windows 2003. My qustion is what is the impact of changing the domain functional level and forest to 2008R2 in order to use the new futuer in windwos 2008R2 as the (Fine-grain endof password) FGPP?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The task request becomes Error 403 - Windows 2003 CF9

  My test server is Windows 2003 and IIS 6, CF9.0.2 with SQL Server 2008.

  About 3 months ago, I received a few a slowdown of security on the property of the directory I had installed CF on.  So I had to change the owner of the car.  Not a big deal.

  About 4 weeks ago, I started to receive an "error during the execution of task 403 Forbidden" in the file scheduler.log every time I ran a job through the Scheduler.  So, I thought it had something to do with my recent change of ownership.  I uninstalled and reinstalled CF9.  Still getting the same problem.  Not a big deal I think just a test server and I have a deadline to upgrade in March, production is under Windows 2008, go to 2012 Windows, CF11, etc...

  Come today and I have a production problem, and I need to run a test through Scheduler file.  I forgot that the Scheduler is to launch 'Error while executing tasks 403 Forbidden' during the execution of any job.  I go out to search the logs of Windows, and low and behold, security had expired the IUSER_machinename and IWAM_machinename accounts passwords!  So, I went ahead and changed the passwords on these accounts, but still am receiving the "error during execution of task 403 Forbidden" error.  Any suggestions?  Permissions had not changed after I re-installed CF.

  Thank you.

  Libby H

  After having read a couple of your answers, I went back to look at my IIS configuration with my way for the scheduled task.

  Yes, I got the IIS Web site a separate just for scheduled tasks - and I returned to the new password for the IUSR_computername account.  I looked then the SSL certificate (Edit under secure communications) and it must have reset the checkbox on the 'request a channel secured (SSL).  Unchecked the box, applied and tested.  Work proceeded to the success.

  Thank you both, Carl and Alexandre helps you.