After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

Similar Questions

• When you try to download a program, I click Run and the download window not displayed, why?

  When I try to export my banking info in Microsoft Money, I used to then export a money window would pop-up and invite me to open the file.  I no longer get this window.  In addition, I tried to download Google Earth, I get the bar at the bottom of the options page to run, save, or save as.  I usually click on run in this case and it works fine but now I click on Run the window disappears and nothing happens.

  Hello

  • What browser do you use?
   
  If you are, you use Internet Explorer, you can view these methods:
  Method 1:
  You can try to reset Internet Explorer and check.
   
  Here is the link:
   
  http://support.Microsoft.com/kb/923737
   
  Method 2:
  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.
  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My Windows Update does not work. When I try to access it, a box flashes on my screen, but I can't access it. I tried to use Windows Update via on line, and the same thing happens. Help!

  Too bad.  I managed to do the work.  I will now reboot and see if it solved the problem.

  OK, I restarted.  Always impossible to get Windows Update to happen on the screen.

• Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Ref: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-0x800f0102/eefc1d5a-2f89-4676-82fb-1d76debbd13f

  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

• When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  Outlook:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  They will help you with your Outlook questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.

  original title:wiaacmgr.exe

  I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera.  My problem is almost the opposite!   Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start.  But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use.  If I close the window...  Not much, but it's a nuisance.  I would be happy if she has proposed to launch work stations.  I then click on the box "Make this every time" and will never see the window.  Otherwise, I'd be happy to remove the program completely.  Can someone tell me how to achieve one of these?  S ' Please!
  Jim

  Hello

  I suggest you to return the item and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing

  Hello

  Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.

  Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?

  Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.

  Please, any advice on this will be greatly appreciated.

  Alan

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• XP Pro - why, when I do a windows update, all of the updates do not settle

  Yes, I know not support XP is completed. However, when I do a windows update all below fail update. If support has over why they appear as available/required?

  Microsoft CAPICOM

  Security Update for CAPICOM (KB931906)

  Microsoft Windows XP

  Update security for Windows XP (KB2862152)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  Update security for Windows XP (KB2914368)
  Update security for Windows XP and Windows Server 2003 (KB2917500)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2901110)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2901111)
  Update security for Windows XP (KB2909210)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2898855)
  Update security for Windows XP (KB2916036)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2898856)
  Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2836941)
  Windows XP end Notification Support (KB2934207)
  Update security for Windows XP (KB2930275)
  Update security for Windows XP (KB2929961)
  Update security for Windows XP (KB2922229)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2936068)
  A security update for Internet Explorer 8 for Windows XP (KB2964358)
  Windows malicious software removal tool - July 2014 (KB890830)

  Microsoft Office 2003

  Update for Office 2003 (KB2760494) security
  Update for Office 2003 (KB2850047) security
  Update for the junk e-mail Filter Outlook 2003 (KB2863822)
  Implementation of security update for Word 2003 (KB2878303)

  Microsoft Silverlight

  Update of security for Microsoft Silverlight (KB2932677)

  Microsoft Office 2010

  Update for Microsoft Office 2010 (KB2825635) 32 - Bit Edition

  Microsoft Office 2007

  Update of security suites for Microsoft Office 2007 (KB2878233)
  Update of security suites for Microsoft Office 2007 (KB2880513)

  is BITS service to automatic?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-issue-error-0x80246008/c1cbb5c5-6f5a-4190-8347-afeade856aab

  in the link above, read the thread through and then follow the instructions of Keith Jones_770

• When I perform a windows update I get error code 80070643 _

  I am running windows 7 home Premium (64-bit).

  I have MS Office 2010 installed as well.

  My problem is the following:

  Whenever I'm doing an update of windows, all updates will install successfully but one. Its an update with the title "update of security for Microsoft PowerPoint 2007 (KB 957789).» And the code error 80070643.

  This update still fails to install. And is flaged as an important update. Also, I don't understand why it appears in the list of updates because I don't have MS Office 2007 is installed. The MS Office installed on my laptop is MS office professional 2010. And I never installed another version of MS office on my laptop except MS office 2010.

  I also noticed that whenever I stop my PC the same message appears saying: "1 update is installed, do not unplug your pc.  I don't know if it's related to the problem or not.

  Help, please.
  Thank you

  I solved the problem.

  No more update "Security Update for Microsoft PowerPoint 2007 (KB 957789)" appears when I do a windows update and no more the messege "installation update 1 of 1 in the process... etc" appears when I stop my machine.

  That's what I did:

  1 not installed MS Office 2010

  2. run windows update and everything was nice and smooth. And the update "Security Update for Microsoft PowerPoint 2007 (KB 957789)" does not appear in the update list.

  3 - I stop my machine.

  4. restart the machine and re-installed MS Office 2010.

  Everything is nice and smooth and no error appears when you perform an update.

  Can someone explain what the problem was?

  see you soon

• When I open a window I get C:\program files\mozilla firefox\eula exe; then I don't get any web page

  When I open a window I get C:\program files\mozilla firefox\eula exe; file not found

  Perform a cleaning (re) install:

  • Download a new copy of Firefox and save the file to the desktop.
  • http://www.Mozilla.com/Firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not erase personal data if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• Error code: 80070020 when I do a windows update.

  I had this error before code and had to reinstall Windows Vista from the CD. What I still do? I do not have a certain update - error code 80070020. In ADDITION, the computer crashes too often - what can I do to fix this? Or what can you do?

  * Title *.
  Error code: 80070020 when I do a windows update. In addition, why my computer freezes up all the time?

  justbuself,
  Please post with the information requested here: what to post in the Windows Update forum.
  Go through this article, and then do the listed troubleshooting steps.  Post back with the results. http://support.Microsoft.com/kb/883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.