upgrading from CS2 to 8 items

Similar Questions

• Upgrade from CS2 to CS3? (for Windows XP)

  Hi, guys. I'm new here. And I only signed up for the forums so I could ask for help! Haha! So, let's go...

  I recently started using Adobe CS2.

  I signed up for the 30 day trial of RadLab by Totally Rad. It worked fine, but my trial expired before I could finish the pictures that I had been editing. So I uninstalled the RadLab trial, signed for a new trial with a different and re-installed e-mail address. Only, this time, RadLab would not work. So I contacted Totally Rad and the guy told me that RadLab won't work on CS2. It must be CS3 or higher. (I'm still confused as to how RadLab worked 30 days on my CS2 if it only allegedly works on CS3 or higher)...

  So now, I'm looking to move from CS2 to CS3... but I don't know where to look. I tried Google, but nothing seems to match what I'm looking for. I wouldn't be upgraded all the way up to CS5, because I don't think that my PC can handle. (I was informed that CS5 takes a lot of space, and I don't think that my computer is strong enough to hold it all. My abilities are very limited. Even with CS2, I couldn't open/edit all at once.)

  I say all this, to ask the following question...

  How can I do to upgrade from CS2 to CS3, and it cost me an arm and a leg? I'm on a very tight budget ($150 is the highest absolute , I'm ready to go). I am unemployed and money is very tight.

  Thank you in advance for your help!

  Hi country... I just checked and RadLab also works with Photoshop Elements, and it's only about $75 right now!

• Upgrade from CS2 commercial education full CS5?

  Hello

  I'm new to this forum. I have a question about upgrading to CS5. I don't think that there was another question on this specific issue I have. If there is, I'm sorry to see it again.

  Basically, I have a copy of version CS2 Design Premium Education. Now, I would like to upgrade to CS5 Design Premium Commercial version. I didn't need to work from home before, so never really need commercial license for my laptop. But now it's time to get one, so I can work anywhere.

  I know there is an upgrade from CS2 to CS5 version I can buy, but it doesn't tell me if it can be used on the education version too.

  Can someone confirm that the upgrade works on an education version too?

  Thanks heaps.

  
  Leanne

  You can use the teaching license to upgrade to a commercial license. In fact, it's one of the reasons that adobe has created the educational license to encourage you to purchase a commercial license when you went out on your own. However, you new license replaces the old. You cannot use the old computer software one and simultaneously use the new license on another computer.

• Migration of a version upgrade from CS2 to a new computer

  I have an upgrade copy of CS2 (I've upgraded from photoshop 5 and 5.5 to CS2). CS2 is installed on an XP machine and now I want to move to a Windows 7, but when I come to put my serial number, he wants me to point to the previous installation of photoshop (as an upgrade). I can not put the original PS5 on the PC so I need it because I lost the original disk. Anyone know how I can get around this please?

  Thank you

  Ian

  Hello

  You can enable is no longer a copy of CS2, please see more information download Acrobat 7 and CS2 products

  ^ Ani

• Get the new iMac - how upgrade from CS2

  I get a new iMac in a few weeks and it will come with the new Snow Leopard operating system. I'm currently under Photoshop CS2 on a Powerbook running 10.4.11.

  I know I need to switch from CS2 to CS4 to run Photoshop on the new iMac. What is the best way to do it? I don't think I can even install CS2 on the 10.6 iMac and have little place on my poor Powerbook first he set up.

  It would be wonderful if I could keep the CS2 version running on my Powerbook and install a version upgrade of CS4 on the iMac. Is it still possible?

  Download the upgrade to CS4 from CS2

  When you install CS4 update on the new Mac simply enter CS2 serial number when prompted.

• How can I download previously purchased Photoshop 5.0 so I can install the upgrade from CS2?

  Can not find the CD but have serial number. Need the 5.0 version to install the upgrade to CS2 and it was on the old computer

  If your ultimate goal is just to have photoshop cs2, then even if you had your ps 5 CD, it will do you no good, since adobe disabled for photoshop cs2 activation servers.

  You can download no activation of photoshop cs2 and use the serial number on the download page.

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Install CS5 UPGRADE from cs2 on Windows 8

  I just bought a Windows computer running Windows 8, and I want to install it on CS 5. But I CS 5 is an upgrade, so it will not install I did not already have CS2 (my previous version) on the computer, and CS2 installs on Windows 8. What should I do?

  I don't have CS2 (my previous version) already on the computer,

  You don't need to have installed CS2.

  If CS5 upgrade Setup cannot find an eligible earlier version installed then it will prompt you to enter the serial number CS2 instead.

• the upgrade from cs2 to cs5

  Hi, I have a copy of CS 4 somewhere and I also have CS2, I found. I want to upgrade to CS4, 5 or 6... whatever it is compatible with the OS of Maverick.

  Not crazy about how shopping for creative cloud is set up. I don't need every month and would buy more like copy complete, tax only once.

  CS6 is the only Creative Suite sold by Adobe.  If you want to buy it, you can do so through the following page, but CS2 or CS4 are eligible for buying CS6 an update, so you should buy the full version.

  Creative Suite 6

• Can I upgrade from Photoshop CS2? [A: Novice Newbie Question...]

  Complete the beginner artist only to learn PS and love it.  A free download CS2 year last of the Adobe site.  Have very limited internet usage, cannot use CC (cloud?) so I have to work offline. Can I upgrade to CS5 or?  Thank you!

  Some points to note here since the responses you have received so far are not quite accurate:

  1. Download of CS2 that you used is not free. It is provided to people who have already paid for CS2. Anyone can view the page, download the software and use the serial number (no one knows why Adobe did), but it is intended only for existing customers.
  2. There is no upgrade from CS2. He's too old. You can not upgrade to CS5 or CS6.
  3. Your options are to buy a new full version of CS6 or join the Cloud
  4. The cloud doesn't have a continuous internet connection to be used. You download, install and run Cloud software the same way you always have. An occasional internet connection (all 99 days or less) is required for a check of the license, that's all.
  5. Before commit you to any purchase, make sure that your computer and operating system meet the requirements to run the latest version of Photoshop. Much has changed since CS2.
     Configuration of Photoshop

• How to upgrade from Photoshop CS2 to CS5

  I had been using 2 CS since 2005 and if he's still a very good application I've been frustrated by the need to frequently renew activation. Then removed from my system at the beginning of this year (20100 and used another application.) But after trying CS5 on a friends PC I was impressed and decided to buy the upgrade from CS2 to CS5. I want to kow if I have to reinstall CS2 or can clean install CS5 I prefer. ?

  Onclejean

  London

  Thu, 14 Oct 14:43 GMT

  If you deleted and that you have not used the cleanup utility then you should be able to put CS5 disc and run it. The software will ask for the serial number CS5 and can detect CS2 and not ask for serial number. If this isn't the case, then you must enter the serial numbers.

• While Windows anytime upgrade from Win7 Home Premium to Win7 Pro received the notice that failed.

  Original title: upgrade Express failure.

  I'm doing an anytime upgrade from Win7 Home Premium to Win7 Pro. I get a notice that failed and get back to home premium.

  Any thoughts would be appreciated.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• On Windows 7 upgrade from vista 64 bit stops after that it says the settings and files of collection

  I am tring to install Windows 7 upgrade from vista 64-bit.  I'm to the point where it says collect files and settings, and it stops running, and then in the details it shows 3 files located in the c: users\my name\appdata\local\temp\WER followed by numbers.tmp, then version, appcompat or mdmp. (example: wer5090.tmp.version.txt)  He said that these files are the reason. Any ideas how to solve this problem?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  If the upgrade continues to fail, you might want to consider doing a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• creating 14 elements shows no mpeg file after upgrade from 13

  After the upgrade from Premiere Elements from 13 to 14 files mpeg do not open in the project window.  I tested the files in other applications and that they play.  I downloaded Dvix and it shows the MPEG files and MPEG codec is installed.  These files have played in the first 13 items.  I also converted the MPEG in AVI files and avi version plays in other applications, but not in first 14 elements.  No idea why?

  Ann Bens, thanks for the reply.  I renamed the folder that you have proposed.  The mpeg file were not protesting, but I saw an option when I right click the file name to replace.  I replaced it with himself, and he appears.  To be clear, I also uninstalled first items 14 and reinstalled. I don't know if the relocation or change of name of the folder or both has solved the problem, but the software works as advertised.

• Upgrade from Siebel 8.1 Production & Data Guard

  Hello
  We will have new material available for Siebel upgrade 8.x pre-production several months in advance. This material will be the same of prodcution with regard to size. We plan to use 'DataGuard' for Siebel 77 DB (2.5 to) replication on the new Siebel 8 DB pre-production server. My requirement is to have minimal downtime!
  
  I'm thinking next steps upgrade before the deployment weekend.
  1. take cold Siebel 77 PROD DB Backup
  2 database copy 77 PROD to the new pre-production Siebel 8 DB
  3. install and gateway of Siebel server, server Siebel, Siebel utility of database server and the Siebel web server extensions
  4. install the database schema and seeds
  5 import the new repository of Siebel 8
  6 test the application
  7 stop Siebel application and get ready for deployment to production
  
  Deployment weekend production steps:
  1. stop Siebel 77 application and DB
  2. start Siebel 77 DB data replication in the new Siebel 8 DB
  3. after the replication is complete, start Siebel 8 application.
  
  Can one that the steps above from the end of week of the production deployment might work, which means "DataGuard" replication to keep my DB Upgrade from Siebel 8 intact and wipe it away? I try to avoid the installation/configuration/upgrade to level the application during the deployment weekend.
  
  I'm lost and confused on how the upgrade of production will work. I have read several messages online, upgrade guides and haven't met good information/help for upgrade of production, all the support, the items are for the modernization of development environments!
  
  Please note that the 'Golden Gate' is not an option, do not have a budget for that!
  
  I'd appreciate any help.
  
  Thank you
  PM

  Now that you have added the stages of the upgrade, it is logical but there is no doubt some additional steps are required as you progress...

  regarding the statement:

  "I think that 'install & configure the Siebel servers' can be done before weekend of deployment without a database active, can anyone confirm that for me?"

  It might indeed and this could also be done on a copy of your development DB Upgrade environment. Siebel installation is not dependent on your DB, but there are some entries in your DB, which can be Siebel specific server, look at the guide for the copy of production if you don't understand what I mean. Restoration of Production environments in the Test [477772.1 ID] environments. If you move servers during the upgrade this guide will give you some tips too to areas that you need to consider.

• Tag not created after the upgrade from 9i to 10g

  We upgrade from 9i to 10g - time - and we hit some "unexpected."
  
  If I run

      SELECT  xmlelement("TestMsg",
                      XMLFOREST(m.tx_id   "MsgNum",
                                m.tx_type "MsgTyp"
                                ) MESSAGE -- this is the alias for the XMLFOREST item 
                      ) ut_xml
      FROM (select 1 tx_id, 'test' tx_type from dual) m

  on my 9.2.0.4 database, I get
  

  <TestMsg>
    <MESSAGE>
      <MsgNum>1</MsgNum>
      <MsgTyp>test</MsgTyp>
    </MESSAGE>
  </TestMsg>

  -an additional label is created according to the XMLFOREST item alias.
  
  on my 10.2.0.4 database, I get
  

  <TestMsg>
    <MsgNum>1</MsgNum>
    <MsgTyp>test</MsgTyp>
  </TestMsg>

  No MESSAGE tags.
  
  Some XML parsing we take into account this MESSAGE tag and so is now breaking.
  
  I guess my question is to know if we have messed up the installation of XMLDB or if 9i conduct was wrong and we should change the analysis of the behavior of 10g.

  The current behavior is correct, the old behavior is incorrect. Raising an SR will not help unless there is a very strong business case to ensure backward compatibility for the incorrect behavior in an event. Workaround are change code analysis to deal with the new format, or change the code that generates the XML code to include additional call to XMLElement