Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

Similar Questions

• I reinstalled Windows Vista and now I can't run "repair your computer".

  I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• from windows vista and now I have xp home edition and dvd player does not properly.trying to load students teachers Microsoft office 2003 edition of the disc and it won't work.

  DVD player does not.

  Hello Deltadiver,

  Thank you for your message.  Have you downloaded/installed the latest driver for your computer?  Access the manufacturer's Web site and search for your type of computer, from there, you will need to get the latest driver for your CD/DVD-ROM drive, make sure the driver you get is for Microsoft XP.  Please let us know if you have trouble with this and we can help you further.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• try to connect to the network, need help.

  * - Original title - Help network!

  Im trying to connect to my network, but it won't let me go up. It says im not connected to any network, but im allowed to get on the internet... the network in the try icon has a red x through it, and no matter what im network I can get on the internet but not on the network. What should I do to fix this? I tried all of the troubleshooting steps and he says that there is nothing wrong,

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the full error message you get when you try to connect to the network?

  5. What are all the steps you've tried?

  6. how many computers is connected to the network?

  7 is the computer connected to a home network or domain?

  8. do you have a wired or wireless?

  Method 1.

  I suggest you follow the steps in this article.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2.

  How can I solve the network card problems?: http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems

  Method 3.

  a. click "Start", go to run, type "services.msc" (without the quotation marks) in the Open box and press ENTER.

  b. click on the button continue to check the permission of the administrator.

  c. 'Knowledge of network locations' service right click and choose Properties.

  d. under the general tab, click Start.

  e. click next to automatic startup type.

  f. click OK.

  Restart the computer and check.

  Method 4.

  If the problem persists, please take a screenshot of the window "network and sharing Center" and upload it. After the screenshot of the problem you are experiencing. Click on the link: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-c620-401c-a804-9f6337cd3053

  I hope this helps.

• Error: failed to create or save new files in the folder where it was downloaded during the upgrade from Windows Vista to Windows 7

  Original title:

  Attempt to upgrade Windows Vista to Windows 7

  I try to update my Windows Vista to Windows 7. I bought to download the rom update the Microsoft store and downloaded, but when I try to start the upgrade I have a stateing message that it is impossible to create or save new files in the folder where it was downloaded. I checked the security permissions in the file and made sure that no programs are 'read only', but it won't always go beyond this point!

  Hello
  
  What is the edition of Windows Vista installed on the computer?
  Make sure that you upgrade to the correct version, some versions of Windows cannot be upgraded with the installation disc you are trying to use. For example, you cannot upgrade a 32-bit version of Windows to a 64-bit version, or upgrade a higher edition of Windows like Windows Vista Ultimate Edition, to a lower edition, such as Windows 7 Edition Home Premium. If this is the case, you will need to use the custom during installation option.
  Before you attempt to upgrade, please run the Windows 7 upgrade Advisor:
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
  Also, check if your computer is compatible for Windows 7, using the Compatibility Center:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
  To learn more about the upgrade process, please visit the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  I hope that helps!

• Do we need to key in the product key when we upgraded from windows vista to windows 7?

  After upgrade activation key

  Do we need to key in the product key when we upgraded from windows vista to windows 7?

  When you install Windows 7, you must enter a key within 30 days to activate it. If you do not want to enter the key during installation:

  On the page to enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• I've upgraded to Windows 7 and now my laptop mouse scroll button will not work.

  I have upgraded from Windows Vista to Windows 7 on my Fujitsu Lifebook laptop.

  The mouse that is built into my computer is a tablet with a typical right button and left button - and between these 2 buttons are 2 small buttons that can scroll and down the documents and Web sites. Well, since I have upgraded from Vista to 7, this button did not work. Not on Web pages, not on Word documents, not on anything!

  Does anyone know how to fix this?

  Thank you!

  Saturday, September 4, 2010 12:53:55 + 0000, forthewin wrote:
   
  >
  >
  > I have upgraded from Windows Vista to Windows 7 on my Fujitsu Lifebook laptop.
  >
  >
  >
  > The mouse that is built into my computer is a tablet with a typical right button and left button - and between these 2 buttons are 2 small buttons that can scroll and down the documents and Web sites. Well, since I have upgraded from Vista to 7, this button did not work. Not on Web pages, not on Word documents, not on anything!
  >
  >
  >
  > Is - anyone know how to solve this?
   
   
  Check on the Fujitsu website to see if they have a Windows 7 driver
  for your touchpad. If they download and install it. If they are not,
  you're out of luck.
   
  --
  Ken Blake
   

  Ken Blake, Microsoft MVP

• Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

  I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

  OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• On Win 7: I just installed windows 7 and now I can't play properly. They run slowly.

  I just installed windows 7 and now I can't play properly.  They run slowly.  I tried to download the drivers updated my video card without success.  Do you have any suggestions?

  Windows 7 comes with installed DirectX11. In order to run your games, you need to install the package DirectX9 and updates here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  This should make your games run better.

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I changed my Zonealarm firewall Windows Firewall and now I can't access certain websites that I usually visit

  I changed my Zonealarm firewall Windows Firewall and now I can't access certain sites that are kept in my favorites, I used to visit including some Microsoft, MSN and a few others which it (using another PC for that) the sites that I'm trying to access right will keep showing that the connection but I can go to my favorites and connect to others of the opened page. Someone at - it ideas, what could have changed? I'm also using Microsoft Essentials.

  Sorted! ... the problem is my Belkin PCI card was a snap after use some 8 years and I am connected through my wireless alternative D - Link DWL-122 USB adapter and it has been/is somehow stop Adobe Flash to run, so any site, I have tried to connect to Flash content does not open. I tried the Belkin and it let me straight on any site I wanted.

  Hope this helps others as it isn't always down for a team of software.

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.