Error: failed to create or save new files in the folder where it was downloaded during the upgrade from Windows Vista to Windows 7

Similar Questions

• Windows 7 - upgrade Setup error we are unable to create or save new files in the folder in which this application was downloaded

  I just bought the Windows 7 Home Premium upgrade from the downloaded Microsoft store the installation files. I am currently on Windows XP 32-bit, and try to install Windows 7 Home Premium 64-bit.

  Now, whenever I try to run the executable from Windows 7, I get this error message:
  http://i.imgur.com/8C8nM.PNG
  Now, I tried to make the folder I downloaded files is NOT unalterable, but every time I try to do it right, he returns to read-only. I can do all the files Windows 7 installation not in read-only, but the folder remains read-only. I moved the installation files in different locations, only to get the same results.
  Yes, I'm on an administrator account and I still have this problem.

  Hello

  32-bit to 64-bit is not a supported upgrade path. You must do a clean installation of 64-bit.

  In addition, upgrade is not possible from XP to Win7. It will be a custom installation.

  As a first step I suggest you back up the data before you do a custom installation. Check the link for more information.

  http://support.Microsoft.com/kb/320820

  Also check the following links:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
  http://Windows.Microsoft.com/upgrade
  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  I hope this helps.

• Problems with the upgrade from Windows Vista to Windows 7 error

  I try to upgrade Vista Business 32-bit Windows 7 Home Premium, but I get an error at the beginning of the installation message saying "Windows could not retrieve information about the disks on this computer.  After clicking on the close button, its takes me back to the opening screen.   Its a laptop with 3 GB of RAM.  The program compatibility tells that should work, can anyone help?

  Are you trying to upgrade Vista while it is running or are you boot from the Windows 7 DVD? Note: Windows 7 Home Premium requires an installation "Custom"and clean up as there is no path inplace upgrade (see below).»

  Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements
  1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  16 GB of disk space available (32-bit) or 20 GB (64-bit)
  (Note: 16 GB is a strict minimum and unrealistic, suggests at least 32 GB or more)
  Graphical device DirectX 9 with WDDM 1.0 or higher driver

  Windows 7 upgrade paths
  Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

  .

  Windows 7 upgrade paths
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Decrypt Windows 7 upgrades: the official rankings
  http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
  (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

  Which is right for you?
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  List feature that provides each edition of Windows 7:
  http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

  Windows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
  http://www.PAGESTART.com/windows7proupgade.html

  Users of Vista Home Basic, your choice of upgrade is: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
  Users of Vista Home Premium, is your choice of upgrade: Windows 7 Home Premium or Ultimate 7

  Users of Vista Business, your choice of upgrade is: Windows 7 Professional, Ultimate or Enterprise
  

  Users of Vista Enterprise: only one way of upgrading that is: Windows 7 Enterprise
  Vista Ultimate users: once again as a way of upgrading that is: Windows 7 Ultimate.

  J W Stuart: http://www.pagestart.com

• How can I save my files to the computer under Windows XP Home Edition?

  OneCare.Live had instructions on how to back up my files when I use Windows XP Home Edition, and I want to use the backup utility. He talked about having to install the backup utility, but I don't have the instructions. Help, please.

  You will need your operating system CD.

  If you insert it into your CD drive.

  When welcome appears, click on exit.

  Make a right click my computer in the Start Menu and click on open.

  Right-click on the icon for Windows XP Home edition and click on explore.

  Double-click the VALUEADD.

  Double-click MFST.

  Double-click NTBACKUP.

  Double-click NTBACKUP. MSI.

  It automatically installs Backup.

  Click Finish and close all open windows.

  Remove the CD from the BONE of the reader.

  Click Start, all programs, accessories, system, backup tools!

  Have fun!

• Missing music files after the upgrade to Windows 10

  Original title: windows media player

  What happened to all my music files I had Windows 7 when upgraded to windows 10?

  Did you do an upgrade on the spot to W10, or did you do a complete new reinstall?

  Makes you backup data before hand?

  If you did an upgrade in Place your music files should still be there. If you did a clean installation from scratch, they will have been removed.

  If you have made a backup before hand (always recommended) or if you have a recent backup, you should be able to restore that. Also, if all goes well, there will be a folder "windows.old" on your PC, which must contain your old music files in folders that they were originally in. Find the folder "windows .old" and navigate in Explorer windows (not IE) to see if you can find them. If you can COPY them to where you want.

• Getting the error "your computer hardware should be upgraded" during the upgrade from Windows 7 to Windows 8. 1

  Hello

  I recently bought a DVD of Windows 8.1 and when I try to update my Windows 7 to Windows 8.1, I get error "your computer hardware must be upgraded. I have Dell Inspiron N5110 notebook with Windows 7 Home Premium 64 - bit Service Pack 1. The laptop is running on Dell BIOS A09. I did a google search for this error and found that I need to update my BIOS to version, but most of the reviews in said Internet Dell BIOS A11 running 'black screen' after being upgraded to Windows 8 or 8.1. How can I solve this problem to upgrade my laptop for Windows 8.1? Any help is greatly appreciated!
  I thank very you much in advance!
  Thank you
  Srini

  Contact Support latest Tech Dell to see if they have an update of the BIOS.

  http://support.Dell.com/

  Note: Have your number of practical service.

  Also before you upgrade do a backup of Windows 7 Image just in case the issue of the "black screen" is not resolved. The Image will allow you to restore Windows 7.

  EaseUS Todo Backup Home V6.1 http://www.todo-backup.com/
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 6.1 supports XP, Vista, Windows 7, 8 and 8.1

  Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, only pick up is available when booting from a Bootable Acronis media.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/products/TrueImage/#resources
  2014 supports XP, Vista, Windows 7 and Windows 8

  J W Stuart: http://www.pagestart.com

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting?

  When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting? I would like to know what changes, so in the future, I can set my camera to one who will give me the highest quality in a first time, which allows me to make cultures and always preserve the quality.

  Thank you

  Dovid

  Thank you twenty-one... your answer of common sense to me.

  so, in short, can I assume down the chosen quality over compression algorithm?

• Application deployment error (failed to create schema) planning

  Hello
  
  I tried to deploy a planning application and got blocked at the stage of deployment (validation by fine Wen). During deployment, the work was abandoned giving the following error: failed to create Scehma for application. Out of creating applications.
  
  Can anyone suggest what could be the problem here. Appreciate the help.
  
  
  [Sep 8, 2010 14:06:07]: the analysis of the properties of the Application...
  [Sep 8, 2010 14:06:08]: properties of Configuration of Application...
  [Sep 8, 2010 14:06:08]: analysis of Dimensions info...
  [Sep 8, 2010 14:06:08]: bkpln4 for creating Application...
  [Sep 8, 2010 14:06:10]: error failed to create Scehma for application. Out of creating applications.
  StackTrace:
  java.lang.IllegalStateException: failed to create Scehma for application. Out of creating applications.
  at com.hyperion.planning.HspManageApplication.createApp (unknown Source)
  at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML (unknown Source)
  to com.hyperion.planning.appdeploy.HspAppDefinition$ 1.run (unknown Source)
  [Sep 8, 2010 14:06:10]: error an error occurred when creating the application. See the log for more details. Failed to create Scehma for application. Out of creating applications.
  java.lang.IllegalStateException: failed to create Scehma for application. Out of creating applications.
  at com.hyperion.planning.HspManageApplication.createApp (unknown Source)
  at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML (unknown Source)
  to com.hyperion.planning.appdeploy.HspAppDefinition$ 1.run (unknown Source)

  Check if the schema of the oracle user has sufficient privileges to create the tables, she needed, etc. Usually, if DBA Oracle Connect grants and resource it is enough, or more precisely, they need to provide the following privileges have been granted on a tablespace to the schema/user that connects: create table, create index, create sequence, create procedure, create session, alter session.

  See you soon,.
  Jasmine.

• action with the new file with the size of the selection

  Hello

  I try to record an action that takes a copy of the image and creates a new file with the same dimensions. The action record always have the size of the file of the new hardcoded image inside. I tried to put the Preset in the Clipboard, but this is not recorded in the action. It is with the CS3 version.

  How can I create a new file that takes into account the size of the image?

  Thanks for your help,

  Daniel

  You can save the menu 'Image-duplicate"to make a copy of the entire image without registration of the size. If the doc doesn't have only one layer, you can also save the context menu in the layer panel to duplicate the layer to a new document. The size is not saved.

• save multiple files for the web in JPEG max at a resolution of 800%

  I had more than 200 created illustrator files. They all have the same dimensions. I wanted an adobe illustrator script that saves all files for the web in jpeg.

  Export options must be max.resolution of all files should be increased to 800%.

  I think it's the reasoning

  Open a folder with all the files

  loop through each file

  Save for web each in jpeg format to the quality of resolution and up to 800%

  the names of all jpeg files should be the same from these illustrator files (if possible)

  I will be very thankful to you if you could help me

  Best regards,

  Hassan Ali

  As far as I understand your request it is also possible with a simple action in batch mode.

• Can I convert an entire folder at a time or I need to convert and save each file in this folder one at a time and then download on my cloud to see my phone as well?

  Can I convert an entire folder at a time or I need to convert and save each file in this folder one at a time and then download on my cloud to see my phone as well?

  Hi kezleyp1982,

  You can convert files of different format in a folder as PDF by choosing "file > create > create multiple files"

  Once converted to PDF format, you can connect to "http://cloud.acrobat.com/" using your Adobe ID credentials and then download all the files to Document cloud at a time (press Ctrl + A to select).

  

  Hope that helps.

  Kind regards

  Ana Maria

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike