Upgrading processor on the desktop VAIO

Similar Questions

• Upgrading processor on the desktop Compaq Presario Media Center SR2019UK

  as stated above I'm looking to upgrade and I was wondering what was the taken cpu supported by my motherboard A8M2N - LA. On the motherboard

  specifications page

  http://support.HP.com/us-en/document/c00714578

  He mentioned that it supports AMD Athlon 64, Athlon 64 X 2 and Sempron processors. I was wondering if someone could send me a list of the athlon 64 X 2 processors support so I don't end up buying one that does not work...

  I checked the specifications of your computer system, and I see that you can upgrade the processor up to an Athlon 64 X 2 5000. Please contact any of the local stores for the same thing.

  Example:

  AMD Athlon 64 X 2 5000 Brisbane 2.6 GHz, 2 x 512 KB L2 Cache Socket AM2 65W Dual-Core processor - retail

  http://www.Newegg.com/product/product.aspx?item=N82E16819103211 & nm_mc = EMC-IGNEFL123008 & cm_mmc=EMC-IGNEFL123008-_-ProcessorsDesktops-_-LB3C-_-19103211

  Once you buy the processor, please follow the steps in the link given below to replace the processor.
  http://support.HP.com/us-en/document/bph07139

  In addition, if your PC still uses the original PC4200 (533 MHz) DDR2 RAM, I highly recommend to replace

  with more quick PC5300 (667 MHz) DDR2 RAM (1.8 volts).

  Example:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 667 (PC2 5300) memory Fund - retail

  http://www.Newegg.com/product/product.aspx?item=N82E16820145098

• Upgrade processor in the Qosmio F50-108

  Hello

  I would like to replace my CPU P8400 with Q9100.
  Is this possible to do? Is P45 chipset and model of laptop is F50 - 108.

  Thank you

  Hello

  I agree with Akuma
  Upgrading CPU is delicate first laptop disassembly procedure s isn't easy, you will need to remove all possible parts for laptop and it's not easy as with desktop PC s.

  In addition, the BIOS doesn't allow all processors.
  The chipset also has a page on Intel own CPU limitation you can check the specifications of the chipset.

  But why you want to upgrade the processor?
  Aware of the processor is good enough and you won't see a performance gain by using new CPU

• Upgrading processor on the Satellite C665-s5515

  I bought this for my daughter to use at school and hope it was more than enough to do school work and of course it is. But she also made a video for school and casual games. no games processor intensive like Call of Duty but still some that need speed and RAM.

  So I upgraded the Ram with a 2 and a 4 GB to 6 GB total, but I do not read that it is better matched memory chips so should I go to two 4 GB or 2 GB or leave it as what?

  The BIGGEST drawback of this machine is the slow processor - 1.3 GHz AMD E series. Is it possible to upgrade only or Exchange for a faster processor? The S5503 comes with a 2.3 GHz Sandy Bridge Core i3 - 2350M.

  I can only put in my machine?

  In General, the CPU upgrade is not supported. I recommend you increase the RAM to the maximum level and optimize the operating system preinstalled.
  Please note that the C series of notebooks is certainly don t have the best performance, but they are good at the price.

  For best performance, you need for laptop with the best material. Something series P.

• After upgrade to Vista, the desktop Setup does not save, but he returned each time unwanted installation

  My computer (laptop) did an automatic update of Vista. Since the restart, he lost all cookies, and all applications have behaved as if they were never used.  The files are OK. I had to reset the desktop resolution because it came with something too big. But it does not save the installation program, every time that the computer starts again (even after having his sleep), the office returns in a default setting that I don't like.  Why didn't he save properly?  I have to back to the resolution I love every time. The aspect ratio of the sidebar is also evil in this default value. The clock appears as an oval, for example. I must go to the video driver every time, set the desktop resolution seems correct.  In addition, the sidebar doesn't seem to have an option to display seamlessly, but is a big silver margin is too large for my taste.
  My office was working great before the upgrade, now he isn't very good at all.  How can I fix it so it will stay the way I like it?

  Thank you very much for your answer.  I solved this problem.  He has been
  caused by the last windows update. I think that the file was KB2524375. I have
  uninstalled and everything is back to normal. The windows update (which
  says he has been recommended by Microsoft) completely changes the configuration, disable
  Aero, etc. so changes can not be made.
  There is no error message, it was as if he superimposed a very primitive
  version of windows. Of course, I do not recommend this update.
  Anyway, it's fixed and I'm so happy!

  Thank you!
  Rofa1234

• Upgrading processor on the Satellite X 205 s9349

  Hello!

  Can anyone tell me please what I can install in my processor s9349?
  FSB is 800 mhz... Toshiba in the bios update bios v.2.10 ISC supports t 8100, t8300, t9300, t9500 only
  and v2.30 - penryn and merom cpu microcode upgrade... so the question is... can I install processors 800 mhz or only ranked in BIOS?

  THX.

  If these days, ill try to upgrade T7500 in X 9000. (X 200-21 D)

  But to your question, he thinks that you can use any FSB800 merom or mobile penryn, which has 35W TDP. (and bios, version 2.50)

• upgrading processor on the host ESXi5

  I'm about to upgrade the processor on a Dell T100, which has installed on hypervisor ESXi5.  There are also 2 Windows VMs.   I wondered what would happen to the virtual machines, once the host processor is upgraded.   Do I need to remove the vCPUs and also to re-install VMtools or the upgrade would not affect virtual machines?

  You should not need modify the virtual machine settings, unless you have configured the CPU affinity or your new processors have fewer cores required by the virtual machine. However, as the model/type of processor is seen by the virtual machine, the virtual machines Windows may require reactivation.

  André

• Upgrade processor for the Pavilion P6320Y

  Hello

  I want to move my computer to the AMD Phenom ii x 6 1065 t 95w cpu can I do this? His mother is the motherboard The M2N78-(Violet6). The Council is an AM3 with an envelope of tdp 95w so the new processor that fits.

  I upgrade the bios?

  Any information to support the people here would be appreciated...

  Thank you

  Gary

  Just called and told me the 1065T 95W HEXACORE will work in the purple motherboard 6. It takes a 95W CPU.

  No upgrade needed BIOS.

  Thank you

  Gary

• RAM upgrade problem: Flash the BIOS? or upgrade the processor?

  Hi, I jumped in with both feet and now need help to get out me!

  I have a desktop PC HP Pavilion Elite HPE-470uk who becomes a bit slow (processor card here http://ark.intel.com/products/48505/Intel-Core-i3-550-Processor-4M-Cache-3_20-GHz). After you have added a bluray player that I noticed that it's getting a bit slow so thought I would add little RAM.
  

  I bought a few Hyper X8GB of HyperXbeast 1600hhz, slipped in and the PC did nothing but to turn on and off several times. I checked the two sticks and they both do it. I then (plow in front) checked what memory, the processor can handle and discovered "The Intel® Core™ i3 - 5xx / Intel® Core™ i3-21xx processors handle memory DDR3 1066/1333 MHz" by http://www.intel.com/support/processors/corei3/sb/CS-031175.htm

  After a discussion on another forum, that it has been suggested that I have updated the BIOS because it can allow the processor to manage memory 1600 mhz, but I don't know where to start on this or what version to selected download. I'd appreciate any help you can offer on this.

  The other way, that I can see is to update the processor itself. I thought of nothing too fancy just an i5 because it will allow me to run 3d blurays and should allow me to run some apps at the same time. After reading this http://m.wikihow.com/Upgrade-a-Processor it seems too complicated. Is it really just a matter of taking off the fan, declipsant the old processor, nine droping in and then put on some cooling stick stuff?

  Or should I just return the memory and get good memory?

  See you soon

  Atdot.

  Here are the specifications of original factory for your desktop HP Pavilion Elite HPE-470uk and its card mother MS-7613 (Iona-GL8E). Based on these specifications, this model can support up to 16 GB (4 GB x 4 DIMMs) as follows:

  Dual channel memory architecture
  Four DDR3 DIMM sockets (240 pin)
  PC3-10600 (DDR3-1333)
  PC3-8500 (DDR3-1066)
  Memory non - ECC, unbuffered
  Supports up to 16 GB on 64 bit computers

  In addition, this model can support the following Intel processors;

  Maximum frequency of the processor of the heart < = 2.93GHz
  Intel Core i7 - 8xx (Lynnfield core)
  Intel Core i5 - 7xx (Lynnfield core)
  Intel Core i5 - 6xx (Clarkdale core)
  Intel Core i3 - 5xx (Clarkdale core)

  If you do not have to worry about the update of the BIOS, there is no updates available for your computer BIOS. Honestly, I return the incorrect memory and upgrade to a minimum of 8 GB of RAM. Then, if it solves all your problems, you could also upgrade the processor.

  As the computer is nearly 4 years old, you can consider a factory HP restore to return the computer to a facoty as State. In many cases, it returns original full speed of the computer. The reason why this helps, because the BONE is swollen and clogged over time.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Upgrade processor selected in the recommended list of HP does not work

  Have a HP Pavilion P6733W.  We bought an AMD Phenom II X 4 965 Black Edition 3.4 GHz processor, to replace the OEM processor.  However, after installing the new CPU, the PC starts up.  It runs for a few seconds and then stop.  I think the HP web page has led us astray.  The X 4 processor 965 has a 125W TDP and the specification of the mobo is apparently scheduled for the TDP 95W max.  So, even though HP has said that it is a taken upgrade option supported, I think that the TDP is perhaps the reason why it is not initialize.  What is the likely problem?  If not, what else could be?

  Here is a copy - paste of the HP web page for this model desktop computer:

  Processor upgrade information

  The information displayed for your desktop HP Pavilion p6733w and it's N-Alvorix-RS880-formfat (Alvorix) motherboard is correct. It should be read "AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (core Deneb) up to 95 watt TDP. If the CPU that you have installed is estimated at 125 watts, it is not listed as compatible. Also note that "Black Edition" CPU has unlocked clock multiplier and is designed for overclocking. Your computer and his mother do not support overclocking.

  Please consider these 95 watt AMD AM3 processors except CPU "B #

  Please send Bravo

• Upgrade processor for desktop HPE-510F.

  Hello

  I have a system HPE-510F Phenom II, in which I just upgraded the processor of the Phenom II 1055 to 1090 t
  I use Win7 64-bit. Your specification of State that I update using any processor Phenom II online. Now I get an error msg

  Start indicating that 1090 t processor is not correct and that the system will stop in a few seconds. I am able to get the system
  to start by pressing F1/F2 in tandem, once in windows (my computer/properties), it says AMD Phenom II 1090 T. But if I try to
  Restart the system it gives me the same "incorrect cpu, will stop in a few seconds", again I am able to start later, thoght I'd do it.
  as for coreect this problem. Oh yes, once booted system works very well.

  Thank you.

  Here is the specifications of your desktop HP Pavilion Elite HPE-510f and N-Alvorix-RS880-formfat (Alvorix) motherboard. Two specifications, your system is able to use the following processors;

  Max TDP: 95W
  NOTEnly Socket AM3 processors are supported with this motherboard.
  AMD Phenom II X 6 Six-Core (core Thuban) 10xxT
  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (core Deneb)
  AMD Phenom II X 3 Triple-Core (heart Heka) 7xx/7xxe
  AMD Phenom II X 2 5xx (nucleus of Callisto)
  AMD Athlon X 4 6xx/6xxe (undactylopodite)
  AMD Athlon X 3 4xx/4xxe (Rana)
  AMD Athlon X 2 2xx/2xxe (Regor)
  1xx AMD Sempron Single Core (core Sargas)

  Please note that TDP maximum plug is 95 watts, the AMD Phenom II X 6 1090 t. CPU while you installed has a TDP of 125 watts. Please replace the CPU with one that meets the specifications of TDP wattt 95 listed in the documentation. The AMD Phenom II X 6 95 watt processors work in your system.

• Upgrading the processor on the Satellite U200

  I have a PLUA0C U200-PT300E and I would like to upgrade the processor in it. I bought a T7200 processor on eBay since it was the most powerful available for laptops U200/U205 CPU. However, when I installed it, I came across a series of problems. First the fan would run at full speed and the computer would briefly have blue screen after Windows loading and then it could restart. He just kept this again and again. I ran MEMTEST because I wasn't too sure about what the issue was. The computer locked up during the test, and then I was unable to restart it. I replaced the processor with the an original T2300E, then the cimputer starts and ran perfectly.

  Any ideas why this happened? Was the defective CPU? Both the U200 and U205 come with the Intel 945 GM Express chipset and I have the latest Toshiba BIOS for the U200/U205 (v 3.70) so it doesn't seem to be compatibility problems.

  I wonder if it is the CPU that my own past experience if a CPU is not compatible with a chipset then the computer or the other does not start or it will give errors as soon as it publishes. However, this would be POST and would start to load Windows before it crashed.

  I m didn't ask you with all these questions. Why you not a not post here until you have made the decision to upgrade CPU?

  In any case, I think that the answer to your questions, you will find under http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
  Please read carefully what Toshiba guys talking about CPU upgrade.

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• HP laptop - 15-r150sa (ENERG: I want to upgrade the processor and the RAM of my laptop HP)

  I have a requirement for a high quality laptop computer.  I want to at least 16 GB of RAM and Intel i7 processor. Can I improve/replace the newly purchased on my laptop i5 to i7 processor and 6 GB to 16 GB RAM?

  Emergency response please.

  The processor is part of the motherboard. To get a faster processor, it requires the replacement of the whole motherboard.

  Processor Intel Core i7-5500U and 2 GB cards separate graphics 795814-501

  Above is the part number. This part is new and rare and can only be in HP. At this moment, they are not available. I did a complete search on the internet and it does not appear in one of the parts houses so likely you will have to wait a few months for the part joining the supply chain. When it doesn't the price will shock you. As at least $300US, maybe more.

  The RAM is available anywhere. Like this:

  http://www.eBay.co.UK/ITM/2x-8gb-16GB-DDR3L-1600-MHz-RAM-memory-HP-mobile-Workstat-Zbook-17-PC3L-12800S-/191493216820?PT=LH_DefaultDomain_0&hash=item2c95e29a34

  Upgrade memory requires the removal of the motherboard so it would be foolish to do until you are ready to do all the work.

  May I ask why if you need a super-powerful laptop just purchased a kind of average lower of the spectrum? It's always much more expensive try to upgrade a cheap laptop computer than to just buy a high-end establishment at first. It would probably be you will have to return or to sell your laptop and buy a new one with the features you need.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Will be upgraded from Vista to Windows 7 Wipe Off everything that resides on the Desktop (shortcuts, icons, folders, executable objects)?

  I want to upgrade my computer vista to windows 7. I have icons, folders and executable objects on the desktop. The upgrade process will scan them or they will remain there after the upgrade process is complete?

  Thank you

  Arthur

  It depends on which edition of Vista you're updated since then and which edition of Windows 7, you migrate to.  See

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Windows_Upgrade_Matrix