Upgrading RAM for the installation of 64-bit guest OS on 32-bit host OS

Similar Questions

• Upgrading RAM for the name of the model: SVF15212, model number: SVF152C1WW

  Hello

  Recently, I bought a Sony Vaio SVF15212 (SVF152C1WW model number) in India.

  It came with 2 GB of RAM preinstalled DDR3 (DDR3 PC3-12800(800MHz) 1x2Go).

  It has 2 memory slots, you are free to upgrade.

  I was told from Sony's Web site, we can improve up to 8GB RAM.

  I bought the Rams of Strontium and Simmtronics 4 GB DDR3 RAM PC3-12800 but when I installed these Rams in second slot RAM (1x2Go and 1x4Go) the laptop won't turn on. But if the Rams individually 4 GB then the laptop starts normally. So I returned these Rams.

  So what is the best idea that you can give me... I need to remove 2GB DDR3 RAM preinstalled and use one of the other Rams of 4 GB or 8 GB? (i.e. only a bar than a single stick of 8 GB or 4 GB).

  I need more memory RAM that I use many virtual machines. I read somewhere that they installed 8 GB of RAM in the computer laptop sony vaio (not sure of exact model) with 2 GB pre-installed so that they use 10GB of RAM...

  Is this possible? If so I'm happy that I can keep original key of 2 GB and you can buy 8GB new stick so that my RAM memory would be 10 GB. WOW!... even thought is amazing...

  If someone help me (guide me) which is better than I do...?

  Thank you and best regards,

  SRI.

  Thanks... will check and update.

• Upgrading RAM for the Pavilion P6650z

  I had an analysis of the system of crucial.com who said that I have 4 slots for RAM. 2 are empty; 2 have sticks of 2 concerts each - so I currently have 4 gigs. The results of the analyses say that my max is 8 GB. FWIW, there is a Pavilion P6650z, under Windows 7 Home Premium.

  I wonder - then - I buy a single 4 GB stick and insert it into one of these 2 empty slots? Or is there a maximum of 2 GB per slot (in which case, I have to buy 2 sticks of 2 GB each, to the max of 8 GB RAM)?

  I tried to call customer support HP (sic), but I was bounced from one Department to another because this computer is no longer under warranty, and finally when to transfer me to a person as well, I just got cut. So hopefully someone here can help me out.

  
  HP LaserJet p1102w

  Hi paulri

  Max supports 16 GB on 64 bit OS, 4 x 4 GB

• Upgrading RAM for the ancient system XPS R450

  This has probably been asked and answered before, but I'm having a hard time finding all the information I need in one place.

  Through my church, I volunteer teach computer skills and doing my best to upgrade the equipment for people who cannot afford a new system.

  Here's what I'm faced with:

  Dell Dimension XPS R450

  WIN XP Pro version 2002

  IIP/448 MHz

  384 MB OF RAM

  15.7 hard drive NTFS of G

  I want to update their RAM wherever possible, but continue to see conflicting views on how high I can go.

  In addition, according to my research, I conclude this must SDRAM - i.e. cannot use the DDR I have sitting around - and correct me if I'm wrong, but isn't the DIMM form factor required match sticks?  Don't have not cracked the box still - does anyone know how many slots I could watch?

  Bottom line - what is the absolute MAX RAM?

  I know than most - including me - would say trash box and buy something of the modern era.  But they are very poor people who are lucky to have a PC at all, and that's what I have to work with.

  All the tips are greatly appreciated.

  Thank you.

  
  

• Upgrading RAM for the Pavilion N011AX

  I want to improve my 8 GB RAM. With the one that came with the laptop, the total should be 12 GB. (I checked, there are 2 slots for RAM in this laptop)

  My question is, this laptop will accept 4 GB + 8 GB of RAM? Adding RAM is

  Samsung 8 GB DDR3L 1600 PC3L - 12800S 1.35v

  This laptop motherboard is HP 216 (with chipset A55/A60M FCH).

  Thanks in advance.

  You don't mention the name of the full model (Pavilion 15 / Pavilion 14).
  Anyway, the two would support up to 12 GB (8 GB + 4 GB) with the configuration that you mentioned.

  You can go ahead with the purchase.

  I have to mention that adding another 4 GB with the same config would give you the advantage of boost dual-channel.

  Concerning

  Visruth

• Upgrading RAM for the Qosmio F60-111

  Hello

  This is my first thread here

  I intend to improve my ram 6 GB to 8 GB of DDR3 memory
  intalled ram are currently 2 sticks of DDR3 1066 Mhz 4 GB and 2 GB
  I couldn't find a key 4 GB 1066 Mhz on the local market; available only 1333 mhz.

  If I have installed DDR3 1333 mhz 4GB stick with the original 4 GB of DDR3 1066 mhz, my laptop works perfectly?

  Another issue is my laptop motherboard can support frequency 1333 mhz ram?

  my laptop is Qosmio F60-111

  Hello

  The FSB seems to be limited to 1066 Mhz.
  So even if you want to use the faster memory modules (i.e. 1333 Mhz), the speed could be clocked up to 1066 Mhz.

  So, of course, you can use the 1333 Mhz modules.

  It would be also possible to mix modules: 1066 Mhz and 1333 Mhz

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• Utility to do validations/controls pre-required for the installation of R12?

  Hello

  ENV: Oracle Linux 32-bit 5.8, Oracle EBS R12 (12.1)

  Is there a utility of Meta Link that I can run to check if all the prerequisites are met for the installation of Oracle EBS R12 on Oracle Linux 5.8 32-bit?

  What is the name of the utility?

  Best regards

  Hello

  Regarding your checks of preinstallation of the original question, have look at GDR - health check / Validation Engine Guide (Doc ID 250262.1)

  There are sets of different rules for different OS that you can use to check if all the conditions are met before installing

  You can consult the mos note "R12.1.1: Installation of Oracle E-Business Suite and upgrade Lotus Notes version 12 (12.1.1) for Linux x 86 (Doc ID 761564.1)" and install the needed packages from your installation media (most of the packages are available on the installation media, oracle has provided a separate link for those not available)

  If yum does not properly check out this (you are on 32 I doubt there is one for 32-bit)

  Index of/repo/EnterpriseLinux/EL5/addons/x86_64 /.

  Concerning

  SANAE

• Upgrading RAM on the Qosmio X 505

  I don't know what's going on but I have a Toshiba Qosmio x 505 I'm a little confused on the amount of RAM my PC and it's his lwo I would buy more, I bought mine from Newegg almost a year with the backlit keyboard, to my knowledge, I thought that my computer has 6 GB of ram and it runs games big but the other day while running dxdiag I was shocked to see that I have 4 GB of ram... (4096MB to be exact, it is more than 4 GB, but if it's 6GB so where is the other 1.9 GB of RAM at?)

  Recently, I did a reinstall of windows and wipe the entire computer, it would affect my bios for ram at all? I swear I had 6 GB of ram, but maybe I was wrong, in any case if it is after that that someone provide me a link to buy the 8 GB of ram for the qosmio? Thank you! I'd love to update the full agreement.

  Hi mate

  The value of the RAM can be checked in the BIOS!
  Please check in the BIOS what RAM is recognized.

  In addition, the graphics card shares a part of main RAM in order to get better performance all in game.
  The main value of RAM is the part that would be shared by the graphics chip is high.

  So if the laptop was equipped with 6 GB of RAM (hmm, in that case it should be a 4GB and 2 GB RAM module installed) then some of this RAM could be used by GPU.

  By the way; 4 GB of RAM or 6 GB of RAM are more than enough to get good performance... so in my opinion RAM upgrade is not necessary

• conflicts for the installation of two labview applications

  Hello

  I have two applications LabVIEW 8.6 and can make the executable, then the installation for each of these files in the Project Explorer.

  After that I installed the FIRST application and when I want to install a SECOND, during the installation process, it indicates a newer version is currently installed even though I select a different installation path. The button "Next" is disabled, as shown in the attached screenshot.

  On the other hand, if I install the SECOND application first and then install the FIRST application, even if the installation paths are different, it installs the first application successfully but removes the second request.

  I don't know how to install both applications, one after another, regardless of the order. I appreciate any help or comment.

  See you soon,.

  Ali

  Make sure that both versions have a different code level.

  (Builder installer... Version information... Code upgrade. Simply press "generate" to create a new one for the installation program that is not working)

  See also this help page

  (If both have the same upgrade code, windows thinks that they are the same program and keeps only the higher version)

  (This image comes from 2015, do not know if it has the same appearance in 8.6)

  

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Want to upgrade ram for my Lenovo ThinkPad T61 6463 - B45

  Hello

  I want to upgrad ram for my Lenovo ThinkPad T61 6463 - B45 actually 4 GB (2 x 2 GB) instead of 8 GB (2 x 4 GB). I found some in my next computer store 4096 MB-DATA Value SO - DDR2 800 MHz. But I don't know if the PC2-6400 (800 MHz) would work in my notebook.

  Can someone confirm if these would work? Issue in this page , I found the following information:

  Yavuz, welcome to the forum,

  Looking at the specs you should be good to go, but have not personally tested, I can't be 100% sure.

  What really works, as I installed it in my T61p is Corsair VS4GSDS800D2 G.

• Minimum requirements for the installation of 12 c OEM in VMware

  All,
  
  I intend to install OEM 12 c grid in my computer personal laptop vmware workstation for aim practice.
  
  Can someone list me the minimum requirements for the installation of 12 c OEM i.e. RAM minimum size required, swap space, disk space etc...
  
  Thanks in advance,
  Florine

  Manon says:
  All,

  I intend to install OEM 12 c grid in my computer personal laptop vmware workstation for aim practice.

  Can someone list me the minimum requirements for the installation of 12 c OEM i.e. RAM minimum size required, swap space, disk space etc...

  It took a minute on Google to get this,
  http://www.Oracle.com/technetwork/OEM/framework-infra/em12c-sizing-1590739.PDF

  Aman...

• How and where can I buy a CD for the installation of 3.6.6?

  I have dial-up Internet. After downloading 3.6.6 I can't open because of "file is corrupt". How and where can I buy a CD for the installation of 3.6.6?

  Operating system

  Microsoft Windows XP

  You can not. This problem may be caused by anti-virus software. Try to disable it while you install Firefox. Don't forget to reactivate!