Upload an image using BIS connection did not work

Similar Questions

• Catastrophic loss. Had no Win8 reinstall to use Win7. Did not work well. Help?

  I have a laptop of Win8. Install a free antivirus from AT & T that my machine in brick. I didn't have a backup copy - Yes, I know I should have - but I have Win7 and used that. It work well. I thought I could just go to Win10. It does no good either. Someone at - it a cheap Win8 I can buy? Or knows how to fix the double image win10 gives me? I can't read anything on the screen well enough to use the system restore. In addition, it does not access the boot menu.

  I appreciate your help.

  Just before using the Acer recovery media, you should load the default values of the BIOS then save/quit and use diskpart to wipe your HARD drive clean.

  It would be like this:

  1. load the BIOS default and save/quit

  2. start your Acer recovery media. Navigate the menu to "command prompt".  Use 'diskpart' own to wipe your HARD drive

  3. shut down your computer

  4 turn on your computer and use the Acer restore media

• CAN´t update - the downloadserver connection did not work

  I bought the Photoshop bundle a lightroom. The first month no problem, but now I can´t update.

  Look at the screenshot

  

  Connection failed - it stops always at 2%.

  HI Jörg,

  Please check the help below document:

  Update connection creative cloud

  Kind regards

  Sheena

• Restore windows files when the connection does not work

  After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

  In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

  Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

  Another user on the system do not have the problem.  How can this be corrected?

  Concerning

  Ray

  Raymond,

  What is the version of Windows installed on the computer?

  I wish that you perform a scan of System File Checker-

  https://support.Microsoft.com/kb/929833/en-us

  If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

  Refer to this article-

  http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

  Thank you.

• I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost and then c

  I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?

  Hi Martin,

  In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.

  Please visit the following link: a list of cameras that can be attached to Lightroom.

  Kind regards

  Tanuj

• Access code did not work, now iphone 6s is off the display to connect to itunes

  Access code did not work, now iphone 6s is disable showing connect it with itunes, futher when I connect with I phone I started to update and there is the mode of recovery after 15 min do not know what to do

  Restore is the only option here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

  Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

• An image that I license did not download correctly, how do I go back and download again? Also where can I see my PIC I have a license downloaded online?

  An image that I license did not download correctly, how do I go back and download again? Also where can I see my PIC I have a license downloaded online?

  Hi John,.

  Try this:

  1. go to http://stock.adobe.com

  "2 Select" ""license history " in the drop-down menu directly under your username at the top right of the page.

  3. click on the ID of the desired image in the list that appears for the detail of the image.

  4. choose 'save to office' (or 'Save to CC Library') [re-] download the full high resolution image.

  Hope that helps!

• I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

  I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

  You must click on the Option where it says 'Black' and then you will be able to select soften the skin.

• I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move tab (android) the pdf file open but sound did not work. what I have to do to make it work

  I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move to tab (android) the pdf file open but sound did not work. what I have to do to make it work

  Adobe Acrobat for Android or iOS software currently play any sound or video.

  -Dov

• I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  If you do not need acrobat 8 pro or something another link below, you will need to explain.
  

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• Satellite A200 - restore factory setting did not work

  Tried to restore my Satellite A200 to 'out of the box settings', but it did not work.

  It comes up with the message to put in the windows installation disc, so I put in the recovery disc, but nothing is happening outside the laptop suddenly turn off!

  Its windows vista.
  Any ideas anyone? x

  > It comes up with the message to put in the windows installation disc.
  Description of your problem is a little confusing.
  When you want to install the recovery using recovery DVD image, you must boot from this DVD and not wait for some message that tells you to insert the recovery disk.

  Follow these steps:
  # Turn on your laptop, press F12 to get into the boot menu
  # When the start menu is displayed on the screen put the recovery DVD in the optical disc drive
  # In the start menu, choose the CD/DVD drive and press ENTER. This will force ODD to run as first boot device.
  # Follow the menu on the screen.

  When you see option for recovery just language confirm with NEXT and continue the installation of recovery.

• Re: 8 GB Ram did NOT work in the Qosmio X 300 - 14 p

  Hello

  I wanted to spend my Qosmio X 300 - 14 p of Ram of 4 GB (2 x 2 GB) up to 8 GB (2 x 4 GB).

  I ordered a fitting 8 GB (2 x 4 GB) the value of Atelco, where this set of 8 GB costs 155,-Euro
  (while in the shops in thoshiba 4 GB is more than 300, - means 8 GB more than 600,-, ridiculous). :

  I ordered this one:
  8 GB - Kit Corsair ValueSelect SO-DIMM PC3 - 8500S CL7

  This was exactly the necessary RAM, 2 x 2 GB, still are the same.

  PROBLEM:
  the x 300 wouldn't start when 8 GB of ram are connected
  (same tzhen does not start, screen stays black and nothing happens (you don't hear departure of fans and hard drives etc.)).

  the merchant first thought, the qosmio is reserved to the maximum of 4 GB completely, but I was able to convince him that this is not true.
  then he assumed "branding" (only some modules work).

  but it was also not true, because the two modules to 4 GB worked when connected only.
  the two modules worked in places, housing upper and lower.

  even weirder: I could plugin 1 x 4 GB and 1 x 2 GB and it would start perfectly and appear 6 GB (6144 MB).
  He has also worked in any combination (any module in any location).

  My bios is 2.10, the latest toshiba provides.

  the dealer said the corsair modules are good modules that work everywhere else, and as we have seen, only two of them worked (and in the combination of 6 GB: 1 x 4 GB + 1 x 2 GB).

  the question now is: WHY it did not work with 8 GB (2 x 4 GB).
  ================================================

  every time we tried, screen remained black and nothing happened, qosmio was dead.

  We also have not found any bios setting, as the manual does not say something like that.

  someone has an idea what is the reason and
  what I could do to get 8 GB to work in X 300 - 14 p (PQ32E...)?

  both modules where the good, the two worked alone in any accommodation, only two 4 GB modules would not work either.

  BTW., it was packed like a 8 GB SET (in modules of 2 x 4 GB), they had the same series and were made to work together.

  Finally, we were out of ideas.

  is this a known issue?
  is there a tweak or workaround?

  I want my 8 GB, what can I do to make it work?

  everyone there uses the x 300 - 14 p with 8 GB (or even another 300 x)?

  help appreciated.

  Thank you

  q3u

  It is not just to write this review in your last posting. You should be happy that Akuma has spent his time chatting with you and try to offer an own opinion.

  If you want the real answer contact Toshiba service and clarify this point with the professionals. If you n t as offered here answers, maybe you'll like have professional opinion and exact explanation, what can be the problem.

  Is that each RAM module will not work with every model laptop and there is a problem of cheap product and problem is compatibility.
  Many people have reported that in the past, report you it now and I do not know in the future, we will have several similar messages here.

  So, what's your problem now?
  You want to have good workbook or you are focused on saving your money?

  I checked the specification for the Qosmio x 300 - 14 p and you can confirm that you can improve up to 8 GB. Toshiba recommends using 4 GB modules compatible with the PA3377U-1M4G part number. This module has been tested and it will work. You can also buy the Kingston high quality module. It also works.

  To be honest, I never heard of Corsair. I only use Kingston.

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed