Urgent: How to export a Director cast members - in this case it's a flash animation?

Similar Questions

• How to install just PrP (or Prelude in this case) CS6 DVD?

  Lets say, I want to install JUST an app (PrP or Prelude in this case) my DVD CS6. I installed only the stuff that I needed at the time. How can I do this?

  Choose custom Setup on the DVD startup screen and uncheck anything that you don't want.

  Do not forget that the products within a collection of CS6 can be installed as produced scattered on different machines: even if you use only the portion of the collection, it still consumes one of your collection license seats.

• How to remove lines of 2D array in this case...

  Hello. I'm just begging adventure with labview so please patient. I created a whitch program assumes that the work following the path:

  2D entry table is table created by FOLDER NAVIGATION Subvi. It works this way, browse by folder and looking for txt files which contanins measurment data. In my case Subvi based 4 files and their headers read information on what types of data are in file also their the path. 2D Array Input is created in this way. Subvi named TRACES OF PATHS TABLE make photo with polar/XY trace. Is to only create these plots and legends about a picture as many files (their paths) is installed to the program by the output array. I did this Subvi this way and I wouldn't change it.

  My problem is that in the same loop program (witch check any changes by the user) supposed to relay anly these rows (files) for that checkbox is marked, for example marking anly 1 and 4 box, the program should choose between the row of table 1 and 4 only input and passes the results matrix, then the Subvi pathnames TABLE PLOTS makes an image only with 1 to 4 of plot and legend only for the parcel 1 and 4. The best solution would be that a witch relay is avtivated by logic signal. He lost to me ideas how to fix it, I'm just around the corner from blaind...

  I tried using delete in the table, but I don't know how to use it properly in this program, becease it can be only before or after for loop. This is the scan of the front panel and main problem. Please settle down somehow to solve this problem.

  Concerning

  I have attached a vi. Is this the one you need?

• How to rename the Cast in Director (no cast members)

  How to rename Cast to the Director (no cast members)?

  It seems that Cast in Director cast members, no, can't be rename.

  If the name of a new external distribution is decided, it cannot be changed?

  Please help me out. Thank you!!

  perhaps only deal with it via Lingo?

  Hello

  You can click the Castlib in the cast window, and then in the property inspector, in the Cast tab, you can change the name. Internal castlibs, this will be an easy way to change the name of font.  For external casts, if you want the file name, click the Castlib, choose Save as and save it under a new name. Then click on save and Compact. The film will now linked to the newly named external distribution. You can rename the file ouside Director. When you open the DIR, you will be asked a replacement cast for the original file. You can then select the newly named file.

  Dean

  Director Professor / Consultant / passionate Director
  http://www.deansdirectortutorials.com/
  http://www.multimediacreative.com.au

• How to export dimensions members of planning to a flat wire

  Hello
  
  Any body please let me know... How to export a specific dimension members (E.g. Entity) of the planning in a flat file.
  
  Thanks in advance,
  
  
  Kind regards
  Randy

  Hi Thr,

  You can try one of the below one:
  (1) use excel add and drill to the bottom of the hierarchy of entities
  (2) planning and essbase have the same hierarchy, why not use an extractor of contour in the essbase
  (3) Sql query on the realtion to correct hierarchy table
  (4) ODI
  (5) the file EPMA generator from a planning application can be used to take directly extract EPMA (if you EPMA)

  See you soon...!

• How to export a project in AS3 Flex3?

  Hello
  I read somewhere that I can export any flex in AS3 project to change certain default values for components.
  Anyone know how to export?
  Thank you
  She

  In case you have problems with this, this is the command line in FB3 from a simple project, I have for the test:

  -keep-generated-actionscript = true - local en_US

• Export of PNG files cast members

  Hello

  I have a file .dir with a few cast members that must be managed.

  Unfortunately, I don't have the original images so I need to export to PNG and then re-import hide them from the Director.

  OS X 10.8.3

  Director 12.0

  Thank you!

  Hello

  You don't need to export.

  All you need is an image editor installed on this computer.

  To change any member of the image go up:

  -Click Edit / Preferences / publishers...

  -Select the BMP, JPEG, GIF, PNG, etc. image formats, click on change and set the path to the image editor.

  After double-clicking on the cast member, change the image and record (overwrite) the result.

  Good luck.

• How to export directories TMS?

  Hi all

  TMS 14.3.2

  Another type of TMS database issue. If anyone knows how to export directories TMS in a text file?

  I'm after getting this information in another application, but not all systems we have are directly recorded in TMS. We have several sources of the telephone directory of VCS, which means, we are able to create lookup for system registered in the VCS but not necessarily managed in TMS.

  I could export the MSD systems with relevant data (for example, IP address, E.164 number, etc) to an Excel file, but that will not cover all the available system in the directories.

  See you soon,.

  Chris

  Thanks for the clarification, your original post I've read it was you were trying export data from the phone book of unmanaged by TMS systems that were on your VCS.

  Data export of VCS in an Excel via a phonebook Source file based on file would not work?  It would provide all the endpoint names and relevant link info if it is present as a H323/IP/SIP.  How to export directories in an Excel file located in the TMS administration Guide, page 204.

• Export of lists to text cast members

  Yes, exactly what the title suggests. How to export a list´s completely contained in a text cast member?

  Thanks dude = D

  Sorry for the wrong answer as the answer of marking, maybe a mod could fix this?

• How to get the Director bitmap files to become transparent PNG?

  I'm new to the whole thing from adobe, and I have files I want to convert bitmap files in a CSE in images with transparency. Thanks for the help!

  Found: Re: how to export several members of the cast at a time?

• Are there script manager code resp. beyond the "cast members"?

  Hello

  Currently, I am working on a big project little documented in the jargon of the Director / without having built myself. So, I am facing a lot of issues and problems.

  (I work with the German edition, so maybe that some of my Director translated English terms are not correct.)

  This time I am facing a very strange behavior of the application. There is a parent script named "PersonalZelle" (personal cell) that has a function named "switchCameraCB". I have not found any call of this function by text search in other scripts. I've tried choosing to search "all members of the distribution" (German: "Alle Besetzungen"). But placing a breakpoint there and debugging, this function is actually used in the currently running application! How can O.o this be?

  So my questions are:

  (1) are there any 'hidden' scripts/code beyond the cast members? If so, how can I find them?

  (2) otherwise, how is it possible to have a function/method used if no code is actually not called it?

  Second example:

  In another script, there is a variable named piVideoNum. This variable is NOT instantiated, and no value it is given in any of the code. But he debugging, there always the correct value that it should have. How can this be? O.o where it takes the value of? As much as I know there is no interface user-part with this fixed variable. In the user interface, you have three videos which you can klick, and if klicked, the correct number of video is recorded in piVideoNum. But in the script attached behavior, there is nothing. The method that handles the klick calls another method and sends the piVideoNum - without having changed before. Perhaps it is also done by some code/script 'hidden '?

  Does anyone have an idea? That would be very helpful!

  I need to change this method, but if I don't know how it works, there is no possibility...

  Well, not exactly.  The beauty of 'ownership' is that each sprite that uses this behavior has it's own, unique value for this property - that is not as a global variable.  So, whenever you click on one of the videos, it will use its own value for this property.  It seems that in your case, they never change, so one of the videos always has a piVideoNum property whose value is set to 1, and another video is configured to use the number 2.  You get the idea.

  They are essentially of three different variables, and you can see it by going to the frame and then typing in the message window:

  put .piVideoNum sprite (1)

  put .piVideoNum sprite (2)

  put .piVideoNum sprite (3)

  (except, of course, use correct sprite numbers), and you will see 3 different values.

• How to export to several locations

  Hello world
  
  I'm doing an export of complete database on a server of SunOS 5.8. The problem, I do often face is, most of the files on this server systems are filled with 50 to 70%. So I am not able to use a single file system to store all my files to dump. So what I've done, I've created several directories dump each representing a file system on that server. Later, while making exports I specified the name of directory dump the prefix for the dump as file names below.
  
  expdp name of user and password
  Full = y
  dumpfile = oradata1:dumpfile1.dmp, oradata2:dumpfile2, oradata3:dumpfile3
  file size = 5GB
  logfile = oralog.log
  
  This has worked well for me. But I faced some problems that I will list below.
  
  1 > as stated above, I used the file size setting. At one point, he said space required was not available (hopefully, the error number is 39095) and the export was not. Then after the increased filesize parameter considerably solve the problem. I'm still not clear why the export has not even if there is enough space in the file system. I increased the size of the parameter file after reading one of the post in an oracle forum. But they do not mention how it works. I want to know how oracle determines the minimum size of a dump file that was causing this problem.
  
  2 > I thought to create a shell script to automate this backup process. I used export even with some new additions, as shown below.
  
  expdp name of user and password
  Full = y
  dumpfile=oradata1:file%U.dmp, oradata2:file%U.dmp, oradata3:file%U.dmp
  file size = 5GB
  parallel = 5
  logfile = oralog.log
  
  My idea was that if I specify %U, oracle generates automatically new file names when the current had exhausted. Yet here, the problem I encountered was that it created a single dump file in each directory. Later, I found that the number of generated files depends on the value specified for the parallel parameter. But once the export is complete, even if I've specified 5 for parallel parameter, that he created two dump files in the dump first directory, each in the remaining two dump directories. Still, I don't know why this happened. I found not yet no answer for this.
  
  Please help me to solve these questions, I tried my best, but I am not able to find any help for my oracle related research. The only thing I see in google's documentation of oracle data pump, please suggest me some useful sites, forums for oracle that will help me. I rely on this forum much and it has really helped me a lot, thank you for all the gurus of the Oracle.

  I would try to explain what is happening probably.

  I'm doing an export of complete database on a server of SunOS 5.8. The problem, I do often face is, most of the files on this server systems are filled with 50 to 70%. So > I am not able to use a single file system to store all my files to dump. So what I've done, I've created several directories dump each representing a separate file > system on this server. Later, while making exports I specified the name of directory dump the prefix for the dump as file names below.

  expdp name of user and password
  Full = y
  dumpfile = oradata1:dumpfile1.dmp, oradata2:dumpfile2, oradata3:dumpfile3
  file size = 5GB
  logfile = oralog.log

  This has worked well for me. But I faced some problems that I will list below.

  1 > as mentioned above, I used the file size setting. At one point, he said space required was not available (hopefully, the error number is 39095) > and the export was not. Then after the increased filesize parameter considerably solve the problem. I'm still not clear why the export does not even > if there is enough space in the file system. I increased the size of the parameter file after reading one of the post in an oracle forum. But they do not have > mention how it works. I want to know how oracle determines the minimum size of a dump file that was causing this problem.

  My guess is that Data Pump started on 1 file system and filled the file to size 5 GB max. Then, he tried to create the following file in the following file system and could fill it to 5 GB if it does not.

  When you specify multiple files, Data Pump starts on the first file, and then when it is full, it opens the next file. (That is if at the same time is 1) If the parallel is greater, then it will open several files.

  When you bumped the size max, the first file took maybe 10G and is the second file was not required, or the amount of space for the second file was small enough to fit on the second file system.

  >

  2 > I thought to create a shell script to automate this backup process. I used export even with some new additions, as shown below.

  expdp name of user and password
  Full = y

  
  dumpfile=oradata1:file%U.dmp, oradata2:file%U.dmp, oradata3:file%U.dmp
  file size = 5GB
  parallel = 5
  logfile = oralog.log

  What happens here is that the first file will be opned on oradata1:file01.dmp the following file will be oradata2:file01.dmp, then oradata3:file01.dmp, then back to the first directory with file02.dmp etc. He round-robins the filespecs and as they live in different directories, so it will be alternate directories also.

  >

  My idea was that if I specify %U, oracle generates automatically new file names when the current had exhausted.

  It's true, but if the directory structure is filled, an error is returned.

  Yet here, the problem I encountered was that it created a single dump file in each directory.

  It would have created more files in the directories if needed more work. It fills a file and then creates the next, but in an order of Robin

  Later, I found that the number of generated files depends on the value specified for the parallel > parameter. But once the export is complete, even > I've specified for parallel parameter 5, it has created two dump files in the first dump directory > each in the remaining two dump directories. > Again, I don't know why this happened. I found not yet no answer for this.

  The work probably only went to a parallel 4 so he created 4 files. It does not create a file until he needs one.

  >

  Please help me to solve these questions, I tried my best, but I am not able to find any help for my oracle related research. The only thing I see in google is > data oracle documentation of the pump, please suggest me some useful sites, forums for oracle that will help me. I rely on this forum much and he really > helped me a lot, thank you for all the gurus of the Oracle.

  I don't know what problem you have. If you have limited disk space and you say the Data Pump task to write dumpfile that is, it will be. If there is a lack of room, the Data Pump task will throw a fatal error. During export, Data Pump doesn't know how he'll need disk space. The estimate is just for the data, it does not consider the metadata. This may be larger than the data, or it could be smaller. It depends on how full your tables are.

  Hope this helps

  Dean

• How to export the list of devices in the Profile Manager?

  Hello

  is there a way to export the list of devices in the Profile Manager on a mini mac running OS Server 5.3?

  Thank you

  How to export data from device in the Profile Manager

  How to export a list of devices and their info?

• How to export and view iBooks

  How to export PDFs from my iPhone iBooks app to my iMac and view them and then add the other pdf for the iPhone?  Or how to save the iCloud iBooks.

  He should be synchronized with iCloud. You shouldn't do anything.

• How to export MusicXML... or Audio files as

  Hi all

  How to export MusicXML... or as Audio files. They are not gray. What should I do to make tham to be visible?

  Thank you!

  Master - Mac Mini 2.3 Ghz Intel Core i5, 8 GB, HD on Toshiba 500 GB, Mac OS X 10.10.5 system.

  Logic PRO X (10.2), RME FIREFACE UFX,.

  ———

  Slave - MacBook Pro 2.2 GHz Intel Core i7, 16 GB, Systen on Intel SSD 180 GB, Mac OS X 10.10.5.

  Sound library on 1 TB SSD, Pro 2, FIVE 5 Pro, VS, MIR PRO VI,

  For music XML - the partition must have the focus and be selected, then it is not gray.

  For others, the first word gives a clue (regions - you select the audio regions - you can select the audio tracks, etc...)