URGENT! -Installation problem - migration of Windows XP from my laptop - can't go beyond, connect!

Similar Questions

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Installation problem w / 10 Windows on end 2015 27 "iMac retina

  I used boot camp and it installs windows 8.1 very well. When install updated to 10 from inside windows 8.1 windows or try a cleanup of 10 windows using boot camp, he gets at some point and I see a black screen and it does not go any further. Why Windows 8.1 installs fine, but not windows 10? I have the model with the hard disk of 1 TB in it.

  I have the same model as you, and I just spend the whole day trying to solve that, more than an hour on the phone with Apple support. Here's what I learned.

  Apple support agreed with me that the problem is most likely a bad display driver (AMD?) in the last set of drivers for Boot Camp. Unfortunately, Windows 10 compatibility for the end iMac to 2015 has been added only last month, so there would still be easily bugs in drivers. The result is that Windows is unable to turn on the display when the Boot Camp drivers are running, but cannot when the default system drivers are running. That's why we could still install Windows and boot to the desktop at the very first (until Boot Camp installed drivers).

  Support has also suggested that the new update of El Capitan 10.11.2 could contribute to the bug, but he was not sure about it.

  From my experience, the following will not solve the problem:

  • Reset the PRAM
  • Reinstalling Windows (bad drivers should I not get removed)
  • Using the Windows system restore
  • Install Parallels (you cannot yet touch the drivers)

  The only remaining thay of possible solutions have been discussed on the phone are:

  • Enter Windows 10 safe mode (very difficult, unless you hard reboot and reset the PRAM repeatedly) and uninstall the graphics card drivers or install the latest AMD drivers
  • Remove your Windows partition reinstall from scratch and refuse installing Boot Camp drivers when it comes to the top

  If you try one of these solutions, please let us know if it works.

  And if someone could tell me please how to guarantee to be able to boot in SafeMode Windows 10, it would be greatly appreciated. For the record, F8 and SHIFT + F8 are very likely to work.

• Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk

  Hi all

  I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.

  As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.

  Thank you.

  Hello

  This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/

  As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.

  Replace broken laptop optical drives is not too difficult, you can see this as another option.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Former installation problem program under Windows 7 64-bit

  I installed the 64-bit Windows 7, but I need to run some old software, for which I have a CD. (Actually I think it is 16-bit. Well, I know it's a dinosaur, but this is my situation.) Naturally, setup.exe is also 16-bit (perhaps 32 bits, but I doubt it). There is a shortcut to setup.exe on my desk, by double-clicking on it, I get this message:

  The version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.

  He ran very well under Windows XP 32-bit, and I don't remember doing something special for 16 bit then; I know that much. (I'm sure I'd remember something special like that, if I had). Microsoft program compatibility issues resolution isn't going anywhere.

  How do I enter a 32-bit emulator environment and double-click the shortcut (or setup.exe itself) from there?

  Separated from the:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/64-bit-and-32-bit/c2d75382-DB03-4674-B62D-9ca8a0331b34

  64 bit W7 run 16-bit programs.

  32-bit W7 can run older 16-bit programs (a little) more

  See http://windows.microsoft.com/en-us/windows/32-bit-and-64-bit-windows#1TC=windows-7 and http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/how-can-i-run-16-bit-programs-in-windows-7-64-bit/22b921f5-0b71-4ba1-8567-2bb86a1b604e for additional information.

  If you have an eligible version of W7, you may be able to get the program running in XPMode or install Virtual Box and if you run an old copy of XP or W7 32-bit (assuming it's free with a free license, etc.) in that.

  Or maybe make a system dual-boot W732 (or XP) and W764.

  If it is a DOS program rather than an old Windows program, it can run into something like DOSBOX

• Could not start the Services "Apple Moble device" in windows (Window 7) from my laptop

  I am unable to start the Services of "Apple Moble device" in windows (using windows 7) to my laptop in order to use iTunes software to work with my iPad.

  Every time when I tried to work with my iPad with the installed iTunes, which prompted because of the Services 'Apple Moble Device"not started, so cannot use the iPad with iTunes. I tried several times to launch the "device Moble Apple' Services manually in the Control Panel, but everytimefailed.

  No matter, I reboot the machine, or remove the iTune and installed it again, it has always failed.

  However, my iPad works fine with other computers, so it should not be the problem of the iPad. What will be the problem with my Windows 7 on my desktop? Will there be other software or services in my laptop had to start or stop me from starting Services "Apple Mobile Device"?

  Hello

  Method 1:  Check that the Apple Mobile Device Service is installed and works using the software component Services MMC snap-in of components:

  (a) on the start menu, click search.

  (b) type services.msc, and then click OK. You will see a list of services.

  (c) view the list alphabetically and make sure "Apple Mobile Device Service" status is "started".

  (d) if the State does not indicate that the service is started, right-click Apple Mobile Device Service and choose Start from the context menu.

  (e) if the service is installed and started, right-click the service and select Restart from the context menu.

  Method 2: If the steps above did not help follow the steps described in the following link and check if that helps.

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1567

• Installation of OEL with windows 7 OS on laptop

  Hello
  I need a unix/linux environment to install PeopleSoft. So I intend to install OEL in my laptop.
  
  Please help in the installation of OEL OS in my laptop. Also I don't want to distrub the existing OS of Windows 7 in my laptop.
  
  I have 6 GB of RAM and 500 GB (windows) of free space in my laptop.
  
  Thank you
  Jean-Marc

  None of your current installation is put to. just install VMWare Server (it's free) as any other software, and then starting in VMWare, create a virtual machine (this is on top of your current OS) install OEL.
  You will find many tutorials all over the web, I wrote an article some time ago (it was OEL4.6 - but the principle is the same with the superior version of OEL):
  http://Gasparotto.blogspot.com/2007/12/on-PeopleSoft-road-OEL-46.html

  Nicolas.

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• Is there is problem switch to windows 7 from Xp?

  I have an ibm thinkcentre machine designed for xp, can I go whap problems I might encounter?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum:http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  See also http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-xp-to-windows-7 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• full 6500 E709N wireless installation problem install on windows 8 preview version

  certain someone can tell me. I have a 6500 E709N wireless printer. I downloaded the new windows 8 full install driver software from HP website. everything goes well with the installation until it arrives at the final stage of the configuration of the software. then it saids error fatal. I am running windows 8 preview version. I disabled the antivirus. the firewall is turned on. does anyone have any ideas?

  FINSFANLH43, just to let you know, Windows 8 and Windows 8 Preview of consumption are two different operating systems. Some software that is configured for Win8 will never work in the 'test' environment, it's the preview.

  Unfortunately, the preview is not fully active operating system and is not fully supported by our printers. The operating system can sometimes install OS for printer drivers after be directly plugged into a USB port and go through the process of automatic detection of computers. Even with that, you would be limited only to be able to print.

  I installed Win8 Preview on my netbook to learn the operating system, but quickly discovered the limitations of the preview and was to return to my operating system previous to use all my programs and devices.

  Your best option is to be return back as I did for a previous operating system or buy the Win8 complete software if you like how your computer works now. I have worked with Win8 during these last weeks, and it's a good operating system.

  I hope this helps!

• Migration to windows 7 from windows XP does not

  I am facing problem of activation of windows 7. Our company with the volume activation license key. but windows are not activated right system had no eligible operating system. Orginal win XP was loaded with the system.

  Please let us know solution.

  Contact the Center Activation of Volume. Windows XP must be a product qualifying for volume license upgrades, even Windows 2000 Professional is a product.

  How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• installation problem: I have windows 7, but the installation program detects vista

  I bought lightroom 6. I have run the install, but when it comes to verification of my computer, it detects vista. I have windows 7. I can't go further and install my product.

  Can someone help me solve this problem?

  Hello

  a quick search brought up this thread with the same problem: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Best regards
  Maurice

• Pavilion 15 ab210tx: problem with drivers windows 7 with 15 laptop ab210tx.

  I bought the new laptop HP Clubhouse 15 ab210tx. I installed Windows 7 ultimate 64 bit os but all drivers are missing, I am not able to connect to internet and USB diveces.

  I am developer of Hadoope, so most don't soupports Windows8 and higher version software and JAVA.

  Please help me solve this problem.

  Thank you

  Sairam

  You are the very welcome, Sandoz.

  See if drivers ethernet and usb directly from the manufacturer of component Web sites work for you.

  Ethernet: 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  USB3: Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• Netflix cannot show films due to server or proxy server problems when using Windows Media Center. How can I solve this?

  I can access Netflix without a problem, but when I select a movie to watch and click on play, a window opens stating could not display the page, the server is not responding or is something wrong with the proxy server.  Try again later or contact your administrator for assistance.  I closed the program and all over again and still get the same message.  How can I solve this problem?

  Hello

  1. What is the exact error message?

  2. are you on a computer in the domain? If not, is that your ISP requires a Proxy Server client?

  If so, you should contact your ISP for Support of parameters appropriate Proxy Server client.

  If you are on a domain, you must check with the person supported on the local network to the appropriate client Proxy Server settings.

• How can I remove Windows 7 from my laptop?

  I currently have win7 on my laptop, but I don't see how to format my hard drive and delete everything on it.
  In the old days, I could just reach BACK and type format c: / and it was done.

  That's progress for you I guess ;-)

  I also want to remove the de facto partition of Toshiba hard disk as well.

  Any help is appreciated.
  Only of responses please, not "why do you do this?

  OK, I understand what you want to remove, but the question is what you want to do after removing it from the HARD drive?
  You want to install the OS with the help of upgraders Toshiba CD/DVD?
  If Yes this. Before installing recovery starts the disk HARD integer will be deleted and formatted.