Urgent! Lost project

Similar Questions

• Lost project

  I don't know how I did it, but I lost an entire project. The name of it is displayed in the upper left corner of the window, but nothing is in the timeline, but a box of import media. How did I get here? I had a project called, for example, XX. I have an article from XX to copy to the new project + command + C but could not find a way to close XX. With no part of the selected XX, I was exploring opportunities in project, events, new projects, etc. In any case, I'm sure, did I clicked remove all or anything that looks like delete. I create a new project, YY and tried to command-V of article XX, but that did nothing. I quit iMovie and revived. Now, I can not find XX. The XX name appears in the library, but he has an empty timeline. What a waste. What should do? Thank you

  Since you have xx project showing at the top left, then you still have the project. You have an event in the list of library called xx? If so, it is your media. If this isn't the case, then you removed media. To do what you want and then select the section of the film in the scenario that you want to copy into a new project. Use command + c to copy. Click the project tab and in the project window to create a new movie. It will open in the editing window. Click in the timeline panel to activate it and command + v to paste your clips copied.

• is it possible to recover a lost project

  trying to save a project to an email he just disappeared leaving behind "it" (that's all). What is recoverable in some way

  Firefox send an e-mail, it's a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Windows Movie Maker lost project

  I worked on a WMM project for a week, saving and opening with success every day. Now, I'm going to open and he said: it has not been saved since the first day. Why is this? And how can we recover the last saved version? Help, please

  Hi jimbospurs91,

  To restore the previous version of the project file follow these steps:

  1. right click on the file or folder and then click restore previous versions.

  2. click on an item in the list and then click restore.

  You will see a list of the available versions of previous of the file or folder. The list includes files saved on backup as shadow copies, if both types are available.

  For more information, see this link.

  Previous versions of files: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost project - can use the files transcoded to yet?

  I had a serious accident on my system, and if I was able to restore most from a backup, I have a project where the source files have disappeared. I have the files transcoded in encore, it's xxx.ac3, xxx. M4V and xxx.m4v.xmpses. I can read the reminder film, but is it possible that I can make a video of these files? The format is Blu Ray. I tried to write to the directory of the BD and BD .iso file, but when I try to play, I don't have the sound, the video is just a black scree.

  Best regards

  Ulf

  That sounds about right.

  From windows Explorer, you can play the file xxx.m4v?

• Lost projects

  Hi, I used to have photoshop on my android Tablet touch, but now it's broken. My projects were in sync on the cloud. How to get to them a conventional laptop?

  Thks

  Sign in with the same Adobe ID to https://assets.adobe.com and you should see your PS files touch there.

• AfterEffects crashed, lost project. How to recover?

  OK, so I was working on a project After Effects CS 5.5, when suddenly it crashed. I had not backed up, but I hope it was on automatic. Is there a way to retrieve my project? It is very important and I don't have the time or patience to recreate it. Help, please!

  AutoSave will save only once you tell it where to save.

  The answer to each of you in the future to save early and save often. I tend to hit except right after that I have started a project to put in a folder structure. I certainly hit him in the first five minutes. Then, not only I have enabled AutoSave, I save every few minutes and I use the increment and save function whenever I make a big change or have worked for a long time. This means that I have several versions to return in case the customer decides that a previous idea is more what they want, or if something is damaged.

• Urgent: Connecting projects

  OK, I am using Captivate 5, and as you may know, there is a problem in the completion of a major project in a single SWF due to problems of memory resources.

  I am currently working on a very important project for my company and I had to work around this problem. so I divided my project in 6 different projects, hoping that I could relate to the option "click on the button. You are supposed to be able to bind the button to another project.

  So I did.

  But when I published the project, a popup says:

  the following files/projects are related to the open project. The related files/projects may require export.

  {(le nom de mon-censés pour être-projet lié)}

  It is also important copy all referenced files and projects with their file in the output folder HTML

  My links cannot be clicked.

  Of course, all my files are in the same folder (even if she's not cool) and I tried with the html file and the swf file.

  ...

  I have to finish my project for next week... so please, help me!

  Hello.

  I suggest the following steps. Try them and let us know

  1. for the click button, select the action as 'Open the other project' and select it. CPTX of the next project you want to open.

  2. now publish all 6 projects in 6 separate files.

  3 copy the contents of all folders in the file project1.

  Now link should work as expected. Find out and let me know.

  -Ashwin

• Change in Date of Expiration of SWF movie? (lost project files)

  Hello, big fan of Captivate and now use Captivate 3.
  
  Use us it for our customer demonstrations and training tutorials.
  
  One of my presentations took about 12 hours to 'film' - I saved this project with an expiry date of the film, as it is a sales presentation and I don't want to keep the old demos around people.
  
  In any case... a careless click told delete the source files in Captivate. I have still my movies out... is there a way I can open movies and push my day of expiration, or I'm ' up a certain Creek without a paddle?'. "
  
  I had to ask before to sit and re-registration of the entire movie... was hoping to have a Normal weekend, but maybe not?
  
  Best regards
  
  -steve

  Hi Steve

  If all you need is to buy extra time for the movie, consider simply changing the time system of the computer running the demo. There is nothing that I know in the file which would avoid this. This could then buy you some time to recreate this source file.

  You can also nail the development team to create a Captivate content decompiler. Something that sucks in a Captivate created. EXE or. SWF file and spit on a functional. CP file. You can do this by clicking here.

  See you soon... Rick

• How to get back my projects on illustrator draw app after an accidental deletion?

  I accidentally deleted a whole project on Adobe illustrator App on my ipad 2, how do I get it back?

  Unfortunately, once you type in two confirmation dialog boxes to remove, there is little you can do to recover the lost project. There are two ways that it can be recovered, but it requires some special circumstances.

  1. If you were offline when you deleted the project, then the deletion has not yet synchronized to the cloud. In this case, stay offline on your device and connect to assets.adobe.com on your desktop. Search for your project in the 'Mobile Créations' section and make a change to the project (for example. Rename it to something else). Then, when your iPad comes back online, the new edition will cancel the deletion and your project must obtain synchronized down to your device.

  2. If deletion has already made it back to the cloud and you can no longer find your project on assets.adobe.com, so if you have another device (phone or Tablet) which has installed circulation, you can try to disconnect this device, launch the draw and make any changes to the project locally (for example. Rename it to something else). Then, when this device comes back online, the new edition will cancel the deletion and your project must be re-downloaded back to the cloud. From there, you can download return anywhere that you have to draw.

  Hope that helps,

  Frank

  Engineering drawing

• deleted recovery projects in Adobe Sketch

  someone knows a way to recover a project deleted in the Adobe Sketch application.  I made the mistake of accidental deletion of one. lost about 3 sketches.

  Hello, Bernadette.

  Unfortunately, once you type in two confirmation dialog boxes to remove, there is little you can do to recover the lost project. There are two ways that it can be recovered, but it requires some special circumstances.

  1. If you were offline when you deleted the project, then the deletion has not yet synchronized to the cloud. In this case, stay offline on your device and connect to http://assets.adobe.com on your desktop. Search for your project in the 'Mobile Créations' section and make a change to the project (for example. Rename it to something else). Then, when your iPad comes back online, the new edition will cancel the deletion and your project must synchronize down to your device.

  2. If deletion has already made it back to the cloud and you can no longer find your project on assets.adobe.com, so if you have another device (phone or Tablet) which has installed circulation, you can try to disconnect this device, launch the draw and make any changes to the project locally (for example. Rename it to something else). Then, when this device comes back online, the new edition will cancel the deletion and your project must be re-downloaded back to the cloud. From there, you can download return anywhere that you have to draw.

  I know that doesn't help right now, but we are working on the integration of the ability to recover accidentally deleted projects.

  Sue.

• Display driver D009tu from HP for windows 7 Professional 32-bit

  Support hp Hai team

  IAM bought hp 15-d009tu laptop computer for business use and installed windows 7 32-bit professional try display type 15 to 30 drivers are downloaded its not supporting. Error message are the system shouldn't the requirement please you help me don't its very urgent lost your confidence

  This is the link to the W7 x 64 graphics driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714&lang=eng&ProdId=3719

  Supports Intel® HD graphics on:
  
  Intel® Pentium® Processor 1403, v2 M v2/1405/2020 / 2030 M/2117U /.
  2129Y/2127U/A1018/G2010/G2020/G2020T/G2030/G2030T/G2100T /.
  G2120, G2120T, G2130, G2140
  Intel® Celeron® Processor 927UE / 1000M / 1005 M, 1007U, 1017U, 1019Y.
  1020E / 1020 M, 1037U, 1047UE, G1610 not/G1610T/G1620/G1620T/G1630
  Intel® Pentium® Processor 3550 M/3556U/3558U/3560Y/3561Y/G3220 /.
  G3220T/G3320TE/G3420/G3420T/G3430
  Intel® Celeron® Processor 2000E/2002F / 2950 M, 2955U, 2957U, 2961Y.
  2980U/2981U/G1820/G1820T/G1820TE/G1830
  Intel® Celeron® processor J1750 / J1800/J1850/J1900/N2805/N2806/N2807 /.
  N 2810/N2815/N2820/N2830/N2910/N2920/N2930
  Processor Intel® Pentium® J2850/J2900/N3510/N3520/N3530

• First fall of 13 items

  I have created a short, less than 2 minutes, and then tried to make it.  After a few minutes an error message appeared, "problem", and crashed shortly after EP 13.  It seems I've lost the entire project - a lot of work!

  I'm new to Premiere Elements so maybe that there is always a project file somewhere on my computer?

  I was very happy with the software until this happened, but now I'm afraid to continue until I can be sure that my work will be not lost.

  MacBook Pro

  OSX 10.9.4

  2.9 ghz i7

  8 GB ram

  saswatch

  Good news about find and have managed what was considered to be a lost project. Great job.

  As for downloads on Social sites.

  a. you can check the integrity of your site account Social Web by exporting your calendar in a file recorded in the classical approach

  the hard drive of the computer and then download this file saved on the Social site to its web site.

  Internet... side opportunities include:

  a. for the browser, disable caching Web Content under advanced / network

  b. stop the router for about 35 to 45 seconds

  c. go in Edit Menu/Preferences/Web sharing and updating Services online.

  Please let us know if the foregoing helped.

  Thank you.

  RTA

• Dell Optiplex 745 with Broadcom NetXtreme 57xx Gigabit Controller with Windows 7 x 64 host cannot fill network

  All, I am new to the forum but have been reading up on top of a problem that had led me into a wall.

  I'm trying to create a development environment that uses VMWare Workstation 7.0.1 (and I tried with 7.0.0 before, leading me to)

  update in the hope of a quick solution) as a development of imaging and the test bench.  The system is a Dell Optiplex 745, upgraded to 8 GB of

  RAM.  Unfortunately, it seems that the biggest problem is the network card.

  I tried several different operating systems, and all DHCP requests are found in the AUTOMATIC private IP addressing.  This is even after I implemented a custom adapter (VMNet2) that fills explicitly to this network card problem.  I disabled VMNet0 and all because this dish was not working.  I have read some relevant

  messages, but nothing seems to help.  This included the http://communities.vmware.com/message/675649 and more

  positions listed on the registry settings.  I don't know what to do at this point.

  So, for those who do not know the Broadcom driver issues, they are apparently many.  It is important to disable the unloading, but

  I'm not able to find the settings in the post linked above.  It's quite similar to the OP for this thread.  I'm not

  know if it's a difference of conductor between the 32-bit and 64-bit implementations.  So, I updated from the version of the driver

  12.2.2.1 (b57nd60a.sys) of 10.100.0.0 (I think, can not driver rollback now to check because I need to work on VMS for urgent

  projects as soon as POSSIBLE).  So, as I said, I was unable to find the parameters of this post

  ()http://communities.vmware.com/thread/191085) mentioned below:

  • Large Send Offload (IPv4)

  • Large Send Offload v2 (IPv4)

  • Large Send Offload v2 (IPv6)

  What I found were these parameters:

  • Flow control (Auto, I tried to disable)

  • Priority and VLAN (priority & VLAN enabled; I tried priority and VLAN disabled)

  • Speed and Duplex (Knew better than to mess around here, has made the problems in the past, retired to Auto)

  • VLAN ID (always 0)

  • Wake Up Capabilities (Magic Packey; no one tried)

  • Unloading ARP (Enable; I tried to disable)

  • NS unloading (Enable; I tried to disable)

  I tried enabling / disabling all, specially those mentioning the unloading, all day without success.  This did not help.

  Later, I tried to add DontAddDefaultGateway, EnabledRSS and DisableTaskOffload keys to my CurrentControlSet on the

  host.  For some reason any DisableTaskOffload shows in the regedit, GUI, not the export of text.  Don't know what this means, and I'm too

  tired of care at this point.

  Host registry settings:

  Windows Registry Editor Version 5.00

  "ICSDomain"="mshome.net."

  "SyncDomainWithMembership" = DWORD: 00000001

  "NV Hostname"="HOME".

  "DataBasePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,

  00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.

  64,00,72,00,69,00,76,00,65,00,72,00,73,00 5 C 00, 65, 00, 74, 00, 63, 00, 00, 00

  "NameServer"=""

  "ForwardBroadcasts" = DWORD: 00000000

  "Domain"="domain.mei.contoso.com."

  'Hostname '=' HOME '.

  "SearchList"=""

  "UseDomainNameDevolution" = DWORD: 00000001

  "DeadGWDetectDefault" = DWORD: 00000001

  "DontAddDefaultGatewayDefault" = DWORD: 00000000

  "EnableWsd" = DWORD: 00000001

  "QualifyingDestinationThreshold" = dword:00000003

  "NV Domain"="domain.mei.contoso.com"

  "EnableRSS" = DWORD: 00000000

  "DhcpNameServer"="141.161.200.201 141.161.100.201".

  "DhcpDomain"="contoso.com".

  So, I'm not where that leaves me.  I am attaching a file vmx for a Windows XP (currently only started in WinPE) invited configured with bridged and IP information for the host and the guest.  If anyone can help me, I would be incredibly grateful.

  Guest VMX file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "7".

  maxvcpus = "4".

  scsi0. Present = 'TRUE '.

  memsize = '512 '.

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = 'Pharos PS.vmdk Test '.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. FileName = "C:\Users\%username%\Documents\ISOs\peboot.iso".

  IDE1:0. DeviceType = "cdrom-image".

  floppy0.filetype = 'file '.

  floppy0. FileName = "autoinst.flp".

  floppy0.clientDevice = "FALSE".

  ethernet0. Present = 'TRUE '.

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  Sound.Present = 'TRUE '.

  sound.startConnected = "FALSE".

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  MKS. Enable3D = 'TRUE '.

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  roamingVM.exitBehavior = 'go '.

  displayName = "Test Pharos PS"

  guestOS = "winxppro.

  NVRAM = "Test Pharos PS.nvram."

  virtualHW.productCompatibility = "hosted".

  easyInstall.keepFloppy = 'TRUE '.

  extendedConfigFile = 'Test Pharos PS.vmxf'

  ethernet0.generatedAddress = "00: 0C: 29:64:09:63.

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

  UUID. BIOS = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

  cleanShutdown = 'TRUE '.

  Replay.Supported = 'TRUE '.

  Replay.FileName = «»

  ide0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "16".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  ehci.pciSlotNumber = "35".

  vmci0.pciSlotNumber = '36 '.

  vmotion.checkpointFBSize = "134217728.

  USB:0. Present = 'TRUE '.

  USB:1.present = 'TRUE '.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1701054819".

  tools.remindInstall = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:0. DeviceType = "mouse".

  ethernet0.VNET = "VMnet2.

  ethernet0. ConnectionType = "custom".

  debugStub.winOffsets.version = "7".

  debugStub.winOffsets.value = "0 x 0, 88 x 84, 0 18 0 x 190 x, 0 x 174, 16, 416, 0x22c, 0 x 228, 0x1f0, 0 x 224, 0x20, 0x18, 0x18, 0x20, 0 x 24, 0x11c, 0 x 8, 0 0, 0, 4 x 0, 14 x 100000, 0xc, 0xc, 0x1b0, 0x18, 0x13c, 0x1f4.

  Host adapters:

  Windows IP configuration

  Name of the host...: TOWMI

  Suffix main Dns...: domain.mei.contoso.com

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: domain.mei.contoso.com

  Contoso.com

  Mei.contoso.com

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : contoso.com

  ... Description: Broadcom NetXtreme 57xx Gigabit Controller

  Physical address.... : 00-19-B9-38-5A-03

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::25cc:6bfc:91 has 9: d64d % 11 (Preferred)

  IPv4 address...: 10.205.3.136 (Preferred)

  ... Subnet mask: 255.255.254.0.

  Lease obtained...: Monday, 1 March 2010 16:00:06

  End of the lease...: Tuesday, March 2, 2010 16:00:05

  ... Default gateway. : 10.205.2.1.

  DHCP server...: 141.161.200.213

  DHCPv6 IOOKING...: 234887609

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers...: 141.161.200.201

  141.161.100.201

  NetBIOS over TCP/IP...: enabled

  Ethernet VMware Network adapter adapt VMnet1:

  The connection-specific DNS suffix. :

  ... Description: VMware Virtual Ethernet adapt for VMnet1

  Physical address.... : 00-50-56-C0-00-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::ace9:b312:d32d:fb39% 16 (Preferred)

  IPv4 address...: 192.168.58.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 352342102

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet VMware Network adapter adapt VMnet8:

  The connection-specific DNS suffix. :

  ... Description: VMware Virtual Ethernet adapt for VMnet8

  Physical address.... : 00-50-56-C0-00-08

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1c44:4e88:3178:4ccf % 17 (Preferred)

  IPv4 address: 192.168.168.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 369119318

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {4EF89CD9-7A7D-4B80-83C5-A56D5FA6D748}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {E03C7ECA-35DF-43C6-BCC8-08D2BB8E4233}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.contoso.com:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : contoso.com

  ... Description: Adapter Microsoft ISATAP #3

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Adapters of comments:

  Windows IP configuration

  The host... name: minint-et0ko7r

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: VMware accelerated AMD PCNet Adapter

  Physical address.... : 00-0C-29-64-09-63

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::8842:488e:b75:ec51 %2 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.236.81 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 33557545

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  See also my VNE screen capture and sample log file attached.  Thank you very much in advance for any help.

  Sorry, had to rub a small part of the newspaper for my own protection.

  Post edited by: alharaka

  I'm sorry, I completely forgot to reply to this topic yesterday (get distracted by a matter of work).    I'll be back today and noticed that you have marked this as answer.  The root cause of the problem was therefore one MAC address per port restriction put in place by your network management team?

• Corrupt leader Prime Minister

  For beginners... I just tried to post this thread and I don't think it worked so my apologies if it ends up getting posted twice.

  Now for my problem.  I was working in Premiere CS3 and was almost finished my project when my computer crashed and now that the file is corrupted and I can't open it.  Before going to the amount of work to restart of crazy that I would ask the question there... anyone knows anyway to recover my file.  I looked around online nothing helps, but I have seen that some suggested solutions for similar problems with programs such as Word and Excel, so I thought asking countrymen first users would be worth it.

  I know everyone has had this problem... but has anyone fixed?

  You are welcome and happy that I could help you.

  For me, a little bit of lost work is much better than a lost project. As well as automatic backup, I'm doing a series of Save_As and also Save_As_a_Copy (similar, but different). The Save_As_a_Copy is on a different HARD disk.

  Good luck

  Hunt