Similar Questions

• X 220 about USB 3.0 speed

  Recently, I've transferred a large amount of files from a capable laptop HDD USB3.0 and superspeed USB3.0 cable. When it is plugged into the USB3.0 slot on my laptop, the transfer rate was showed that only 48 MB/s instead of the theoretical 5 Gbps. I tried to plug into the slot 2.0 on my laptop, and showed the transfer rate 36 MB/s. No idea what could be the problem here?

  Well firstly it is 5 Gb/s, which is around 640 MB/s. Second speed of USB3.0 external hard drive is limited as a result of factors: the actual speed of 1) drive HARD, 2) USB 3.0 speed controller SATA bridge, speed host controller USB 3) 3.0, 4) USB 3.0 cable speed, 5) you the mode of file transfer speed.
  Referring to my experience, with a combination optimum X 220 can reach a maximum file transfer speed of 56 MB/s. There is usually a typical 48 MB/s.
  The main reason why speed is not as high as better theoretical due to article 2, the USB 3.0 to SATA bridge controller speed. Since its native speed of your HARD drive usually not faster than 70 MB/s, the bridge controller would take a 20% penalty to translate between the two interfaces.
  In other words, your case is all good.

• How do I know what software is causing the error to Windows Installer: lack of program

  original title: How do I know what software is causing the error to Windows Installer

  Windows XP

  When you get this message that keeps popping up every two hours-

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded

  may be missing or the upgrade patch may update a different bersion of the program.   Make sure that the program

  to be upgraded exists on your computer and that you have the good patch upgrade. ."

  How do find you the application or software, or the program is causing the problem.  ?

  It is a simple solution.

  Go in run, type: msiexec /Unregister 'press the ok button.

  Back to run, enter: msiexec/regserver "press ok.

  Youre thru. Restart the pc

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Explorer has caused an error in Kernel32.dll

  OK... I had recently installed Vista Ultimate Upgrade on an existing installation of the factory of Home Premium.  I don't know if this problem has occurred before the upgrade or not, as I have dual boot Vista and XP.  Understably, I tend to use XP ninety percent of the time.  Anyway, if I explore folders using Windows or Powerdesk File Explorer I get "Explorer has caused an error in Kernel32.dll" when the right click on ALL files.  Also, I get an error when you choose the "Device Manager" shortcut in the system window.  But I can open the Device Manager in the control panel list.  I did research to my heart's content.  For the life of me, I can't solve this question everything.  Help!  Please, I beg you. If need more info I adhere to me.  Thank you.

  Failing application explorer.exe, version 6.0.6001.18164, time stamp 0x4907e242, failed module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a76d, exception code 0xc0000005, offset 0x00048f47, process id 0 x 1168 error, start the application time 0x01c96c1e3f92be10.

  may be a problem of system files try this:

  Click on run in the start menu, if you have run here... try pressing Windows key + R and type SFC / SCANNOW (you will need to insert your windows cd/dvd in the drive) Microsoft Most Valuable Professional

• Windows Live Photo Gallery causes the error Code: 0 x 80010108

  I have a desktop XPS 8500 running Windows 7.  Love it except for one thing: Windows Live Photo Gallery causes the error Code: 0 x 80010108.  Yes, I x it down and go ahead and use my computer but like it to stop.  I have google code and there are a number of fixes called there for him - even though they claim.  But I was reluctant to download anything on sites I don't necessarily trust OR conform to change my registry to fix it.  Can someone recommend a cure to my problem?  I have confidence in this forum for more than 12 years and feel that you will not recommend something that might get me in trouble.

  Thank you

  Bessie

  Hi Bessie,

  Thanks for the reply. I suggest you to uninstall Windows Live Essentials from the computer and update to the latest version. You can download it from the link http://bit.ly/GQ9tPI . Please disconnect all the external devices connected to the computer (printers, external hard drives, flash drives) and do not have any CD/DVD in the drive while following the steps.

  Answer please if you have any questions.

• Latest updates installed (today) causing script error...

  Before installing the latest updates, our MRP program would produce a PDF file that can be printed / emailed.  After the update, I get the following error message: cannot export the report... file://jbserver/JobBOSS%20Server/Reporting/JBReport.vbs, then OU want to continue running scripts on this page?

  I know that 1 updates causes this error, but not that one, I would uninstall that one and be able to advise my company update not installing.

  Thank you!

  Hi Bob,

  We could identify that update (KB3102429) was the origin of the problem with us export our MRP system.  I uninstalled the update and then I hid it to avoid this update again in the future.  It is great for us, and everyone is back running.

  I hope that this solution will work for you.

  Best regards

  Holly

• What causes an error 503 0xfeedbeef backend

  What causes an error 503 0xfeedbeef backend

  Hello

  The problem is with the ISP, I suggest you to contact the ISP and verify.

• I would like some clarification on what is causing the error code 80040154

  It seems to crop in Live Essentials update on a regular basis, but I can't find all the details on the causes

  Additional information.
  I managed to get the Messenger to sign. Here's info on how although I \have no idea why this worked. I tried a new install with the same old results but happened to see a link to messenger and connect to web services. It took me to a page of Microsoft, and the best I can see is that he installed connections on social, utube, facebook and twitter sites, etc.. I make no use of these sites once he installed my Messenger came, I signed the as if nothing had ever been wrong. I have now idea why, but be it - it works.
  I would like to really know what causes the error code 80040154 for possible future needs.

  Please see the thread below for a possible answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-7-and-Windows-Live-Messenger-error-code/93f4d2e5-24ed-40c3-957d-a0ab9f53dac6

• Network traffic causing the error

  Have a 6300 and a whole new photo 7525 mart. The two will give a blue error screen and a screen to restart the printer at the same time after being connected to the network for some time. Reduced to two computers that I have no problem except if one of those computers. Someone at - it overview what applications network or bags may cause an error? Trying to work through to disable all services and startup programs, then activating them one at a time, but that takes forever to a reboot required after each of them. Windows 7 on both machines in question.

  Thanks for the suggestions. Could determine that it was a question of wndr3700. Tried the new dd - wrt firmware because net gear has not updated version 1 in addition to two years but stil have the problem. Configure a different router and it is fine. Don't know exactly, what is happening in the wireless signal, but at least I have a solid printer again. Thanks again for the help.

• Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error.

  Hi friends,

  I create three field A textfield,textfield B,C textfield and apply the formula with dynamic action.

  C = A + B.

  Now, I want to protect user could not be total change at point C, so I change it is property of the text field to display only and change in

  Settings-> save the Session State-> Yes

  After all changes when I ran page and provide the registry then it shows me error below.

  Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error, contact the administrator of the application for assistance.

  
  

  How to disable the total at point C when I use the dynamic action to calculate the Total of A + B.

  Thank you.

  
  

  
  

  
  

  Hi Maxence,

  1. in the case of a display one element

  Change your point of P67_C and change the State of Session Save-> No.

  2. in the case of a text field

  Change your point of P67_C and make it read-only

  go to the attributes of the HTML Form element-> readonly = "readonly".

  Hope this helps you,

  Kind regards

  Jitendra

• I get 'no more virtual tiles can be allocated' when you try the filter Shake reduction... anyone know what causes this error?

  I get 'no more virtual tiles can be allocated' when you try the filter Shake reduction... anyone know what causes this error? I always get on each blurry picture, I am trying to do a little better.

  This may result from the way in which the scratch disk is set up. Yo have a separate drive for the scratch?

• Extracts of cause script error when placed in different order

  In a new topic, I insert two snippets: SnippetA and SnippetB. All right.

  Now I want to come SnippetB SnippetA before, so I move (or delete and replace, or any other method, can be used for the modified order). Now in the preview or the compiled file, the subject gives a script error:

  

  Nothing is changed in the section except the order of the two code snippets and the file ehlpdhtm.js has never been touched.

  I came across this error in several circumstances, and I have never been able to understand what makes.

  Any ideas?

  ~ M Becker

  Windows 7, RH9.0.2.217

  Hello

  Look at the HTML code of the code snippets. At the bottom of the page, you can see that an event is added that fires when the page is opened. He doesn't do much of anything, in addition to causing an error. Remove the hand this code solved the problem in the files that you send me.

  I don't know about the order of the excerpt, but the difference (I guess) comes from the ID used by the script. The ID is perhaps unique in a subject, but not in another.

  Take a bow

  Willam

• A html link causes validation errors 45 (w3)?

  I have the following links on my site:

  http://www.srdar.org/employee/contact.aspx

  http://www.srdar.org/employee/contact.aspx?__EVENTVALIDATION=%2FwEWBwLu4rbEAwKE3KOaDQLN7Ob aCALdl9H7DAL06dDRBQKGhYbPBAKjuY % 2F % 2BCh90jZy3gHQFCJRLBGpOolpQWfXN & btn_elissa.x = 34 & btn_elis its there = 35

  The first takes you to "contact.aspx" in its default state, the second link will take you to "contact.aspx" as a view state saved, with different information. It works fine, no real problem...

  Except that it causes a series of validation errors (according to w3, the validation link is below). I have 5 links similar to this one on my menu bar, so each of my Web pages with 40-50 validation errors. Any ideas to rid errors and keep the links?

  http://validator.w3.org/check?URI=http%3A%2f%2Fwww.srdar.org%2Femployee%2FContact.aspx%3F _ _VIEWSTATE % 3D % 252FwEPDwULLTEwNjMwODQwODBkGAEFHl9fQ29udHJvbHNSZXF1aXJlUG9zdEJhY2tLZXlfXxYGB QhidG5fbWFpbgUKYnRuX2VsaXNzYQUIYnRuX2V1bGEFB2J0bl9EYW4FCWJ0bl9KYW1lcwUMYnRuX1ZpY3RvcmlhB3d LC8SIJZrKlA1UCz3yYxaYNzM % 253D % 26__EVENTVALIDATION % 3D % 252FwEWBwLu4rbEAwKE3KOaDQLN7ObaCALdl9 H7DAL06dDRBQKGhYbPBAKjuY%252F%252BCh90jZy3gHQFCJRLBGpOolpQWfXN%26btn_eula.x%3D38%26btn_eul a.y%3D47;accept=image%2Fgif%2C%20image%2Fx-xbitmap%2C%20image%2Fjpeg%2C%20image%2Fpjpeg%2C %20application%2Fxaml%2Bxml%2C%20application%2Fvnd.ms-xpsdocument%2C%20application%2Fx-ms-xbap %2C % 20application % 2Fx-ms-application %2C % 20application % 2Fx-shockwave-flash %2C 20applica tion%2Fmsword%2C%20application%2Fvnd.ms-powerpoint%2C%20application% 2Fvnd.MS-Excel%2C%20*% 2F % *; accept-language = en - us

  You have unescaped ampersands in your code.

  Replace & with & ampsemi-colon

  &
  

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Lenovo series k - disk error - press any key

  I have a brand new Lenovo computer. Its a center of the idea, and when I start it it says disk error - press any key. If someone has had this problem and to know what anyone on this subject? I work when I press "any key" but I'm worried that it could turn into a serious problem. Its only 2 days years the computer.

  Moderator edit: added detail to the subject.

  Oh never mind lenovo was trying to read my USB. Apparently you can not leave a flash drive in Lenovo you can HP. otherwise, I love this computer!