USBBT100 ver.2 technical question

Similar Questions

• Another reject for technical questions

  Hey guys,.

  I've been doing rejected by iTunes over the past two weeks.  I read about someone else having these questions and tried their corrections.  As adding an explicit label and changing the forced download, I thought I was the culprit, but again I get rejected.  I hope that another set of eyes might be able to spot something that I missed.  I listened to every episode and they all seem to work.  I subscribe to this stream in iTunes, and it seems to work.

  Any help would be greatly appreciated.

  Thanks again.

  http://spexandsuits.com/podcastfeed.XML

  If you need other info let me know

  Your "link" tag does not contain a clean URL - you must include the http://

  Your pubDate tags are technically incorrect (though iTunes has always seemed pretty relaxed on this issue - you

  Thursday, May 26, 2016 16:39:56 GMT - 0700 (Pacific daylight time)

  It should be

  Game, May 26, 2015 16:39:56 and then either PDT or GMT-0700 (not both and not the name of the area full time).

  In your tags 'enclosure', the 'length' attribute must be the size of the file in bytes, without comma.

  The 'guid' to your episode dessu tag reads

  < guid > podcast-2016-alien-1 < / guid >

  Because the content is not a URL should read

  < guid = 'false' isPermaLink > podcast-2016-alien-1 < / guid >

  but I'm not sure it's important in the store, but it could also well be fixed.

  But having said that, I just tried validating some Podcasts Connect food and is it...

• Technical questions about X 1 carbon Touch base

  Please forgive me, I'm still recovering after the shock and frustration generated by dealing with Lenovo Tech Support.

  I recently received my X 1 carbon Touch and I have tried to understand some - I think - fundamental questions.

  As you know, to win 8, Lenovo doesn't have a custom recovery solution / owner. However, there are a score of Lenovo recovery on the machine. I'm /assuming/ this, somehow, can be used through the default / built-in mechanisms of recovery Windows, but I want to know exactly how without necessarily experiencing myself with it.

  In addition, the computer seems to be equipped with a mechanism of alternative stand-by, fast recovery called Intel or something like that. It is enabled in the BIOS and apparently makes use of a hidden partition of ~ 8 GB on the SSD. However, I find no indication of this mechanism working. There are no settings that I could find in Windows. I changed the BIOS to 'Immediately' setting in order to test the functionality, but put the computer to sleep does not seem to generate behavior that is somehow different from regular sleep.

  In any case, I would like advice or information on my questions above. I understand works the thing of recovery fast in order to decide if I want to recover the partition or not. I would also like to know my options I should never need re - install the delivered factory OS without actually crossed the steps. I would also if someone could tell me the best way to get support from Lenovo.

  / * I called Lenovo technical support with these issues. The person sponsor and those to whom I then was sent to had no idea what I was talking about. They had difficulty understanding terms like partition, standby, sleep, resume, and even software/hardware and implementation. It was suggested that my computer may be Intel and Lenovo not... They seemed to really come from an age of the computer. I asked to speak with someone who would have some basics of the machine that Lenovo delivered to me. I find it reasonable. At that time, I was told to talk to a knowledgeable person, I have to pay a fee. Seriously?

  */

  elfstone,

  To find out how to work the various Windows recovery methods, please see this Microsoft Web site:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  The sole purpose of the recovery partition is to work with the "All delete and reinstall Windows" function of Windows 8.  If you have specific questions about the factory recovery that you can't get items from Microsoft, let me know.

  Regarding the plan of hibernation from Intel, as you noted, it takes a partition dedicated to your SSD which cannot be used for other purposes.  The only parameter in Windows is inside the application of arrangements of Lenovo in the power section.  Lenovo calls this function "in waiting for 30 days.  The only thing you can do is it turn on or off.  Here's how works "waiting for 30 days:

  1. When you close the lid, or otherwise put the system into standby mode, the system of standby for 3 hours.

  03:02 hours, the system will wake up and check things like not attached AC, wake-on-LAN not activated, USB device not attached, etc..  If conditions permit, the system will enter wakefulness of 30 days for example deep sleep.  If the system returns in normal mode to 'sleep'.

  3. deep sleep means that the content of the memory is written on the special hibernation on the SSD partition.  It is very similar to the traditional hibernation except what happens faster using methods of BIOS instead of Windows methods.  But this isn't anywhere near as fast as normal sleep/recovery.

  4. the system out of deep sleep when the cover is opened or when you press the power button.

  You have found the BIOS settings, but in fact they are ignored when Lenovo settings (and package of dependence of the Lenovo parameters) are installed on the system.  I don't really know why this design choice has been made.

  Personally, I don't see value in 30 days standby, not enough value to want to give up my expensive SSD 8 GB.  I exclusively use sleep/recovery.  The battery will last several days.  And if I'm going to be away from the computer for a long time, then I'll just stop it.

• How can adobe technical questions

  Adobe offers (free or paid) support for technical queries/issues by e-mail or by any other means. If so, how can approach us?

  If you have purchased DPS Professional Edition or Enterprise Edition, you are entitled Gold support. You can find Support Gold contact information in DPS dashboard.

  There is also support for customers who have purchased DPS edition simple or full membership of creative cloud.

  If you have not purchased any product of DPS you can post your questions on this forum.

• Deletion of songs: iTunes and Google Drive a technical Question

  I just moved my iTunes library on my Google Reader account so I can sync between my Mac and my PC. Everything is fine, but I just deleted some songs while on my PC. Now, I find these pieces and they still appear on my Mac, but of course when I try to read, it is said that they do not find. Is there anyway I can avoid showing them up on top of the unit in question at all after having deleted the songs? because the songs of the deletion of the library on the other device will get quite painful. What is a possible problem with a .itdb or incongruous .xml file? I don't know exactly how it works.

  Thank you

  It only will do this automatically if you use a single copy of the iTunes Library.itl file.  Only one copy of iTunes can have that open at a time.  Basically, iTunes uses this file to tell him what needs to be in your collection of real media files.  If you have separate library files then it obviously not synced and remove one will delete the file and the reference in this library, but not to delete the reference to the file in the other.  I've never used Google Reader so I don't know how 'real' a player is and if iTunes could run using the library of files on it. I feel maybe little too erratic and slow, a connection for a satisfactory performance and I'm hanging off the coast of another decade or two before confidence cloud services.

• Technical questions about the development on the BlackBerry PlayBook

  Hi, guys

  Hope this is the right place to post my thread...

  I was asked to develop an application on BB PlayBook (I'm an absolute beginner on this point, however), and now what I have to do is:

  place an image in my application, and tapping on the image, the application will open a. PDF file.

  However, I'm stuck here because I did some research on this one, looks like on BB PlayBook, the only way to open a. PDF file is to be opened with Adobe Reader (version BB). My 2 questions are:

  1. how to call the Adobe Reader to open a. PDF file in my application? I tried the "browseForOpen' from the 'File' class method, it opens a file picker in my application, and I can see the. PDF file here, however, when I select the file and click 'Open', it will not open the. File PDF... and, of course, it will not

  2. based on question 1, on BB OS tablet is it possible to open a file without showing up the "file selector"? I would like to have the opened file directly as long as I click on the image that links to the file.

  I would be grateful if you could give me a quick points up on this.

  PS: I use Adobe Flash Builder 4.5 as the dev. IDE and build up my app as a Flex app.

  See you soon!

  Terry

  Try the function navigateToURL (...). In addition, the class File (openWithDefaultApplication) and QNXApplication (openFile) class contains the methods to open applications preferred, based on a file.

  Before BBX 2.0 Beta, these two methods did the same thing (it didn't). It has been reported as a bug, but I'm not sure if that has been resolved. Need to try all 3 methods to see which works for your needs.

• Technical question... Please help

  I am a student and I received an invitation for a subscription of free creative cloud to a year of my school. I have install Dreamweaver, flash and fireworks cs6. I currently have cs6 Illustrator, Photoshop and InDesign. After I installed Dreamweaver, flash and fireworks cs6, I then updated Illustrator, Photoshop, InDesign, Dreamweaver, flash and fireworks cs6, but I get a failed to update for Photoshop. Another problem is when I go into Dreamweaver, illustrator and lights Fireworks, I get a "not responding" in the top left.

  Can someone help me with this questions?

  

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  I read a few posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• A technical question about Oracle11g GI - settings Clusterware: misscount

  Hello

  We are working on 2 - node RAC environment with below configuration

  Oracle11g 11.2.0.3.0

  ASM

  REHL 6.4 64bits

  As we know that misscount represents time in seconds that a heartbeat can be missed before entering a cluster reconfiguration to remove the node.

  Oracle default values for these parameters is the following:

  seconds 10g RAC 60

  11g RAC 30 seconds

  can configure us the misscount in 3 minutes or what is the recommended h/s or bone or the n/w configuration to avoid misscount reached the question?

  We have two available switches - Switch-A Primary and secondary switch B

  We use Cisco or nessus switches L2 or L3, which usually takes 3 minutes during the rocker switch / switch reboot/connector and unplug operation.

  We can over come this problem with the binding Configuration? What is recommended for the binding configuration mode (with A N1 and N2 with B)?

  What to do to overcome or hit the question of the achieved the best @ level CARS.

  Thanks in advance

  Hitgon

  It is not supported by oracle workaround switch failover to the misscount parameter.

  Consult the MoS note: calculation of CSS in Oracle Clusterware (Doc ID 294430.1) timeout

  I have, of course, that Oracle will not be supported, you set 3 minutes away from misscount.

  This will compromise the integrity of the cluster.

  Suppose that you set it. If you have any other related issue e.g. CPU or i/o starvation, Oracle wait 3 min to start the node.

  3 minute wait an IO operation is complete without warranty who is successfully completed is a big risk.

  Do not hesitate to ask the Support of Oracle.

• Technical question from the data store

  Hello everyone.

  I have a question that you can maybe answer:

  "Is it possible to have a WARNING message (check) before formatting a LUN (EMC)?"

  Let me explain:

  We currently have a datastore composed of 12 LUN (of 236 GB), and even if this isn't in the best practices of VMware, I made a mistake (und) when creating a new data store.

  Indeed, I used a logic unit number which was attached directly to a virtual machine (in Raw Device) pour set up my new data store.

  Would you have a solution that makes a data control (on the logic unit number) and which could see us the partition proposed pour extend the data store contains data!

  Thanks in advance for your answer!

  J. Gaspoz

  Hi Julien

  Nice to see you on communities

  The vCenter will list all LUNS that are not already in the "Add storage" wizzard data warehouses, and by definition, a RDM en of is not formatted VMFS, since the lun belongs to the VM and it met with filesystem clean so son.

  There is therefore no direct way to pour do what you're asking (UN ESX knows nothing about the data on a non-vmfs LUNs).

  Personally, plug-in a simple way: the LUN ID. All the LUNs that will be used in RDMS are presented to my ESX with UN LUN ID between 50 and 70 (f.ex.). So I know whether or not a lun is RDM.

  Otherwise maybe third-party products (rv maybe tools) can get out a report listing the VM using the RDM.

  I hope that helps!

  Best regards.

  Stéphane Grimbuhler

  Senior consultant virtualization & storage (VCP / VCAP-DCA)

  VMware instructor (VCI)

  My Blog: www.virtualgeek.ch

• Technical question about the naming conventions used in the API

  What does the prefix 'PF_' rest in all the function names in the SDK of EI?  It is not immediately obvious to me and was just curious.  I would like to have an idea of how the naming conventions came when I learn a new code.

  Thank you!

  Interesting question.  PF stands for package of plug-in filter in After Effects.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Technical question of indexation of Spotlight search

  I wonder about how the spotlight indexing process occurs and if maybe it's the cause of the problems of start and stop and the kernel panics.

  When live, I got used to print some articles in PDF format for later reading offline - or when I get the chance.  In November I started going through many articles and deleting or filing - and in the case of their deposit - I was deleting pages that were released just junk, so I did that article.

  If the PDF files have been indexed for content when I moved to different folders - or altered and saved - and if all goes well index deleted when I deleted them - would it have caused a problem when I stop this process.

  I got a stop where the system remained in market (light on mac pro 2008) but not asleep - then force a shutdown.   I had a tension where the projector showed that indexing - for about 10 seconds - without report.

  The console logs showed messages that a process completed- and kernel panic with no ID is.

  So is indexing made by MDS and MDS worker - and how will I know when indexing is complete prior to the stoppage.

  I changed the spotlight preferences to search only files - removed all the rest - but will they even indexed.

  And why - if the work must be done before the power off - Apple is not only to display a message on the screen!

  As the first users think seem to complain after an update - how to slow their macs (really busy busy) are - if it's just a bad thing worse.

  I'm on Snow Leopard - on Mac Pro 2008

  Additional information - I always stop after use as no point in leaving a system on when only used a few hours a day.

  My DirectoryService.error.log shows that inadequate completely new closures in 2008.

  Standard use - after - as the power outlet Strip which is controlled by a wall switch - I cut that.

  Something was still running and stop feeding ended this work - only that he might be the index - which I really do not use for detail on a PDF unless I want to scan something while it is open.

  I am now waiting the minute 1 stop & look at the light of itty bitty on the front of the tower to use it is over.

  My drive is less than 50% of the full - last cleaning was to make sure that it stays like that.

• X 360 spectrum: spectrum x 360 technical Question

  Hello. I plan to buy a new laptop and found that the spectrum series x 360 looks attractive.  A decision, however, I would like to know some characteristics of products not appearing only on the specifications page.

  1 how many locations does HDD/SSD have?

  My old laptop has two slots so that I can install it an SSD for OS and a HARD drive for data. Considering the size, I guess that's not likely to be true for this product. So what is the truth?

  2. where is the graphics card?

  Again, my old laptop was a graphics driver in the bottom left of the keyboard Panel. He has touched and warmed my wrist every time. I don't want to have such a problem again.

  3. does not provide a pen mode only?

  Thanks in advance!

  Hello

  1. it has only 1 slot,

  2. it has Intel HD Graphics 5500 on the motherboard with CPU,

  3. Please check the following options:

  http://store.HP.com/us/en/MDP/laptops/spectre-x360-211501--1

  Options may vary from time to time.

  Kind regards.

• technical question about the laptop LCD screen

  Hello

  I see in youtube change that a laptop screen is quiet easy.

  1 but is it dangerous to change the lamp or the laptop LCD converter when it is damaged?

  2. I know when the screen goes black and you can barely see an image in bright light you lost the lamp or the inverter, but how you can know if it is the inverter or the lamp?  because the inverter converts direct current to an electrical outlet which needs the lamp.

  Thank you

  Johan

  For assistance, contact the manufacturer of your laptop.  Thank you!

• Technical questions about Oracle Linux

  What is the ideal RAM should I assign to my virtual machine to run Oracle 12 c for personal use.

  Personal use - convenient, cloning, backup of the database. Recovery of database of .dbf file. Sqldeveloper execution. Thanks in advance.

  I did it with 2 GB of RAM dedicated to the virtual machine. If you host only has 4 GB of RAM, so you may not be able to run many other in the VM host upward.

  That being said, I have usually at least 8 GB of RAM on my laptop work/computers positions of our days, if not more. With 8GB, I can create a 4 GB VM and have a better experience.

  See you soon,.
  Brian