use a component more than once!

Similar Questions

• My keyboard is not save when I try to use a button more than once.

  My keyboard is not recording that I use a button more than once and it's causing problems with typing and use / the overall experience from my computer.
  If I try to go back an entire word, it will be only a matter of erasing and then the keyboard does not recognize that I use the back button back until I have use another first. Essentially, I am unable to use a button more than once, unless I hit another key.
  This problem does not extend to the buttons of the mouse and trackpad.
  This problem is not just with the keys to the letter, with all the control keys.
  I use a HP Mini with Windows XP Professional.

  Hi Danielle,

  The first two thoughts that come to mind are supposed to check and "fiddling" the following:

  1 Control Panel > keyboard > Ketboard Repeat Delay and/or keyboard repeat rate.

  2 panel > Ease of Access Center > facilitate the use of the keyboard > disable filter keys or to adjust the applicable rates, if you want to use them.

  I hope this helps.

  Good luck!

  Kosh

• Using the Variable more than once in a statement

  I tried searching but can't seem to find any other discussions where people have this problem.
  
  I use a select statement, and it contains, I have the same variable used several times. The problem is that when I run the statement, the substitution variable appears as many times as the variable appears in the declaration. It is not a show-stopper, but it's pretty boring. There is an option somewhere that I don't see who would do this work by popping only once?

  Normally you use bind variables (:) instead of substitution variables (&), but if you insist on using them, use DEF to define them before issueing your statement.

  Have fun
  K.

• HP 15-ab027tx: can I use discs of recovery more than once?

  I got a new HARD drive and I installed Windows 8.1 through recovery discs that I created, but I need to know that I can use these disks more than once.

  Hello

  Yes you can, there is no limit to the number of times that that they can be used.

  Kind regards

  DP - K

• What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  In the canvas on the box email, there is a parameter that must be checked in order to send the same e-mail several times for the same contact. Enable 'Allow emails to be retransmitted to previous winners' and you're ready.

  

• Can I use windows 8 recovery more than once?

  * Original title: recovery of Windows 8

  Can I use windows 8 recovery more than once?

  Hello

  You can use the recovery media to reinstall as many times as you wish, as long as there is only a single installation of the operating system installed at any time and if preinstalled recovery media is linked to this machine and cannot be transferred.

  See you soon.

• Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it h

  Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it happens that I write a few lines of code, but a built-in function already exists for the same thing. Is there a way to check it out ahead of time?

  An online resource are QAnywhere® to Adobe ActionScript 3 (AS3)

• Codes of the lesson can be used more than once?

  My students purchase the book for class and use the codes of the lesson in the back of the book. These codes may be used more than once? Sometimes my students buy used texts. Thank you!

  Yes, I use classroom in a book for Photoshop and InDesign. Thank you!

• why I can not go back more than once all of a sudden and double letters are not allowed?

  I have to reset the cursor to go back more than once and nothing can hit twice (the second will not be displayed) very very frustrated!

  Hello

  1. You did changes to the computer before the show?
  2. Is - this USB keyboard or wireless?
  3. What is the brand and model of the computer, the mouse and keyboard?
  4. What version of Windows are you using?
  5. The issue is limited to a particular application?

  Please follow the steps below.

  
  Method 1:
  Run the troubleshooter mentioned in the link below
  Windows Vista http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Windows 7: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2: Check the boot issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  NOTE: After completing the troubleshooting steps, please reset the computer to start as usual (see the STEP 7 of the article mentioned below)

  I hope this helps!

• How to add a container in another more than once in qml.

  Hi all

  I want to add a container to another container more than once, and many times will change according to the requirement. I try to add the container using JavaScript, but it does not work. I want to do this in qml not in the PRC.

  Please provide suggestion for this.

  Thanks in advance.

  You can use ComponentDefinition to declare the element you want to clone:

  https://developer.BlackBerry.com/Cascades/documentation/dev/dynamic_qml/

  Then create using .createObject and .add to the first container several times in a loop for.

  Another way is to create a ListView and manipulate it is dataModel to create a required number of points.

• Stop the link open more than once

  Hello!

  I created a button inside a document to Animate canvas.

  However when I click it, it opens to the severeral homepage times. Probably because that it loads the script whenever the timeline plays.

  How to prevent the load or avoid it to open more than once?

  The script im using is as follows:

  this.button.addEventListener ("click", fl_ClickToGoToWebPage_8);

  function fl_ClickToGoToWebPage_8() {}

  window.open ("http://www.adobe.com", "_blank");

  }

  One thing to do, you can try is to remoive the listener of events inside the function so that the button open is nothing, after the opening of the window.

  this.button.addEventListener ("click", fl_ClickToGoToWebPage_8);

  function fl_ClickToGoToWebPage_8() {}

  Window.Open ("http://www.adobe.com", "_blank");

  this.button.removeEventListener ("click", fl_ClickToGoToWebPage_8);

  }

  If you would like the option to reopen the window atr once then add the listener when the window is closed.

• can I use photoshop on more than 1 computer?

  Can I use photoshop on more than 1 computer at home?

  You can install an unlimited number of computers, https://creative.adobe.com/products/creative-cloud

  You can only be signed in to, at most, two computers to everything once, but adobe made it so easy to sign in and out, which is not really any limitation for a single user.

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• Multiple press: How can I make a button to perform an action more than once?

  I am currently creating an interactive document.

  I have a map with circular buttons to points of interest. I need information to fly from the right side of the page that gives information about the area of the map that is identified by each button.

  Currently, I have all my buttons and put activities in place to work, however, each button lights up only its animation assigned only once.

  If I click on "zone 1", it evokes conscientiously information of zone 1. I've also built in a button 'Close tab' that puts information to leave the screen to reveal a clear view map. I can click on the 'X' to remove the information. When I click on the button 'zone 1' once again, nothing happens.

  Here is what I tried:

  • using fly in and fly animations to control expected to come from off the screen.
  • using trajectories to control objects want to enter from off-screen.

  In both cases, the buttons and animations have interpreted as you wish, but I can't get them to repeat!

  Help, please!

  Thank you!

  If you decide to use the swf instead of pdf, here's a way to do this.

  'Information 1' comes up on the screen. Instead of having a close box to remove, do 'Information 1' button. Define the action of this newly created button: event [click] Animation of Action [Animation] [the name of the button] Options [back]. This will allow users to perform a 'information 1' go off the screen and should be able to activate the original animation more than once. If you need a sample file to see what I mean, I can send you a.

• repeating subforms can you script to stop the same value being selected more than once

  I have a LiveCycle form with a subform that is repeated when the first field (text field 2 characters) requires the entry of a code between 01 and 99. You can script so that you cannot enter the same value of code more than once?

  Here's a code in Formcalc that works for you. Put it in the output of the textfield event.

  In this example, the page is called myPage and textField is called TextField1. Rename them as you need.

  indexCount var = 0

  var thisIndex = $. parent.index

  While (indexCount< thisindex)="">

  If (myPage [indexCount]. TextField1 is myPage [thisIndex]. TextField1) then

  xfa.host.messageBox ("you already used this number")

  $ = ""

  endif

  indexCount = indexCount + 1

  endwhile