Use floppy disks with Windows XP.

Similar Questions

• How to install xp on a partition using cprompt, without using a floppy disk in windows 7

  I want to install windows XP in one partition of my hard drive and I tried to install using windows XP CD whenever I get to the installation of windows environment a blue screen will come telling me that windows has stopped to prevent the HDD to harm. And I tried all the solutions, I got online not it solved the problem. So, I want to perform the installation to the windows command prompt 7 without using floppy disks, all that I need on your part are the steps on how to perform the installation, thank you

  The most convenient way to install Windows XP on a computer that is running Windows 7 currently is to download and install the free Windows XP Mode.  However, you must run Windows 7 Professional or ultimate edition to install.  If you happen to be running Windows 7 Home Edition, you can purchase and install a Windows Anytime Upgrade: Windows 7 Home Premium to professional.

• format a blank disk with Windows 7

  How to format a blank disk with Windows 7?

  Question? Go you into computer, and then right-click the drive has? If not go ahead and do that and then in the list, there should be an option for formatting. Click on format and a window will be displayed, and then select the check boxes that you want to use, and then click the format button. This should be it.

  Hope this helps

• Windows 8 corrupted installation TrueCrypt encrypted another disk with Windows XP

  Hello, I need help. I just installed new Windows 8 on an empty partition of the secondary drive.

  The first drive I got the previous installation of Windows (XP). Unfortunately, I forgot, this hard drive is encrypted TrueCrypt. Windows 8 now works OK, but the disc with Windows XP seems to be empty. The other partition of the disk with Windows 8 works fine.

  I have the TrueCrypt rescue disk and he managed to restore the TrueCrypt Boot, but when I try to start, he writes, that no bootable partition was found. It allows us to decipher the drive and when I start it, it seems to work, but it is too slow and I need to know if this can help. Try to restore a Volume of TrueCrypt header in Windows 8 fails ("way of wrong installation, wrong password or not a TrueCrypt Volume"). Pourrait installing Windows 8 format the drive?

  (Sorry for my bad English)

  Later: I tried data recovery, and it shows some files and folders http://postimg.org/image/9xt33kmw5/

  Hi Daniel,.

  The drive that contains Windows XP displays empty because the file format of Windows XP is FAT (File allocation table) that is not supported by Windows 8. Windows 8 uses NTFS (New Technology File System). I would say to contact TrueCrypt support to check why the description of disk takes a long time. In Windows 8 If you want to encrypt or decrypt the data, you can use bit-locker installation. I suggest you to see the following links for more information on encryption of bit-locker.

  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker#1TC=T1
  http://Windows.Microsoft.com/en-in/Windows-8/using-BitLocker-Drive-encryption
  http://Windows.Microsoft.com/en-in/Windows-8/unlock-BitLocker-protected-drive
  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker-recovery-keys-FAQ

• The use of devices with Windows 8

  Hi all

  I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

  Take a look at this document, which covers:

  I hope that this document provides assistance.

  Good luck!

• my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  original title: Palm Treo 750 GSM Smartphone

  Looks like my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  It is understandable and disappointing.

  Is there any kind of emulator-type of a solution to synchronize?

  I ask because I don't have a data plan and need the cable to maintain contacts and calendar on the terminal entrances.

  Thank you

  Mike

  Hello
  
  I suggest you contact your hotline and check if it helps.
  
  http://palmsupport.org/Palm-support
   
   

• I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8

  I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8 OS. Fractured and the nonitor laptop monitor does not turn on during this process.  examplechoose an option scroll 2 3? I can't see ty ty

  Hi Masquerade,

  I suggest you to contact HP support.

  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• I use a PC with Windows 10 and Lightroom 6.1.1. When in the develop Module of Lightroom freezes when I try to edit the next picture after correcting the first.

  I use a PC with Windows 10 and Lightroom 6.1.1.  As soon as I want to move from a photo retouched to another in the develop Module, Lightroom freezes.  Can you help me?

  Hi Petra,

  > Try disabling the option of GPU in the Lightroom > edit > Preferences > Performance tab

  > Update your graphics card driver

  Hope this helps

  ~ Assani

• Try to mirror a disk with Windows 7 Professional

  I would like to mirror an external drive with a second external dive.  I can't find documentation on how to accomplish this task.  The main drive is configured as dynamic with a simple partition and it contains data.  I tried different configurations of the mirror planned but none seem "ungrey" option to add a mirror on the main disk drive.

  Any guidance would be appreciated.
  What more frustrating, it is only while creating an interlaced together in place is documented, mirroring doesn't seem to be.

  Hi Kfrey,

  Connect to the remote computer

  1. connect you as an administrator or as a member of the Administrators group.

  2. click on start and then click Control Panel. Click performance and Maintenance, click Administrative Tools and then double-click computer management.

  3. right click on the (Local) computer management and then click on connect to another computer.

  4. click on another computer, type the name of the computer to which you want to connect, and then click OK. Or, click Browse to locate the computer, and then click OK twice.

  The computer from the remote computer management window is displayed. Expand storage (if it is not already expanded) and then click Disk Management.

  Create a mirrored on the remote computer Volume

  1. in the disk management window, right-click on the space unallocated on one of the dynamic disks in which you want to create the volume mirrored and then click New Volume.

  2. in the new Volume Wizard, click Next.

  3. click on the mirrored volume, and then click Next.

  4. under all available dynamic disks, click the disk in which you want to host the mirror, and then click Add. Verify that the disks in which you want to create a mirrored volume are listed in the selected dynamic disks box.

  5. in the size box, specify the amount of unallocated disk space to use for the volume, and then click Next.

  6 assign a drive letter or path, and then click Next.

  7. set the options for formatting that you want to use, and then click Next.

  8. check that the options that you selected are correct, and then click Finish. The mirrored volume is created and appears in the dynamic disks in the disk management window.

  9 leave the management of the disks on the remote computer.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think

• can I use 3.1 with Windows 10 Audition (which I believe is 64-bit)?

  I want to install hearing on a computer running Windows 10, it will be OK sork on a 64 bit system?

  You can get almost always old software to work with windows, but you may need to use compatibility mode to install it.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• using a pc with windows 7 pro, in the print LR 6 cc module I'm not able to find the button configuration page on the left side of the bottom of the screen, where is it?

  Running a pc with windows 7 pro, in LR 6 CC in the print module.  In the lower left corner of the screen, there is only a 'page setup' button and it heading me information of "printer setup".   Must have 2 buttons in the lower left corner of the screen... "the installation and configuration of printing the page program" cannot access information 'page layout'... need some help here.

  Tom Glendenning

  < < edited by moderator > >

  Under Windows, there is only one button.

  It's Mac OS which has 2 buttons.

  What exactly do you miss?

• Re: Using Recovery Disk with portable Satellite

  This laptop seems to have a virus that passes without being detected by Windows Defender and Avast.
  After about 10 minutes, everything slows down, and sometimes the screen turns off. Sometimes it takes 10 minutes to make something happen.

  So I figure it of time to use the recovery discs that I did when I bought the computer - about a year ago. I thought that by putting the recovery drive #1 DVD in the drive and reboot it would start automatically (Windows Vista). But nothing happens. So, how can I reload the operating system from the recovery disk?

  Best Buy wants $200 to do, but I would do it myself. Help!

  Hello

  It is easy to do:

  Start your laptop and press the F12 key repeatedly Boot Menu will appear
  Put recovery media in the optical disc drive
  With the help of the arrows (UP/DOWN) select the CD-ROM drive, and then press ENTER
  Installation will start and please just follow the menu on the screen.

  Please let us know if everything was OK.

• Move the disk with Windows 7 to a new box

  I have Windows 7 installed on the drive HARD n ° 1 of my Compaq desktop computer.  The power supply fails to start (with the light flashing on the PS).  I have another almost identical box with a faster processor and more than 50% of available memory.  The disk HARD #2 in the box Windows 7, but it is indicating that he is not an authorized copy.  I would like to move the HARD disk #1 to the new box and wipe the old disk, HARD drive #2 to use for storage, etc.  When I installed the HARD drive #1 existing, HDD #2, I can see the #1 disk, but it does not start to it.  I can access the files #1 but I can't to start her.

  I tried to boot on it in the start menu, but it does not start.

  I can make this transition?  What should I do to make this work?

  Still don't give us the information complete, that we need.

  It's a detail or full an OEM System Builders license for the edition of Windows 7 Ultimate?

  Everything you say is that you bought.

  «I've recently updated the HARD drive #1 XP to Windows 7 with an official version of the software.»

  If it is full retail Windows 7 Ultimate license make a clean install with it on the second machine.

  How to do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  And make sure that you have only installed on a hard drive in a single machine

  Using this method may require phone Activation.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  See you soon.

• Portege R830 PT320E: Use of fingerprints with Windows Biometric Framework

  + Question: +.

  Is it possible to use the management software of fingerprint Authentec Truesuite AES1660 from toshiba with a compatible driver WBF? Is there an alternative freeware for enforcement truesuite using Windows Biometric Framework WBF?

  Hi people,

  I intend to use my good old roboform application in combination with the build page in fingerprintreader. The application can recognize only a fingerprint scanner driver that takes advantage of the WBF (Windows Biometric Framework) + a fingerprints like truesuite management software.

  The toshiba driver uses no WBF (you won´t find an icon of the biometrice device in the control panal).
  The way that it work´s if you use the pilot train Authentec.

  But then the biometric application in the control panal informs you that a management application is necessary (but you are not able to get the application truesuite (toshiba) as a software without the toshiba driver).

  So the way is to use the TrueSuite application downloadable on the Authentec Web site, but this will cause additional costs.

  Help, please.
  Arnd

  Hello

  Looks like you need to use the Authentec software.

  As far as I know you can download the software for R830 of AuthenTec fingerprint from the European pilot of Toshiba page but this version of the software only works with WIN XP.

  For Win 7 32 bit and 64 bit, you can download the software of Toshiba fingerprint.

• How to format the disk with Windows Vista to install Windows XP

  Hi, I would like to format my laptop and put Windows XP, but when I tried to start using the XP cd does not recognize the HARD drive, the type of my HARD disk is SATA
  I think that I need to download specific drivers, but I found no drivers on the toshiba Web page
  Thank you

  Hi Bertoni

  Sorry, but I must be honest now: I am ready to help, but I hate it when someone write about problems, but not write a which model of laptop. How to check the download page and you give any information when nobody knows what model of laptop you have?

  Let us know what model of laptop you have and we can continue the discussion. Otherwise visit category where your laptop and I am 100% sure that you will find the right answer it?