Use Folder.userData to get the name of the user? (Windows/CS5)

Similar Questions

• JI downloaded cs6 design and web premium in a single folder, I always get the message missing archives... I use pc and ie10 none of the solutions proposed if you please

  I downloaded cs6 design and web premium in a single folder, I always get the message missing archives... I use pc and ie10 none of the solutions proposed if you please

  Hello

  Some Windows product downloads include two files: a file .exe and .7z file. To install the software, it is necessary that the two files are downloaded and located in the same folder. Otherwise, an error may occur when you start the Setup program. Errors are "Windows cannot open this file" and "file archive part Adobe [product name] is missing."

  You can check the link for more information below.

  Start the program installation after the download Acrobat X, CS5.5 and earlier versions

  Please try the link below to download the product again.

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  I hope this helps.

  Kind regards

  Vivet

• How to get the full username by the user windows login name?

  Hello.

  I need determine the full username by the user Windows logon name. Where are many ways to determine the logon user name. For example application property node App.UserName or % variable %username% in cmd. But I found that one way to determine the full username by connected on behalf of the user - command net 'user' in cmd. This way is very slow and requires a huge code (I do get logged in user name, check if the connected local user or domain, create the command net 'user', find in output full username).

  Is there a simpler way without using cmd?

  PS, Full user name is displayed in the Windows logon screen and on the start menu and can be different from the name of the user.

  Here which may help: https://decibel.ni.com/content/docs/DOC-24358

• How to get the user name during the execution of a workflow?

  Here's what I would do:

  Say that each user is allowed to have 4 instances QA, create a workflow when a user run from vCenter plugin, it must be able to get the user name of the SSO user jsmith, and then he questions if there is an existing virtual machine jsmith_qa1, jsmith_qa2,jsmith_qa4, etc., if there isn't one, then create one for him; If not, indicate to the user that there are already 4 cases.

  I found that I can use getCurrentLdapUser to get [email protected] , now I want to remove the domain.name (there are several areas):

  username = actionResult.userPrincipalName.replace ("@[a - z].") +","");

  This does not work. Anyone know where I can find the right document for the document script of vRealize Orchestrator?

  Thank you!

  Jack

  vRO uses javascript as its scripting engine.

  UPN var = actionResult.userPrincipalName;

  var username = upn.substring (0, upn.indexOf("@"));

  Something like this will give what you want. You could also do a replacement, but I think that you should remove the quotes around the regex and use "/" instead.

  username = actionResult.userPrincipalName.replace (/ @[a - z] "+ /," "");

  Paul

• Lets get the user name in the workspace of BPM ADF Managed Bean

  Hi all
  
  I used JSF, and ADF to build the user interface for the task. And I want to get the user name of the user who is handling on workspace of BPM. For example, an ADF form may display the username of the current user in the workspace of BPM. I also try this approach: use handle Bean and bind this bean to a text output in the form of the ADF. The code fragment that I use to get the current user name is:
  ADFContext.getCurrent () .getSecurityContext () .getUserPrincipal () .getName ();
  
  But it does not work. The value I get is anonymous.
  
  So, please help me solve this problem

  Hello, please try this feature as below:

  public String getUserLogin() get WorkflowException,
  BPMIdentityException,
  {BPMUnsupportedAttributeException}
  String userId = "";
  IWorkflowServiceClient wfSvcClient;
  ITaskQueryService queryService.
  IWorkflowContext wfContext;

  Get the username of the user login
  String contextStr = ADFWorklistBeanUtil.getWorklistContextId ();
  wfSvcClient = WorkflowService.getWorkflowServiceClient ();
  queryService = wfSvcClient.getTaskQueryService ();
  wfContext = queryService.getWorkflowContext (contextStr);
  userId = wfContext.getUser ();

  Returns the user name;
  }

  Kind regards.

• Dreamweaver connection "How can I get the user name to the other page?

  im a beginner in Dreamweaver CS4 and I'm learning to just watch the tutorial videos...

  I have a big problem...

  ADWCS4 is easy to make a login form...

  
  for these tutorials I watch I have not meet how to get the user to another page name which connect...

  I'm using PHP

  hope you can answer my question

  http://forums.Adobe.com/thread/417437

• Get the user name in the select LOV

  Hello!
  
  I wonder if its possible to get the user name of the currently logged in user and pass it as a variable in a select statement used in a dynamic LOV in Oracle AS Portal?
  
  What I'm trying to do is pull all values in a table that corresponds to the current name of user to user on a portal report
  
  (as an approximate example)
  
  Select the color from mytable where username = 'whatever is the user name would be here. "
  
  And then the current user would get a list of values to select based on the values entered in this table.
  
  The issue I'm having is determine how to complete part "regardless of the user name is would be here" with the actual recorded in user name (or even if its possible). I know that on the portal, we can do #USER. FULLNAME # to display their username, is there a similar "variable", can be used to get the user name for a call to sql LOV?
  
  I can make it work if I statically resolve the user name to a particular value (ex: where username = "Joe.Hacker"), but I'm not sure if theres value a variable or a bind (for lack of better term) to enter the name of the user on the fly... dynamically.

  Portal.wwctx_api.get_User can be used in your report of Portal SQL query to get the user_name of the currently connected user portal. For more information about wwctx_api, see 10.1.2 portal API documentation or 10.1.4 at http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1012/index.html or http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/index.html

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Can I use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage

  Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem

  Hi susanearle,

  You can try the steps in your previous thread about this problem?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/have-wireless-connection-can-only-connect-from/12a7163c-A54D-4894-81F7-bd4fb92b2da4

  Please let us know, thanks!

• Installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Rufus can create a bootable copy instead:

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

• Classic mode by using the Alt + Tab - needs to get the active window

  I'm running Win7 Ultimate mode classic (the aero mode was just too much visual noise) and for years, I used the Alt + Tab to switch between applications. Starting with Vista, the content of the Alt + Tab pop-up window sorts and does not retain the positions she had in XP. Y at - it all the settings that I can change to get the unsorted window XP. With sorting darn, I'm looking for 'the' the window, I want to bring to the fore. I almost always several applications running (10-20) and several windows in each application, so it is not uncommon that I'll have 30-50 windows open when I'm researching a topic and try to create a document or a presentation on the topic.

  Hey jgt,
   
   
  Here is a workaround to get the classic Alt + Tab bar.
   
  1. open the Explorer Windows & a few applications so that you can start using Alt + Tab feature.
  2. press Alt + Tab keys to display the keys Alt + Tab bar.
  3. without releasing the keys, press another Alt key once and release the second ALT.

  Note: Do not release Alt + Tab again.
   
  4. now, press the Tab key to see the classic Alt + Tab bar.
   
  Note: You will need to repeat this procedure each time you want the feature back.
  If you are comfortable with the registry, you can disable the Aero Alt Tab permanently.

  If you are comfortable with the registry, you can disable the Aero Alt Tab permanently.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  To get the classic Alt Tab functionality in Windows 7 the Registry Editor:

  1. go to start, type regedit and press ENTER.
  2. go to the location following HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
  3. in the right pane, create a new DWORD AltTabSettings and set its value to 1.
  4. now, whenever you you press the keys "Alt + Tab" together, he'll show Windows XP style classic screen Switcher "Alt + Tab" rather than the new screen.
  5. to restore the default active Aero Switcher "Alt + Tab" screen, simply delete the DWORD AltTabSettings, created in step 3. Log out and sign in again to take effect.

  Hope that solves your problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the user name (the user who has registered their own personalized interactive report) in the application

  Hello

  I want to get the user name. Who saved their own custom application of the Apex report.

  If someone could please help to get user names.

  Thanks in advance.

  Kind regards

  Cyril S

  A possible source: see in the following metadata table: apex_application_page_Ir_rpt

  You will need the id of the application, the page id and the id of the report to the information, which is located in the application_user column...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• [MAF] How to get the user name and password after login?

  Hi Experts,

  I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.

  Authentication has been made with OAuth.

  I believe that there is an API to get the user name and password in the CRG

  See you soon,.

  Hendry

  Hello.

  You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.

  To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732

  In addition, you must attach the policy of security appropriate to the connection, as explained here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the