Use of AutoCad

Similar Questions

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• How to install AutoCAD 2007 on Windows 7?

  I recently bought a new system to upgrade to 64-bit with Windows 7 (home edition).  I would like to install an AutoCAD program on the new computer. Preference of AutoCAD 2007 ((j'ai les versions R14 et 2007))

  I do not own or operate a business, and my use of AutoCAD does not generate income, so it is not profitable to run out and buy a new copy of AutoCAD, whenever it is updated (GETS expensive).  Running out and purchase Autodesk - AutoCAD 2010 is therefore not an option.

  So what can I do to circulate and operate one of these two versions of AutoCAD on this new system?  ((I really need to do market.)) < pulls="" hair=""> > I thought conversion on Windows 7 XP would be GREAT... but NOW I'm starting to regret!

  Hello phnx428,

  Thanks for posting on the Microsoft answers Forum.

  The site of AutoCad:
  Both 32-bit and 64-bit AutoCAD® and AutoCAD LT® 2010 2010 are compatible and supported on Microsoft Windows® 7.

  Autodesk does not officially support the versions of AutoCAD and AutoCAD LT 2009 and older on Windows 7. If you choose to run older versions of AutoCAD on the Windows 7 operating system, you can opt to use the Windows compatibility mode.

  I would try to install in Compatibility Mode for XP or Vista. If you have an older application for Windows XP or Vista, which does not work in Windows 7, you can make it work properly by running the program in compatibility mode.

  1. to start, find the application or the shortcut which is the cause of the problem, and then right-click on it and select Properties.
  2. then, select compatibility in the menu tabs at the top of the properties page:
  3. now check the box run this program in compatibility mode "dethrone" and select the operating system you want to emulate. For most applications, this will be Windows XP SP2. Once you are finished, click OK.
  4. When you then run the application, it must run under compatibility using the OS mode you have selected. If it runs properly, try another selection of OS in step 3, and then try again.

  I hope that this will help solve your problem. If this isn't the case, you will need to communicate with AutoCad to see if there is no work around.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• DesignJet 800 42 ": Windows 10 and DesignJet 800

  Did anyone had success with the DesignJet 800 on Windows 10.  For some reason, HP seems to have abandoned this plotter and have no specific drivers for Windows 7.  In view of the other older conspirators such as the 70 and 500 are both supported on Windows 10, I find this very disappointing.

  Even with enabled bitmap printing, some systems have had problems printing to the DJ 800 on Windows 10 using the current DJ 800 driver at the time of the upgrade.  Even though the printer was present and its properties can be opened as usual, the pilot was rejected by trying to use in AutoCAD.

  In these cases, the printer have to be removed, sometimes forcibly through the registry, then reinstalled before it would work.  In others, DJ 800 driver failed altogether and the DJ 500 driver to be used, which was not always easy.  When the printer is shared from a server, the driver must sometimes be installed locally, then the installed shared printer and finally the local printer removed in order to leave the shared printer works.

  I've improved the DJ 800 RAM 192 MB, and it meant that bitmap printing can be disabled.

• How to open dwg attachments in mail on a mac

  I have a problem with the opening of any type of attachments in e-mail messages from the PC. I downloaded several programs, for example, dwg, jpeg, winmail.dat, but they can only open the text no attachments. I use the El capitan.

  The ".dwg" extension is used for AutoCAD drawing files.

  If you need to view only, try the eDrawings Viewer.  If you need to edit DWG files and are looking for a budget option, you can try the free version of DraftSight.

• Symbols of the forest

  I use the trial version of Ultiboard 10.1 Pro with permissions to export Gerber files for insurance before buying the product. I think I'm already sold on the package that I am also an owner of LabView and big fan.

  The idea of exporting the drill symbol Table is a great idea, but in Gerber format it is kind of useless for me. I really need the table of symbols in DXF format. Can I export all the layers very well - it works great!
  I can't see to get Table Drill symbols in DXF format.

  My policy on the companys on the AutoCAD drawing drill formats requires the drill symbol table & plot Board and each layer for inspection of PCB incomming.

  I hope that this issue will be addressed in a future release. At the moment, I have no way to meet the requirement for the drill symbol table in a format that I can use in AutoCAD.

  Or I'm just something wrong?

  Thank you
  Gary

  GaryAtAMI,

  Yes, sorry for the confusion on feature requests, please let me explain:

  When a feature is requested by the staff, it is not a guarantee that it will get into the product.   We have a lot of applications pending which do not get addressed in the product for various reasons and other factors.   Some of the reasons include that other higher priority requests get scheduled before these features (due to the frequency or severity of other applications - or other strategic initiatives) and/or other technical capabilities that could be hard to do within a single.  Some of them must be divided into several phases of the product then be implemented.

  For this feature, although this has been asked several times, I can certainly tell you that right now, we have no immediate plans to include this - because of competing priorities within the R & D.   We are starting to work on some of the underlying import / export capabilities Ultiboard, but right now I can't give you an exact date when this feature is applied.

  As a community, please continue to comment on how you feel on the priority level of this feature as we continually reassess these requests.

  OK, that being said, I have a possible work around.    However, it is not ideal, here is a solution of possible manual workaround that I used on several other designs to include the table of symbols in DXF.   Please let me know if this is feasible for you or not.

  1. you generate a table of symbols automatically .gbr file. (File-> Export...-> select Gerber RS - 274 X-> properties)

  1. navigate to the bottom of layers available and select "Drill symbol" and press the right arrow button (->) and press 'Ok '.

  1. press the button 'Export' with the type of Gerber RS-274 X selected.

  [At this point, you can use a third-party tool 3 to convert him Gerber to DXF format (last time I checked there are tools in the ~ $100 range)]

  To generate DXF manually Ultiboard

  2. open the .gbr just created...  He will be in the format "ProjectName (FileName) - drill symbols-copper copper-Top Bottom.gbr.

  3. copy the screen (depending on the size of PCB, you may need to copy multiple parts) in Microsoft Paint (I usually 2 copies of painting open)

  4 invert the colors so that the background is black and Council information is white.   Save this file with a black and white. BMP file (the background should now be black).

  5. in Ultiboard, within the same project, open a new design (you can copy the layer outline of the Board of Directors of the old design to scale BMP import properly)

  6. click on the mechanical layer (mechanics 1 or 2 mechanics) and choose the location-> chart-> photo... and choose the BMP black and white has created.

  7 draw a rectangular box to import BMP in the mechanical layer (you need to resize according to scale).

  [At this point, you can add some dimensional information for the Board of Directors]

  8. now given that the table and the jury is out on a physical layer of Ultiboard, you can export the mechanical layer in DXF format (file-> export-> DXF [choose Properties - 1 mechanics and Export DXF])

  OK, I didn't say it would be simple - and yes I do agree that an automated way would be better.   I zipped BMP and JPG images sample to show the imaged steps...

  Kind regards

  Patrick Noonan

  National Instruments

• If I replace my processor of pentium from Intel with an Intel i5 the rest of my system will be compatible?

  My laptop is the HP sleekbook, 15-b011nr version.  I bought it new with no previous owners. I love it, it's the perfect computer for me. According to me, there is no laptop better than what costs $198. I want to make a laptop faster so I can use it for the basic as well as the responsibilities of the school play. I don't think this thing is slow, but I know it's possible to make it faster. I know how to use extremely good computers, but don't know anything about their operation inside.

  Here is some info...

  Processor: Intel Pentium CPU 997 @ 1.60 GHz 1.60 GHz

  Installed memory: 4.00 GB (usable 3.90)

  System type: 64-bit, x 64 processor operating system

  I put it on performance mode so that it ignores the battery life and focuses on performance. (you get 2 hours even with performance mode)

  The games that I use it for;

  Program space kerbal (a NASA Simulator. This is the game that most need improved CPU)

  Arma2 (a combat simulator)

  World of tanks (tank Simulator)

  The school programs that I use;

  AutoCAD (3 versions)

  Microsoft Office (including powerpoint, word, exel...)

  General things that I want to go faster;

  copy and paste a bulky

  removal of bulky items

  Download (my Internet speed is big, so the limit is the speed of the computer can go)

  Can you help me?

  Here is your Service Manual:

  Manual

  First thing. The CPU is soldered to the motherboard so it won't be an upgrade of processor that is reasonably possible. Second, this thing is a bear to remove. Replace the memory module is on pages 69 and 70 of the manual, and there basically remove the motherboard to replace the memory. The hard drive is much easier. It culminates with 8 GB of RAM. You have an open slot so if you can get in there all you need to do is add a 4 GB of DDDR3 module - 1600 SO - DIMM. Works at 1333 mhz, it can use the speed of 1600. Make sure you do not try to mix memory 1.5 volts and 1.35 volts, and it would be better to go there, see what you have and buy another identical module. You have a very slow hard drive 5400 RPM and it would make the difference in the world if you install an SSD. He would fix most of the issues that you're not happy any other game, for which he will not do anything.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Adobe Acrobat 10 have I buy the right program?

  Buy Adobe Acrobat Standard for Windows 10 and tried to install it on my Dell Windows XP

  computer. I had an old computer that crashed last week and it was the bloody murder right on me for

  try to re - build things from the ground up on a somewhat newer computer. The old man had Adobe

  Acrobat on him and he allowed me to combine leaves of kitchen for my work equipment catalog, assemble

  together in one big file and then send it along to customers and other engineers. I also used

  That's when I opened Autocad files and created Adobe PDF of them (large drawings, 24 x 36, 30

  x 42, etc.). I could use my Autocad .ctb plotstyles to make pleasant contrast PDF, turned in the

  correct way, to share with clients and other engineers.

  It also allowed me to view a full-size shop drawings sent me for verification and have them

  Comments on these designs. Since my old computer is dead, I don't know what Adobe

  summer program.

  At this point, I did an uninstall because I couldn't make this work for my large, or even drawings

  to assemble a catalog cut sheets. I hope that someone out there knows what I'm talking about,

  can tell me if I have lost my $163.00, and give me a help. (Just an old guy trying to hang

  on with the old computers and hardware, but to reach the 'l' pill).

  If you purchased from or registered your adobe acrobat, go to your account to find the correct version - Adobe ID.

  Make sure that you use the adobe id when you purchased/registered.

  If you have purchased form someone else, check with the seller to find out what you have purchased.

  and you will need your serial number to activate your version of acrobat.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How wink on objects?

  Hi guys,.

  I don't know if this is a bug ID CS4 or sometimes I mix the ideas of change to work with Illustrator and InDesign, but wink on objects or objects the edges to be more precise, the rectangles in this case does not work good for me. I don't know if the snap is the word just for InDesign in English is the one I use in AutoCad. I Zoom in closely and even it is not perfect. If I turn on the guides, it will jump on the grid even if disabled (Snap to Grid). This is a sample.

  

  Furthermore, how can you quickly build this form? A rectangle divided into smaller ones, but they didn't snap with mathematical precision. Why is this?

  Thanks for any help or information on this topic,

  See you soon,.

  S

  Step and repeat

  Draw the first object to the desired width, i.e. 28mm

  Then CTRL ALT U (CMD OPT U) to bring up the step and repeat dialog box.

  In the horizontal section insert the width of the first box (28mm)

  Then increase the width of the next area, i.e. 35mm

  Then step, repeat and insert 35 mm for this object

  Then rinse and repeat.

• AutoCad and using the LaserJet Pro CM1415fnw

  I use Asus with Windows 7, 64 - bit with HP LaserJet Pro CM1415fnw, connect via the net, usb and wireless.

  I use AutoCad, but when I try to print, the AutoCad stops.

  Can print I have all other programs, without problem.

  Have tried to install the new porgrams printer, but the printer stops the program.

  There is problem with the installation of ' all programs ', - LJ-ProCM1415 full solution 12033 acf.exe, DVD and the internet.

  He stops and stops.

  It seems that HP have a problem with the software? What can they do?

  Is there anyone who can help me?

  Hi Bjornefjell,

  I found a PCL6 Universal Print Driver, you can download and install to try to run AutoCad, with your program to see if that helps.

  Drivers & software for HP Universal Print Driver series for Windows.

  Let me know the results.

  Thank you.

• Error 0xc000007b when using Autocad.

  I have an error message

  0xc000007b

  I have Canon open autocad! Help, please

  I don't no how to fix this error

  Thank you very much

  Oscar

  If it's your program, then it seems to be a common problem - http://forums.autodesk.com/t5/tag/0xc000007b/tg-p/tag-id/25168/category-id/3001

  There are some suggestions in some of these messages about the esp ' MSVCR100. DLL' replacement. I would advise not to download "all-out" on the internet, but there are alternative methods which means certain positions, and there are a few other possible corrections suggested.

  I have not tried one of these, just found by a search. I don't have the program or the problem, and it assumes that the link is on the same program that you are referring to.

  It will be useful. (at least until the other suggestions come in).

• I have autocad does not when I make a pdf file using autocad 2002 and adobe acrobat XI

  I have autocad does not when I make a pdf file using autocad 2002 and adobe acrobat XI

  We have adobe acrobat 8, on another system that seems to work correctly, what elsedo we do to get this trial version works properly.

  We are able get all been put in place, size, etc, but when the process starts it says "autocad does not and he just turns and never does the real final pdf.»

  Any help on this would be appreciated

  It's probably a compatibility problem with libraries updated PDF vs you desperately old ACAD that cannot be resolved. In any case, I would consider it one of those things to try to attack the problem on the wrong end. All major CAD software have native PDF export these days and same ACAD had at least since v2006...

  Mylenium

• When I try to open a. Using Autocad DWG, I always have to tell windows what program should I use to open this type of file.

  I always have to tell windows what programs use to open some files, even though I always tell him to use this program to open this type of file.

  Hello
   
  You can follow lionk below which may help you to solve your problem:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• AutoCAD LT97-want to use with Win7/8 (?)

  I currently use with a laptop Tosiba Satellite WIN7 Premium: a lot of memory and hard drive.  My ACAD LT97 software requires that I use a"drive Vertual XP (machine)? "and implement my ACAD LT97 it.  This Acad software does everything I need and well beyond.  I can't find something there that matches LT97 flexibility to allow my aiblity use.  So my question is: any version of WIN7 or update will allow me to use my software of CAD LT97 by installing from the CD that I paid for?  I will update to a later version of WIN7/8 to achieve, if it's not much.

  Unfortunately, you will need to consider using Windows Virtual PC with Windows XP Mode (which requires that you run Windows 7 Professional or ultimate edition). Or Oracle VirtualBox with your own condition of licence to Windows XP on Windows 8.